Home |
Search |
Today's Posts |
#152
![]() |
|||
|
|||
![]()
On Sun, 9 Apr 2017 11:17:12 -0500, Leon [email protected] wrote:
On 4/9/2017 9:20 AM, wrote: You don't need math AT ALL to get evenly spaced marks. Get some elastic tape from a sewing center. Mark it every two inches. Put one of the marks where you want the first hole to be. Stretch it to get the desired number of holes with the last hole being where you want the last hole to be. Done. https://www.youtube.com/watch?v=WtlPfXVjWKw Great for dress making, I guess. Yeah, that stuff stretches really well. |
#153
![]() |
|||
|
|||
![]()
On Saturday, August 20, 2011 at 3:53:17 PM UTC-5, Doug Miller wrote:
In article , "dadiOH" wrote: Doug Miller wrote: Then remeasure. You will find that: - your block is 152mm long. - you want a 6mm border at each end. No he doesn't, he wants 1/4" and 6mm doesn't equal that. Close but no cigar, so much for metric unless you can measure 6.35mm on that tape ![]() Do you *really* think that 0.35 millimeters (less than 14 thousandths of an inch) is going to be noticeable? Or are you just trying to be argumentative? Had enough of that from SWMBO this past week, don't need it from you too. This is an old, old, old theread. But could not resist. There are two types of countries in the world. The ones that use the metric systems, and the ones that have walked on the moon. You do the math. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Outlet spacing | Home Repair | |||
Spacing of guide holes in the 3-hole Kreg Pocket Hole Jig? | Woodworking | |||
Will single hole faucet fit widespread center hole? | Home Repair | |||
Modulator PAL B/G 6.5 MHZ sound spacing to B/G 5.5 or 6 Mhz s. spacing | Electronics Repair | |||
Milwaukee 5620 Router Industry Standard Hole Spacing? | Woodworking |