Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
|
LinkBack | Thread Tools | Display Modes |
#41
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On 6/28/2014 10:52 AM, Grant Edwards wrote:
On 2014-06-26, Grant Edwards wrote: On 2014-06-25, Spalted Walt wrote: Shot on location at The Woodwright's School, Pittsboro NC http://www.youtube.com/embed/VkSmaFAuaH4 I watched about half of that. Was it serious or was it supposed to be satire? When I watched the first few minutes, it was at work without audio, and it was baffling. I just watched the whole thing _with_ audio. It's brilliant. Absolutely brilliant. Bookmarked at 7:36. I anticipate many future applications. |
#42
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On 2014-06-30, Larry Kraus wrote:
On 6/28/2014 10:52 AM, Grant Edwards wrote: http://www.youtube.com/embed/VkSmaFAuaH4 I watched about half of that. Was it serious or was it supposed to be satire? When I watched the first few minutes, it was at work without audio, and it was baffling. I just watched the whole thing _with_ audio. It's brilliant. Absolutely brilliant. Bookmarked at 7:36. I anticipate many future applications. I'm still in awe of how well the whole thing was done. I loved how he referred to setting up a pencil sharpening "practice" rather than a "business" -- thus elevating being a pencil sharpener to the same category as being a lawyer or doctor. The classic 1940's leather train case for his equipment was a nice touch too. I do remeber being taught how to sharpen a pencil in junior high school shop class when we were doing a 9-week mechanical drawing course (using wooden pencils) -- and then again as a feshman at Penn State (using mechanical lead-holders). Of course there aren't any subjects that I take way too seriously and rant on and on about until all my fiends are ready to strangle me. [Did I tell you about the ad on Craig's List for a "Radio Alarm Saw", I'm assuming that one's due to auto-correct, but for dog's sake people, proof-read your ad when you're done. Or how about placing an ad which comprises (in its entirety) "Craftsman table saw: $275. North Metro" -- no photo, model number or specs. Craftsman has been selling table saws for something like 75 years, and has sold probably a few hundred different models. Of course when I'm shopping for a table saw, it doesn't matter which model it is, how old it is or what sort of shape it's in. What matters is that it's from the "north metro". Or how about the ad for "hand tools: $100 for everything in picture" with no picture. BTW, the guy tring to sell a $7 set of Menards house brand spade bits for $17 has updated his ad. There's now a picture of both the front and back of the blister pack. At least he spelled everything correctly.] -- Grant Edwards grant.b.edwards Yow! Hmmm ... an arrogant at bouquet with a subtle gmail.com suggestion of POLYVINYL CHLORIDE ... |
#43
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
Swingman wrote:
On 6/25/2014 11:51 PM, Gramps' shop wrote: Reminds me of the instructor in my high school mechanical drawing class who was fixated on how well we deployed his technique in sharpening the lead in our mechanical pencils. We used small hand held sanding blocks and I wish I would have saved one of them. Dayum! Had one of those teachers also. Our pencil leads had to be wedge shaped, with a very particular taper, and we were graded on how well we effected the proper shape, as well as maintained it through use. Occasionally he would confiscate a pencil from a student and test it. Can't complain though, it was when I began to realize the importance of "details" in getting things right(write). Not only did you learn to properly sharpen a pencil, but you leanred the much rarer skill of using "effect" properly as a VERB. A rare skill indeed. -- Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently. |
#44
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
Swingman wrote:
On 6/25/2014 11:51 PM, Gramps' shop wrote: Reminds me of the instructor in my high school mechanical drawing class who was fixated on how well we deployed his technique in sharpening the lead in our mechanical pencils. We used small hand held sanding blocks and I wish I would have saved one of them. Dayum! Had one of those teachers also. Our pencil leads had to be wedge shaped, with a very particular taper, and we were graded on how well we effected the proper shape, as well as maintained it through use. Occasionally he would confiscate a pencil from a student and test it. I would have liked to have seen that. Did he do it with an element of humor or fear? With my shop teachers, it was often hard to tell whether they were being funny or not (like when pointing to the picture taped to the drill press of a kid with half of the hair on his head missing). Can't complain though, it was when I began to realize the importance of "details" in getting things right(write). |
#45
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
Bill wrote in :
I would have liked to have seen that. Did he do it with an element of humor or fear? With my shop teachers, it was often hard to tell whether they were being funny or not (like when pointing to the picture taped to the drill press of a kid with half of the hair on his head missing). I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. It doesn't seem to be as big of problem with wood, as the wood doesn't provide as good of hold as metal or plastic. However, I've had a few times where the bit has grabbed and spun a small workpiece around. I also had one time where it grabbed and pulled the piece around and whacked the column. Better it than me. Puckdropper -- Make it to fit, don't make it fit. |
#46
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
Puckdropper wrote:
Bill wrote in : I would have liked to have seen that. Did he do it with an element of humor or fear? With my shop teachers, it was often hard to tell whether they were being funny or not (like when pointing to the picture taped to the drill press of a kid with half of the hair on his head missing). I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. It doesn't seem to be as big of problem with wood, as the wood doesn't provide as good of hold as metal or plastic. However, I've had a few times where the bit has grabbed and spun a small workpiece around. I also had one time where it grabbed and pulled the piece around and whacked the column. Better it than me. Yep, can't be too careful, huh! Puckdropper |
#47
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On 2014-07-22, Puckdropper puckdropper wrote:
I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. You take "corrective action" with a vise and/or clamps _before_ you lower the quill. It doesn't seem to be as big of problem with wood, as the wood doesn't provide as good of hold as metal or plastic. However, I've had a few times where the bit has grabbed and spun a small workpiece around. I also had one time where it grabbed and pulled the piece around and whacked the column. Better it than me. -- Grant Edwards grant.b.edwards Yow! I joined scientology at at a garage sale!! gmail.com |
#48
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
Puckdropper wrote:
I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. It doesn't seem to be as big of problem with wood, as the wood doesn't provide as good of hold as metal or plastic. However, I've had a few times where the bit has grabbed and spun a small workpiece around. I also had one time where it grabbed and pulled the piece around and whacked the column. Better it than me. No kidding Mister! I've had more than one piece come swinging around and whack my hand. It's always because I was trying to take a short cut and not secure things properly - figuring I could hold it just fine by hand. A spade bit can really grab into a piece of wood just before you complete the bore - and there you go! You'd think some people would learn over time... -- -Mike- |
#49
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
Grant Edwards wrote:
On 2014-07-22, Puckdropper puckdropper wrote: I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. You take "corrective action" with a vise and/or clamps _before_ you lower the quill. Yes... you do. Unless you don't... -- -Mike- |
#50
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
"Puckdropper" puckdropper(at)yahoo(dot)com wrote in message
eb.com Bill wrote in : I would have liked to have seen that. Did he do it with an element of humor or fear? With my shop teachers, it was often hard to tell whether they were being funny or not (like when pointing to the picture taped to the drill press of a kid with half of the hair on his head missing). I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. It doesn't seem to be as big of problem with wood, as the wood doesn't provide as good of hold as metal or plastic. However, I've had a few times where the bit has grabbed and spun a small workpiece around. I also had one time where it grabbed and pulled the piece around and whacked the column. Better it than me. That is why one clamps the work piece securely to the table. A fence helps too -- dadiOH ____________________________ Winters getting colder? Tired of the rat race? Taxes out of hand? Maybe just ready for a change? Check it out... http://www.floridaloghouse.net |
#51
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On 2014-07-22, Mike Marlow wrote:
Grant Edwards wrote: On 2014-07-22, Puckdropper puckdropper wrote: I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. You take "corrective action" with a vise and/or clamps _before_ you lower the quill. Yes... you do. Unless you don't... I get lazy and often don't when drilling in soft wood with twist drills 1/4" or smaller. Then I usually wish I had -- not because the bit grabbed the workpiece and whacked me with it, but because the hole didn't end up quite exactly where it should have. When using a spade or forstner bit, or pretty much anytime I drill metal, I grab the drill press vise and/or clamps. I do wish that there was a quicker way to bolt/unbolt the vise to the table. The bolts with plastic handle-nut things are better than having to get out a wrench, but not by much... -- Grant Edwards grant.b.edwards Yow! Uh-oh!! I forgot at to submit to COMPULSORY gmail.com URINALYSIS! |
#52
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On 7/22/2014 3:33 PM, dadiOH wrote:
That is why one clamps the work piece securely to the table. A fence helps too Bingo! Just fixing to post that that is exactly why I always use a fence when using the drill press. -- eWoodShop: www.eWoodShop.com Wood Shop: www.e-WoodShop.net https://www.google.com/+eWoodShop https://plus.google.com/+KarlCaillouet/posts http://www.custommade.com/by/ewoodshop/ KarlCaillouet@ (the obvious) |
#53
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On Tue, 22 Jul 2014 20:21:13 +0000 (UTC), Grant Edwards
wrote: On 2014-07-22, Puckdropper puckdropper wrote: I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. You take "corrective action" with a vise and/or clamps _before_ you lower the quill. Words to live by! ...at least a fence. |
#54
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On Wednesday, June 25, 2014 11:13:18 AM UTC-10, Spalted Walt wrote:
Shot on location at The Woodwright's School, Pittsboro NC http://www.youtube.com/embed/VkSmaFAuaH4 I would not send my pencils to this guy!!! He's obviously a hack and not a Certified Pencil Sharpening Artisan (CPSA) or even a Certified Pencil Sharpening Specialist(CPSS)!! His ratio of core to barrel is way off and the angle of the point way too steep. And the amount of graphite he left on the tip would give a low shaft gripper (LSG) black fingers. Maybe getting cut rate LASIK might be okay but DO NOT TRUST YOUR VALUABLE PENCILS WITH THIS FLAKE!!! |
#55
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
GeneT wrote in
: On Wednesday, June 25, 2014 11:13:18 AM UTC-10, Spalted Walt wrote: Shot on location at The Woodwright's School, Pittsboro NC http://www.youtube.com/embed/VkSmaFAuaH4 I would not send my pencils to this guy!!! He's obviously a hack and not a Certified Pencil Sharpening Artisan (CPSA) or even a Certified Pencil Sharpening Specialist(CPSS)!! His ratio of core to barrel is way off and the angle of the point way too steep. And the amount of graphite he left on the tip would give a low shaft gripper (LSG) black fingers. Maybe getting cut rate LASIK might be okay but DO NOT TRUST YOUR VALUABLE PENCILS WITH THIS FLAKE!!! Have you used Forrest's pencil sharpening service? They've got a great reputation for saw blades, does the same hold true for pencils? I'd have to buy a few extra pencils, but for a quality sharpening, it'd be worth it. Puckdropper -- Make it to fit, don't make it fit. |
#56
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On 7/22/2014 11:48 PM, GeneT wrote:
On Wednesday, June 25, 2014 11:13:18 AM UTC-10, Spalted Walt wrote: Shot on location at The Woodwright's School, Pittsboro NC http://www.youtube.com/embed/VkSmaFAuaH4 I would not send my pencils to this guy!!! He's obviously a hack and not a Certified Pencil Sharpening Artisan He has a series on the National Geographic Channel. Subjects covered a How to make ice How to tie a shoelace How to dig a hole and more |
#57
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On 22 Jul 2014 20:11:42 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote: Bill wrote in : I would have liked to have seen that. Did he do it with an element of humor or fear? With my shop teachers, it was often hard to tell whether they were being funny or not (like when pointing to the picture taped to the drill press of a kid with half of the hair on his head missing). I never realized how dangerous a drill press could be until I started reading machinist forums. If the bit grabs, the workpiece can come around and hit you faster than your reflexes can take corrective action. It doesn't seem to be as big of problem with wood, as the wood doesn't provide as good of hold as metal or plastic. However, I've had a few times where the bit has grabbed and spun a small workpiece around. I also had one time where it grabbed and pulled the piece around and whacked the column. Better it than me. Puckdropper Brass. I learned how treacherous drilling it can be. Fortunately my little drill press vice missed me as it went flying into the wall A standard bit will grab and either it and your holding devise will go for a spin or your drill bit will break. The trick I found was to stone the cutting edge to increase the cutting angle. It doesn't take much. |
#58
Posted to rec.woodworking
|
|||
|
|||
How to sharpen a pencil
On Wednesday, July 23, 2014 1:13:16 AM UTC-10, Ed Pawlowski wrote:
On 7/22/2014 11:48 PM, GeneT wrote: On Wednesday, June 25, 2014 11:13:18 AM UTC-10, Spalted Walt wrote: Shot on location at The Woodwright's School, Pittsboro NC http://www.youtube.com/embed/VkSmaFAuaH4 I would not send my pencils to this guy!!! He's obviously a hack and not a Certified Pencil Sharpening Artisan He has a series on the National Geographic Channel. Subjects covered a How to make ice How to tie a shoelace How to dig a hole and more Oh, so he's a jack of all trades and master of none!! |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sharpen a knife with a cup | Home Repair | |||
sharpen a pencil sharpener? | Metalworking | |||
Sharpen a knife with a cup | Home Repair | |||
Can you sharpen as good as this guy? | Woodworking | |||
How to sharpen Gouge | Woodturning |