Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? Thanks |
#2
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
wrote in message ... I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? Thanks I will be there soon, Hopefully. ;~) I would think that you would want them perhaps slightly more closely spaced than the distance that the vise opens. |
#3
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Fri, 6 Nov 2009 22:39:01 -0600, "Leon"
wrote: I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? I would think that you would want them perhaps slightly more closely spaced than the distance that the vise opens. That thought did occur to me for the vise, but what about dog holes for the rest of the bench? There's no vise there to allow for adjustment. I'm considering one or more of these from Lee Valley to allow for universality. http://www.leevalley.com/wood/page.a...25&cat=51&ap=1 |
#4
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Fri, 06 Nov 2009 23:00:49 -0500, wrote:
I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? Anywhere but into the mounting bracket of the vise -Kevin |
#5
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Sat, 07 Nov 2009 00:58:43 -0500, Kevin
wrote: I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? Anywhere but into the mounting bracket of the vise But, if I did, I could use it as a sawdust collector. |
#6
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
Leon wrote:
wrote in message ... I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? Thanks I will be there soon, Hopefully. ;~) I would think that you would want them perhaps slightly more closely spaced than the distance that the vise opens. The vise should have one or more retractable dogs. You want the dog holes aligned with those, and spaced to something less than the total movement of the vise. |
#7
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Sat, 7 Nov 2009 01:52:08 -0500, "J. Clarke"
The vise should have one or more retractable dogs. You want the dog holes aligned with those, and spaced to something less than the total movement of the vise. It's an older Record vise on the order of 20 years I'd guess. No retractable dog on it. I'll have to jury rig something for it. |
#8
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
wrote:
I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? The WoodSmithShop just built a bench. They ran then on 6" centers. YMMV Lew |
#9
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On 11/07/2009 01:12 AM, wrote:
On Sat, 7 Nov 2009 01:52:08 -0500, "J. Clarke" The vise should have one or more retractable dogs. You want the dog holes aligned with those, and spaced to something less than the total movement of the vise. It's an older Record vise on the order of 20 years I'd guess. No retractable dog on it. I'll have to jury rig something for it. Put a wooden chop on the movable jaw and put a dog hole in it. Something like the one shown he http://blog.woodworking-magazine.com...Workbench.aspx Chris |
#10
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Fri, 6 Nov 2009 23:23:29 -0800, "Lew Hodgett"
wrote: They ran then on 6" centers. Thanks, I read about the workbench earlier here, but didn't know about the 6" centres. I had a look through their website and couldn't find a link to that particular episode. You got a link to it by any chance Lew? |
#11
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Sat, 07 Nov 2009 01:40:08 -0600, Chris Friesen
wrote: Put a wooden chop on the movable jaw and put a dog hole in it. Something like the one shown he Not sure what you mean by "chop", but wooden jaws with one or two dog holes would be entirely feasible. Thanks. Some of these bench pups by Lee Valley would work nicely. http://www.leevalley.com/wood/page.a...=1,41637,41645 |
#12
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
wrote in message ... On Fri, 6 Nov 2009 22:39:01 -0600, "Leon" wrote: I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? I would think that you would want them perhaps slightly more closely spaced than the distance that the vise opens. That thought did occur to me for the vise, but what about dog holes for the rest of the bench? There's no vise there to allow for adjustment. I'm considering one or more of these from Lee Valley to allow for universality. http://www.leevalley.com/wood/page.a...25&cat=51&ap=1 According to the web site drawing that particular clamp has a 9-3/4" threaded rod and 8-3/8 that is not threaded. I 'd probably go with 9" |
#13
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"J. Clarke" wrote in message ... Leon wrote: wrote in message ... I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? Thanks I will be there soon, Hopefully. ;~) I would think that you would want them perhaps slightly more closely spaced than the distance that the vise opens. The vise should have one or more retractable dogs. You want the dog holes aligned with those, and spaced to something less than the total movement of the vise. Is that what I said ;~) |
#14
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Lew Hodgett" wrote in message ... wrote: I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? The WoodSmithShop just built a bench. They ran then on 6" centers. YMMV Are you talking about the one with 2x fir legs and a MDF top? That is the one I am thinking of building. Cheap! |
#15
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Leon" wrote in message ... According to the web site drawing that particular clamp has a 9-3/4" threaded rod and 8-3/8 that is not threaded. I 'd probably go with 9" CORRECTION I'd probably go with 8". |
#16
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
wrote in message ... On Fri, 6 Nov 2009 23:23:29 -0800, "Lew Hodgett" wrote: They ran then on 6" centers. Thanks, I read about the workbench earlier here, but didn't know about the 6" centres. I had a look through their website and couldn't find a link to that particular episode. You got a link to it by any chance Lew? I have a Sketchup drawing of the concept if you want. I could convert it to pdf if you needed that but you would not get the whole experience of seeing it from all angles. I am probably going to build one very much like it but not quite so long or wide. Mine is scaled down a bit. |
#17
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
wrote: Thanks, I read about the workbench earlier here, but didn't know about the 6" centres. I had a look through their website and couldn't find a link to that particular episode. You got a link to it by any chance Lew? Not really, if web site doesn't list programs, you are probably out of luck. Lew |
#18
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Leon" wrote: Are you talking about the one with 2x fir legs and a MDF top? That is the one I am thinking of building. Cheap! Yep. Lew |
#19
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Sat, 7 Nov 2009 07:51:31 -0600, "Leon"
wrote: I'm considering one or more of these from Lee Valley to allow for universality. http://www.leevalley.com/wood/page.a...25&cat=51&ap=1 According to the web site drawing that particular clamp has a 9-3/4" threaded rod and 8-3/8 that is not threaded. I 'd probably go with 9" I'll base my hole spacing on a diagonal measuring scheme and drill the dog holes little less than the maximum adjustability of those clamps. That will give me the most universality. It also makes sense that I should actually buy one first and physically view it's maximum capabilities than just going on the product's physical description ~ despite Veritas' reputation for excellence. |
#20
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Sat, 7 Nov 2009 08:01:39 -0600, "Leon"
wrote: I have a Sketchup drawing of the concept if you want. I could convert it to pdf if you needed that but you would not get the whole experience of seeing it from all angles. Sure, I'd appreciate a copy of your Sketchup design if you're going to make on. You have my email address. Thanks |
#22
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Sat, 7 Nov 2009 07:54:20 -0600, the infamous "Leon"
scrawled the following: "Lew Hodgett" wrote in message .. . wrote: I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? The WoodSmithShop just built a bench. They ran then on 6" centers. YMMV Are you talking about the one with 2x fir legs and a MDF top? That is the one I am thinking of building. Cheap! Good luck running with dogs in a termite barf top, Leon. -- "To compel a man to subsidize with his taxes the propagation of ideas which he disbelieves and abhors is sinful and tyrannical." -- Thomas Jefferson |
#23
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Sat, 07 Nov 2009 11:05:31 -0800, Larry Jaques
wrote: A tubafore tee (underneath on a car jack) prevents blowouts. That's an idea that hadn't occurred to me. I was wondering how I'll drill interior holes where even my largest clamps would reach to position wood against blowout. http://www.leevalley.com/wood/page.a...25&cat=51&ap=1 Whatver for? (Sorry, Rob, but that thing's overpriced.) Get the Wonder Pups if anything. (now cost twice what I paid for 'em!) At approximate $35 each ca, they're only half the cost of the surface vises and certainly not as much reach. I also like that fact that you fasten your own block attachment to the end of the surface vices, something you can't do with the wonder dogs. I guess combination of both would fill most anyone's needs. |
#24
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
wrote in message news On Sat, 07 Nov 2009 11:05:31 -0800, Larry Jaques wrote: A tubafore tee (underneath on a car jack) prevents blowouts. That's an idea that hadn't occurred to me. I was wondering how I'll drill interior holes where even my largest clamps would reach to position wood against blowout. http://www.leevalley.com/wood/page.a...25&cat=51&ap=1 Whatver for? (Sorry, Rob, but that thing's overpriced.) Get the Wonder Pups if anything. (now cost twice what I paid for 'em!) At approximate $35 each ca, they're only half the cost of the surface vises and certainly not as much reach. I also like that fact that you fasten your own block attachment to the end of the surface vices, something you can't do with the wonder dogs. I guess combination of both would fill most anyone's needs. When I see something like this, I wonder how people can live without a spool welder. They're cheap and you can use flux-cored wire to hold down cost if only used occasionally. I did woodworking, but occasionally I'd trot out the welder and make a fixture or work piece, while also having it handy to repair my normal homeowner's equipment like tractor, attachments and mower. While the Lee Valley surface gizmo looks great and would probably be handy for some jobs, I found that when something was specifically needed, I could fabricate what I needed faster and cheaper (not necessarily better, though) than what I could buy. Once used, it'd get put into a corner, on a shelf or in a closet until needed the next time. For the very occasional use, such as I'd have for the Lee Valley clamp/vice, a large nut, piece of threaded rod and a piece of smooth rod for the dog hole would be perfect. Vice Grips make a great crank handle. grin -- Nonny You cannot make a stupid kid smart by handing him a diploma. Schools need standards to measure the amount of education actually absorbed by children. Don't sacrifice the smart kids to make the dumb ones feel good about themselves. |
#25
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Lew Hodgett" wrote in message ... wrote: Thanks, I read about the workbench earlier here, but didn't know about the 6" centres. I had a look through their website and couldn't find a link to that particular episode. You got a link to it by any chance Lew? Not really, if web site doesn't list programs, you are probably out of luck. Lew I too didn't find the episode Lew aluded to. However.. I figured out how to set up my (Comcast provided) DVR to record Woodsmith every time it is shown. I didn't even have to know which days it is on. I entered "W-O-O" and selected it from a list. Now, maybe THAT appliance can start earning it's keep. The first epison I watched, "sliding cabinets", illustrated a few interesting techniques.. The show seems to move at a pace which keeps it interesting, and, since it was on a PBS channel, was not broken up with commercials. In retrospect, maybe I'm the only one here who hasn't seen the show before...so many channels, good stuff gets lost in the commercial clutter. Bill |
#26
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Bill" wrote in message ... "Lew Hodgett" wrote in message ... I too didn't find the episode Lew aluded to. However.. I figured out how to set up my (Comcast provided) DVR to record Woodsmith every time it is shown. I didn't even have to know which days it is on. I entered "W-O-O" and selected it from a list. Now, maybe THAT appliance can start earning it's keep. The first epison I watched, "sliding cabinets", illustrated a few interesting techniques.. The show seems to move at a pace which keeps it interesting, and, since it was on a PBS channel, was not broken up with commercials. In retrospect, maybe I'm the only one here who hasn't seen the show before...so many channels, good stuff gets lost in the commercial clutter. Bill Dang Bill welcome to the last century. LOL. I have had a DVR since 2003 and with DirecTV I connect to the internet also with a Cat 6 cable to my router. I can down load instantly all of the shows if they are available. IIRC it comes on or came on HGTV. |
#27
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Larry Jaques" wrote in message ... On Sat, 7 Nov 2009 07:54:20 -0600, the infamous "Leon" scrawled the following: Are you talking about the one with 2x fir legs and a MDF top? That is the one I am thinking of building. Cheap! Good luck running with dogs in a termite barf top, Leon. thanks~ ;!) We'll see how they work out. If they don't work I am only out $30-$40. I really simply need more storage and more horizontal surface. |
#28
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
The first row should be close to the holes on the vise jaw so that you can
clamp small short pieces. Lon Schleining recommends in his book spacing dog holes between 5" to 8". If you don't have a quick change vise you may want to move toward closer end of spacing to eliminate time spent cranking vise out to width and back. To reduce racking of vice, at least on wider boards, two rows of holes off the vise can be used. If you have the money, IMHO, its well worth investing in either Schleining or Schwarz book on workbench design and construction. A lot of good ideas there and considerations you may not think about.. May be available at the local library.. Good luck.. wrote in message ... I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? Thanks |
#29
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Leon" wrote in message ... Dang Bill welcome to the last century. LOL. I have had a DVR since 2003 and with DirecTV I connect to the internet also with a Cat 6 cable to my router. I can down load instantly all of the shows if they are available. IIRC it comes on or came on HGTV. Leon, I have an outlet in the wall going to a splitter- cable_modem- router- Network Interface (in computer) for Internet. I also have my tv-card in my computer attached to the other half of the splitter. Do you know if there a way for me to download a whole show "instantly", like you do, with this configuration? What you describe reminds me of FTP. Maybe what you are able to do can be credited to the (TV) software application you are using? I am using an open-source application ("D-scalar") to provide an interface to my legacy tv-card. BTW, I've collected 2 books on SketchUp: "Google SketchUp" and "Google SketchUp Cookbook" since you helped get me up and running with that. Bill |
#30
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Bill" wrote in message ... Leon, I have an outlet in the wall going to a splitter- cable_modem- router- Network Interface (in computer) for Internet. I also have my tv-card in my computer attached to the other half of the splitter. Do you know if there a way for me to download a whole show "instantly", like you do, with this configuration? What you describe reminds me of FTP. Maybe. I am not a guru in this matter. I just recently was able to hook up the DVR to the internet. It is a softare function of the DVR AND it is not "instantly". It is a little slower than making a copy from a stand alone DVD player to a stand alone DVD recorder. Basically it takes about 2.5 hours to record a 2 hour movie. An advantage is that if it is available you can immediately down load it and begin watching after the progress bar turns green from red for an uninterrupted view. Now with that said there are many many internet sources available for free that may have the TV show that you are looking for. Most of the major broad cast station web sites allow you to down load their shows to your computer. Also HULU.com is a site for free movies that you can download. BTW, I've collected 2 books on SketchUp: "Google SketchUp" and "Google SketchUp Cookbook" since you helped get me up and running with that. I'll look into those. I have only purchased Sketchup for Dummies and it is a pretty good book but/and deals with the pro version. It is a good reference book. I knew most of what is in it. Yesterday I found a tutorial that shows how to animate components through svenes and layers. Basically you start an animation and it goes through the scenes one by one and shows a drawer opening and closing. It is cool but I am not at all sure it would be of any value unless you were trying to sell the project to a customer and you were not around to demo it yourself. He would have open the fial with Sketchup or Sketchup Viewer and play the animation himself. |
#31
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
In article ,
wrote: I'm about to drill bench dog holes in a slab maple bench 30" x 72". I intend to place my 12" Record vise adjacent to the left front corner. I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? On a related note, make _sure_ you use the right shape holes. There are well-known problems that arise from trying to put a square dog in a round hole. GRIN |
#32
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Tue, 10 Nov 2009 08:41:01 +0000 (GMT), Stuart
wrote: http://www.ptreeusa.com/ttrack_list.htm I'd have an awful tough time forcing myself to cut a long dado in my beautiful slab maple work bench. It will be tough enough as it is to drill dog holes and you want me to cut dado tracks??? Maybe down the road when it's full of nicks and cuts and isn't so pristine. |
#33
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On 11/10/2009 02:41 AM, Stuart wrote:
In article , wrote: I'm wondering if anyone has determined optimum placement for dog holes ~ how many and where? Wherever you put, them they'll be right some of the time and wrong some of the time -| One way is to get some aluminium "T" slot and set it into the top of the bench, then you can put the "dogs" where you like when you need them I'd be worried about damaging the T-track given the amount of force occasionally exerted with my handplanes when hogging off large amounts of wood. Chris |
#34
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
On Tue, 10 Nov 2009 09:58:15 -0600, Chris Friesen
wrote: I'd be worried about damaging the T-track given the amount of force occasionally exerted with my handplanes when hogging off large amounts of wood. Not to worry. While I appreciate the T-Track suggestion, there's no way I'm going to be putting them in. I'll do fine with bench dogs (when I get them installed). |
#35
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
"Stuart" wrote I recently finished a new bench with a nice (laminated) beech top. Within a few days I was routing out a piece of MDF and managed to put a .05mm grove in the top of it. I was really cut up about it. I am convinced I set and rechecked the depth stop on the router but it happened somehow. Yep, something similar happened to me. I managed to score a good deal on a store sample maple workbench. I was routing a bunch of signs in Lexan with a dremel mounted in a baby router case. It was simple. Put the sign on paper under the lexan and "draw" the letters and symbols with the baby router. I don't know what happened but I did one sign and the lettering went through the material. I looked on the bench and the letters and symbols are permanantly etched into the benchtop. Luckily, I caught it before I had done much on that sign. I got all upset about it and agonized over a cosmetic repair. Then I realized it was a bench top. I guess it is like that first scratch on a new car. I now have many nicks, etc on the benchtop. The rest of the bench looks pretty, but the top is starting to look ugly. If it gets too bad, I can always resurface it. But it works just fine the way it is now. |
#36
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
wrote in news:3t0jf5h19dfkj1g61h21m65ucjpgjs3ktd@
4ax.com: On Tue, 10 Nov 2009 08:41:01 +0000 (GMT), Stuart wrote: http://www.ptreeusa.com/ttrack_list.htm I'd have an awful tough time forcing myself to cut a long dado in my beautiful slab maple work bench. It will be tough enough as it is to drill dog holes and you want me to cut dado tracks??? Maybe down the road when it's full of nicks and cuts and isn't so pristine. That's the exact reason I used plywood when I built my CMS stand. Part of it is used as a bench top, and there's no regrets when I screw in to it, bang on it, route things on it and make grooves and holes and the like. When it gets bad enough, I'll just cut another piece and replace it. I only wish it was deeper so I could fit some T-track on it. Guess I'll have to cut another piece to back it. Puckdropper -- signature.txt not found. Please enter signature manually. |
#37
Posted to rec.woodworking
|
|||
|
|||
Optimum Bench Dog Holes Placement?
wrote in message ... On Tue, 10 Nov 2009 08:41:01 +0000 (GMT), Stuart wrote: http://www.ptreeusa.com/ttrack_list.htm I'd have an awful tough time forcing myself to cut a long dado in my beautiful slab maple work bench. It will be tough enough as it is to drill dog holes and you want me to cut dado tracks??? I wouldn't do it anyway. You will constantly be retrieving small items that fall into the tracks and trying to clean the sawdust out. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
best way to drill holes into bench stretcher? | Woodworking | |||
Brace drilling bench bolt holes | Woodworking | |||
dog holes on the side of the bench? | Woodworking | |||
Square bench dog holes - worth doing the ledge? | Woodworking | |||
Bench dog holes: Drill through? | Woodworking |