Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#81
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Sun, 18 Feb 2018 11:06:17 -0500, "Jim Wilkins"
wrote: "Larry Jaques" wrote in message .. . ... Yes, being a blue-collar worker from day 1, I have felt the scorn of so called "professional" people. (people of color aren't the only people who are discriminated against.) https://www.cnn.com/2017/08/03/opini...ein/index.html Really? Corrupt News Network links? Wow, how did that article get by CNN "editors"? It casts aspersions on Lefties! It tells truths! Postmodernist cultural Marxists will disavow it. It's a gem. Thank you, Mark Bauerlein. MAGA P.S: I read an article (no cite) describing Ashkenazi Jews as having the highest average IQs, followed by Asians, and Whites. Speaking of jealous scorn, do you think those groups have felt it? Me, too. Just found this, which parallels the other article: http://aristocratsofthesoul.com/aver...and-ethnicity/ -- However beautiful the strategy, you should occasionally look at the results. -- Sir Winston Churchill |
#82
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Sun, 18 Feb 2018 19:45:48 -0800, Larry Jaques
wrote: On Sun, 18 Feb 2018 10:22:56 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message . .. On Sat, 17 Feb 2018 15:02:39 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message m... I noticed some other things as I was winding down the business. Most of my clients had been totally helpless with DIY/mech/elec. devices and probably 80%+ had been KoolAid-drinkin', CNN-watchin' Dems. I had to keep a real tight rein on my lips. Coincidentally I was discussing that last night with a female professional photographer, while otherwise drinking beer and making animal sounds with the guys around a bonfire out in the woods. LOL Her current art project is documenting tradesmen to show them as normal humans to an audience of lawyers, stockbrokers et al who look down on manual skills (that they lack). Yes, being a blue-collar worker from day 1, I have felt the scorn of so called "professional" people. (people of color aren't the only people who are discriminated against.) I'm heartened to hear that she is doing that project, and I hope it goes viral. The envious scorn goes both ways, I get it for being a college graduate. I don't know about envy, but I can imagine that it is even more widespread nowadays, with what colleges are turning out. Video: parents attended 8% of job interviews and 3% of parents actually participated in the interview. Aren't Millennials interesting? https://www.youtube.com/watch?v=dwG5...ex=457&list=WL In the past, more scorn went out to overeducated folks who had a dozen post-nominal letters after their name, but who couldn't tie their own shoes. (I think Rodney Dangerfield picked up his respect schtick from some of them.) That said, too many people can't handle someone around them knowing more than they do, and that's a shame. I settled the argument with one tradesman by telling him that a degree may not prove superior intelligence but it does demonstrate the persistence to complete a long, tedious and boring task. That it does, plus, there are many types of intelligence. Obtaining a science or engineering degree is so far beyond normal experience that it isn't a good example to compare to. =Extreme= STEM. My mother worked at the NH State Library where a degree in -anything- was required for promotion above her level. Lots of companies now require some degree in whatever to even accept your resume/CV. I got my degree from the school of hard knocks. ANd like Marty Raney " you want my resume' ? -" and he shows his work-worn hands - - - |
#83
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
"Clare Snyder" wrote in message
news .. I got my degree from the school of hard knocks. That, in the form of the US Army, is where I began my automotive and electronic training. Further education in them plus all machining were OJT. -jsw |
#84
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Mon, 19 Feb 2018 00:31:42 -0500, Clare Snyder
wrote: On Sun, 18 Feb 2018 19:45:48 -0800, Larry Jaques wrote: On Sun, 18 Feb 2018 10:22:56 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message ... On Sat, 17 Feb 2018 15:02:39 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message om... I noticed some other things as I was winding down the business. Most of my clients had been totally helpless with DIY/mech/elec. devices and probably 80%+ had been KoolAid-drinkin', CNN-watchin' Dems. I had to keep a real tight rein on my lips. Coincidentally I was discussing that last night with a female professional photographer, while otherwise drinking beer and making animal sounds with the guys around a bonfire out in the woods. LOL Her current art project is documenting tradesmen to show them as normal humans to an audience of lawyers, stockbrokers et al who look down on manual skills (that they lack). Yes, being a blue-collar worker from day 1, I have felt the scorn of so called "professional" people. (people of color aren't the only people who are discriminated against.) I'm heartened to hear that she is doing that project, and I hope it goes viral. The envious scorn goes both ways, I get it for being a college graduate. I don't know about envy, but I can imagine that it is even more widespread nowadays, with what colleges are turning out. Video: parents attended 8% of job interviews and 3% of parents actually participated in the interview. Aren't Millennials interesting? https://www.youtube.com/watch?v=dwG5...ex=457&list=WL In the past, more scorn went out to overeducated folks who had a dozen post-nominal letters after their name, but who couldn't tie their own shoes. (I think Rodney Dangerfield picked up his respect schtick from some of them.) That said, too many people can't handle someone around them knowing more than they do, and that's a shame. I settled the argument with one tradesman by telling him that a degree may not prove superior intelligence but it does demonstrate the persistence to complete a long, tedious and boring task. That it does, plus, there are many types of intelligence. Obtaining a science or engineering degree is so far beyond normal experience that it isn't a good example to compare to. =Extreme= STEM. My mother worked at the NH State Library where a degree in -anything- was required for promotion above her level. Lots of companies now require some degree in whatever to even accept your resume/CV. I got my degree from the school of hard knocks. ANd like Marty Raney " you want my resume' ? -" and he shows his work-worn hands - - - +1 for that. -- However beautiful the strategy, you should occasionally look at the results. -- Sir Winston Churchill |
#85
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Mon, 19 Feb 2018 16:19:39 -0800, Larry Jaques
wrote: On Mon, 19 Feb 2018 00:31:42 -0500, Clare Snyder wrote: On Sun, 18 Feb 2018 19:45:48 -0800, Larry Jaques wrote: On Sun, 18 Feb 2018 10:22:56 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message ... On Sat, 17 Feb 2018 15:02:39 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message om... I noticed some other things as I was winding down the business. Most of my clients had been totally helpless with DIY/mech/elec. devices and probably 80%+ had been KoolAid-drinkin', CNN-watchin' Dems. I had to keep a real tight rein on my lips. Coincidentally I was discussing that last night with a female professional photographer, while otherwise drinking beer and making animal sounds with the guys around a bonfire out in the woods. LOL Her current art project is documenting tradesmen to show them as normal humans to an audience of lawyers, stockbrokers et al who look down on manual skills (that they lack). Yes, being a blue-collar worker from day 1, I have felt the scorn of so called "professional" people. (people of color aren't the only people who are discriminated against.) I'm heartened to hear that she is doing that project, and I hope it goes viral. The envious scorn goes both ways, I get it for being a college graduate. I don't know about envy, but I can imagine that it is even more widespread nowadays, with what colleges are turning out. Video: parents attended 8% of job interviews and 3% of parents actually participated in the interview. Aren't Millennials interesting? https://www.youtube.com/watch?v=dwG5...ex=457&list=WL In the past, more scorn went out to overeducated folks who had a dozen post-nominal letters after their name, but who couldn't tie their own shoes. (I think Rodney Dangerfield picked up his respect schtick from some of them.) That said, too many people can't handle someone around them knowing more than they do, and that's a shame. I settled the argument with one tradesman by telling him that a degree may not prove superior intelligence but it does demonstrate the persistence to complete a long, tedious and boring task. That it does, plus, there are many types of intelligence. Obtaining a science or engineering degree is so far beyond normal experience that it isn't a good example to compare to. =Extreme= STEM. My mother worked at the NH State Library where a degree in -anything- was required for promotion above her level. Lots of companies now require some degree in whatever to even accept your resume/CV. I got my degree from the school of hard knocks. ANd like Marty Raney " you want my resume' ? -" and he shows his work-worn hands - - - +1 for that. Ed Huntress got his **** in a dress from the school of crusty ****s. His daddy was the Dean. |
#86
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Mon, 19 Feb 2018 16:19:39 -0800, Larry Jaques
wrote: On Mon, 19 Feb 2018 00:31:42 -0500, Clare Snyder wrote: On Sun, 18 Feb 2018 19:45:48 -0800, Larry Jaques wrote: On Sun, 18 Feb 2018 10:22:56 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message m... On Sat, 17 Feb 2018 15:02:39 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message news:9rpg8dtbjtv8saarml6egl218198un73nh@4ax. com... I noticed some other things as I was winding down the business. Most of my clients had been totally helpless with DIY/mech/elec. devices and probably 80%+ had been KoolAid-drinkin', CNN-watchin' Dems. I had to keep a real tight rein on my lips. Coincidentally I was discussing that last night with a female professional photographer, while otherwise drinking beer and making animal sounds with the guys around a bonfire out in the woods. LOL Her current art project is documenting tradesmen to show them as normal humans to an audience of lawyers, stockbrokers et al who look down on manual skills (that they lack). Yes, being a blue-collar worker from day 1, I have felt the scorn of so called "professional" people. (people of color aren't the only people who are discriminated against.) I'm heartened to hear that she is doing that project, and I hope it goes viral. The envious scorn goes both ways, I get it for being a college graduate. I don't know about envy, but I can imagine that it is even more widespread nowadays, with what colleges are turning out. Video: parents attended 8% of job interviews and 3% of parents actually participated in the interview. Aren't Millennials interesting? https://www.youtube.com/watch?v=dwG5...ex=457&list=WL In the past, more scorn went out to overeducated folks who had a dozen post-nominal letters after their name, but who couldn't tie their own shoes. (I think Rodney Dangerfield picked up his respect schtick from some of them.) That said, too many people can't handle someone around them knowing more than they do, and that's a shame. I settled the argument with one tradesman by telling him that a degree may not prove superior intelligence but it does demonstrate the persistence to complete a long, tedious and boring task. That it does, plus, there are many types of intelligence. Obtaining a science or engineering degree is so far beyond normal experience that it isn't a good example to compare to. =Extreme= STEM. My mother worked at the NH State Library where a degree in -anything- was required for promotion above her level. Lots of companies now require some degree in whatever to even accept your resume/CV. I got my degree from the school of hard knocks. ANd like Marty Raney " you want my resume' ? -" and he shows his work-worn hands - - - +1 for that. My "rawhide wrench" has turned ito "fine kid leather" over the years since I stopped wrenching full-time, but one look at my hands and it's obvious they've worked for a living sometime in their life - - -. A closer look finds a few fingertips wider than the rest, as well as scar tissue on knuckles, as well as a few good scars from cuts - and more recently the displacement of joints due to arthritis - - - |
#87
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
"Clare Snyder" wrote in message
... On Mon, 19 Feb 2018 16:19:39 -0800, Larry Jaques wrote: On Mon, 19 Feb 2018 00:31:42 -0500, Clare Snyder wrote: On Sun, 18 Feb 2018 19:45:48 -0800, Larry Jaques wrote: On Sun, 18 Feb 2018 10:22:56 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message om... On Sat, 17 Feb 2018 15:02:39 -0500, "Jim Wilkins" wrote: "Larry Jaques" wrote in message news:9rpg8dtbjtv8saarml6egl218198un73nh@4ax .com... I noticed some other things as I was winding down the business. Most of my clients had been totally helpless with DIY/mech/elec. devices and probably 80%+ had been KoolAid-drinkin', CNN-watchin' Dems. I had to keep a real tight rein on my lips. Coincidentally I was discussing that last night with a female professional photographer, while otherwise drinking beer and making animal sounds with the guys around a bonfire out in the woods. LOL Her current art project is documenting tradesmen to show them as normal humans to an audience of lawyers, stockbrokers et al who look down on manual skills (that they lack). Yes, being a blue-collar worker from day 1, I have felt the scorn of so called "professional" people. (people of color aren't the only people who are discriminated against.) I'm heartened to hear that she is doing that project, and I hope it goes viral. The envious scorn goes both ways, I get it for being a college graduate. I don't know about envy, but I can imagine that it is even more widespread nowadays, with what colleges are turning out. Video: parents attended 8% of job interviews and 3% of parents actually participated in the interview. Aren't Millennials interesting? https://www.youtube.com/watch?v=dwG5...ex=457&list=WL In the past, more scorn went out to overeducated folks who had a dozen post-nominal letters after their name, but who couldn't tie their own shoes. (I think Rodney Dangerfield picked up his respect schtick from some of them.) That said, too many people can't handle someone around them knowing more than they do, and that's a shame. I settled the argument with one tradesman by telling him that a degree may not prove superior intelligence but it does demonstrate the persistence to complete a long, tedious and boring task. That it does, plus, there are many types of intelligence. Obtaining a science or engineering degree is so far beyond normal experience that it isn't a good example to compare to. =Extreme= STEM. My mother worked at the NH State Library where a degree in -anything- was required for promotion above her level. Lots of companies now require some degree in whatever to even accept your resume/CV. I got my degree from the school of hard knocks. ANd like Marty Raney " you want my resume' ? -" and he shows his work-worn hands - - - +1 for that. My "rawhide wrench" has turned ito "fine kid leather" over the years since I stopped wrenching full-time, but one look at my hands and it's obvious they've worked for a living sometime in their life - - -. A closer look finds a few fingertips wider than the rest, as well as scar tissue on knuckles, as well as a few good scars from cuts - and more recently the displacement of joints due to arthritis - - - We were discussing hard-working hands over Thanksgiving dinner, after my sister became annoyed that the men were handling bowls she had warned us were hot. Are you also ambidextrous and able to pick up a bowl of oven-hot food? -jsw |
#88
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Mon, 19 Feb 2018 22:00:19 -0500, Clare Snyder
wrote: On Mon, 19 Feb 2018 16:19:39 -0800, Larry Jaques wrote: On Mon, 19 Feb 2018 00:31:42 -0500, Clare Snyder wrote: I got my degree from the school of hard knocks. ANd like Marty Raney " you want my resume' ? -" and he shows his work-worn hands - - - +1 for that. My "rawhide wrench" has turned ito "fine kid leather" over the years since I stopped wrenching full-time, but one look at my hands and it's obvious they've worked for a living sometime in their life - - -. A closer look finds a few fingertips wider than the rest, as well as scar tissue on knuckles, as well as a few good scars from cuts - and more recently the displacement of joints due to arthritis - - - Those scars are called Crapsman Love Taps. '79-80 is when I lost my pound of flesh and gallon of blood to the new Chiwanese steel, before they re-sourced once again. Grr. -- However beautiful the strategy, you should occasionally look at the results. -- Sir Winston Churchill |
#89
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Mon, 19 Feb 2018 22:34:20 -0500, "Jim Wilkins"
wrote: "Clare Snyder" wrote in message .. . My "rawhide wrench" has turned ito "fine kid leather" over the years since I stopped wrenching full-time, but one look at my hands and it's obvious they've worked for a living sometime in their life - - -. A closer look finds a few fingertips wider than the rest, as well as scar tissue on knuckles, as well as a few good scars from cuts - and more recently the displacement of joints due to arthritis - - - We were discussing hard-working hands over Thanksgiving dinner, after my sister became annoyed that the men were handling bowls she had warned us were hot. Are you also ambidextrous and able to pick up a bowl of oven-hot food? I'm definitely ambidextrous, but no longer oven-safe. I've lost a lot of callus over the past year+, since retiring. -- However beautiful the strategy, you should occasionally look at the results. -- Sir Winston Churchill |
#90
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Mon, 19 Feb 2018 20:28:27 -0800, Larry Jaques
wrote: On Mon, 19 Feb 2018 22:00:19 -0500, Clare Snyder wrote: On Mon, 19 Feb 2018 16:19:39 -0800, Larry Jaques wrote: On Mon, 19 Feb 2018 00:31:42 -0500, Clare Snyder wrote: I got my degree from the school of hard knocks. ANd like Marty Raney " you want my resume' ? -" and he shows his work-worn hands - - - +1 for that. My "rawhide wrench" has turned ito "fine kid leather" over the years since I stopped wrenching full-time, but one look at my hands and it's obvious they've worked for a living sometime in their life - - -. A closer look finds a few fingertips wider than the rest, as well as scar tissue on knuckles, as well as a few good scars from cuts - and more recently the displacement of joints due to arthritis - - - Those scars are called Crapsman Love Taps. '79-80 is when I lost my pound of flesh and gallon of blood to the new Chiwanese steel, before they re-sourced once again. Grr. I can still see the scars across the back of the fingers on my left hand courtesy of a dull jack-knife when I was 13. The scars from the coping saw on my knuckle from when I was 12 is almost totally gone - at 65. My right ring finger is about 25% wider than the left one at the tip courtesy of my Snap-on air hammer 30 years ago and still reminds me on my stupidity when it gets cold. Most of the other miscalaneous divots and gouges pretty well fade into the back-ground. It's only been a few years now that my right wrist doesn't remind me on a regular basis about being shattered for the second time by the gearshift of an old Chevy pickup back when I was 17 (I put it in reverse - bad gear kicked the lever back and re-broke the wrist Ihad broken a year and a half earlier. Between the 2 breaks it made my apprenticeship as a mechanic something of a painfull process - and driving the floor shift Mini and Power-Wagon tow truck interesting - - - . |
#91
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Tue, 20 Feb 2018 00:46:22 -0500, Clare Snyder
wrote: On Mon, 19 Feb 2018 20:28:27 -0800, Larry Jaques wrote: On Mon, 19 Feb 2018 22:00:19 -0500, Clare Snyder wrote: On Mon, 19 Feb 2018 16:19:39 -0800, Larry Jaques wrote: On Mon, 19 Feb 2018 00:31:42 -0500, Clare Snyder wrote: I got my degree from the school of hard knocks. ANd like Marty Raney " you want my resume' ? -" and he shows his work-worn hands - - - +1 for that. My "rawhide wrench" has turned ito "fine kid leather" over the years since I stopped wrenching full-time, but one look at my hands and it's obvious they've worked for a living sometime in their life - - -. A closer look finds a few fingertips wider than the rest, as well as scar tissue on knuckles, as well as a few good scars from cuts - and more recently the displacement of joints due to arthritis - - - Those scars are called Crapsman Love Taps. '79-80 is when I lost my pound of flesh and gallon of blood to the new Chiwanese steel, before they re-sourced once again. Grr. I can still see the scars across the back of the fingers on my left hand courtesy of a dull jack-knife when I was 13. Just before my 1st birthday, my 13-month-older sister was ironing my hand with Mom's iron. At some point, I fell asleep and she plugged it in. Mom has a picture of the scab covering the back my right hand with me reaching for an Alaskan crab. The scab and crab are the same orangey black color. That scar is entirely gone now. The scars from the coping saw on my knuckle from when I was 12 is almost totally gone - at 65. My right ring finger is about 25% wider than the left one at the tip courtesy of my Snap-on air hammer 30 years ago and still reminds me on my stupidity when it gets cold. Most of the other miscalaneous divots and gouges pretty well fade into the back-ground. Ditto mine. It's only been a few years now that my right wrist doesn't remind me on a regular basis about being shattered for the second time by the gearshift of an old Chevy pickup back when I was 17 (I put it in reverse - bad gear kicked the lever back and re-broke the wrist Ihad broken a year and a half earlier. Oh, ouch. And the agony of rebreaking the same bone must have hurt, too. Between the 2 breaks it made my apprenticeship as a mechanic something of a painfull process - and driving the floor shift Mini and Power-Wagon tow truck interesting - - - . Dad took me shooting at the Base range one time and an acquaintance had his .30-06 that day. I was ten and the guy asked if I wanted to shoot it. Of course, I did, and he told me to hold it a little bit away from my shoulder. Dad didn't correct him and it knocked me on my ass. OMG, it hurt so much I cried in front of them, and I couldn't use that arm for over a week. Years later, a doctor taking x-rays asked if I'd broken my collar bone in the past, as it didn't look quite right. I never did forgive either of those SOBs for it, and it's still "not quite right". AFAIK, I've never broken a bone (knock on wood) and hope I never do. I've had two cracked bones (12th rib and outer metatarsal, neither visible on x-ray) -- However beautiful the strategy, you should occasionally look at the results. -- Sir Winston Churchill |
#92
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Tue, 20 Feb 2018 06:09:59 -0800, Larry Jaques
wrote: AFAIK, I've never broken a bone (knock on wood) and hope I never do. I've had two cracked bones (12th rib and outer metatarsal, neither visible on x-ray) 2 or three broken toes , broken wrist, and 2 crushed fingers. The wide one was bone meal, the one beside it was in 3 or 4 pieces from the last joint to the tip. Thankfully both joints still work, and surprisingly they are NOT the ones curling from arthritis. The first time I broke the wrist I didn't know it was broken (small bone, - I think it was the capitate?) but it hurt like hell. When I broke it again they x-rayed and said it was previously broken - which means I didn't get workman's compensation for the "work related" injury because the first break was not work related - - - |
#93
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Tue, 20 Feb 2018 09:33:06 -0500, Clare Snyder
wrote: On Tue, 20 Feb 2018 06:09:59 -0800, Larry Jaques wrote: AFAIK, I've never broken a bone (knock on wood) and hope I never do. I've had two cracked bones (12th rib and outer metatarsal, neither visible on x-ray) 2 or three broken toes , broken wrist, and 2 crushed fingers. The wide one was bone meal, the one beside it was in 3 or 4 pieces from the last joint to the tip. Thankfully both joints still work, and surprisingly they are NOT the ones curling from arthritis. I've diced my thumb tip halfway off once with a gristly piece of meat and a nice, freshly-sharpened knife. Didn't even feel it until my thumb shifted on its own. Rinsed in fast water/soap, put in some triple antibiotic cream, butterflied it down, and bandaged it up. It was as good as new in 2 weeks, with not much pain, except when it hit something. The first time I broke the wrist I didn't know it was broken (small bone, - I think it was the capitate?) but it hurt like hell. When I broke it again they x-rayed and said it was previously broken - which means I didn't get workman's compensation for the "work related" injury because the first break was not work related - - - Suckage. -- However beautiful the strategy, you should occasionally look at the results. -- Sir Winston Churchill |
#94
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Thu, 15 Feb 2018 09:04:08 +0800, Perry wrote:
On 14-Feb-18 10:39 PM, Christopher Tidy wrote: Am Mittwoch, 14. Februar 2018 14:33:53 UTC+1 schrieb Red Prepper: I'm sure Ed ****dress, the **** In A Dress will be along shortly to tell you everything he knows about lubricating oils and gels. If your good, he'll even let you try them out together. Honestly, what happened to this group? Ed is a good guy. What happened to this group? From what I can recall many years back Gunner Asch used to cross post all sorts of crap to survivalist groups effectively inviting a bunch of nutbags into what WAS a really good productive NG. You have always been a nutcase. Im not around much anymore..yet you keep spewing and spewing and spewing.... --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#95
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Sun, 25 Feb 2018 17:12:57 -0800, Gunner Asch
wrote: On Thu, 15 Feb 2018 09:04:08 +0800, Perry wrote: On 14-Feb-18 10:39 PM, Christopher Tidy wrote: Am Mittwoch, 14. Februar 2018 14:33:53 UTC+1 schrieb Red Prepper: I'm sure Ed ****dress, the **** In A Dress will be along shortly to tell you everything he knows about lubricating oils and gels. If your good, he'll even let you try them out together. Honestly, what happened to this group? Ed is a good guy. What happened to this group? From what I can recall many years back Gunner Asch used to cross post all sorts of crap to survivalist groups effectively inviting a bunch of nutbags into what WAS a really good productive NG. You have always been a nutcase. Im not around much anymore..yet you keep spewing and spewing and spewing.... The cross-posting from survivalist groups started with you, and has never stopped since. You know it, they know it, and everyone else on RCM knows it. -- Ed Huntress |
#96
Posted to rec.crafts.metalworking
|
|||
|
|||
How to tell "Cutting Oil" from "Lubricating Oil"
On Mon, 26 Feb 2018 16:55:21 -0500, Ed Huntress
wrote: On Sun, 25 Feb 2018 17:12:57 -0800, Gunner Asch wrote: On Thu, 15 Feb 2018 09:04:08 +0800, Perry wrote: On 14-Feb-18 10:39 PM, Christopher Tidy wrote: Am Mittwoch, 14. Februar 2018 14:33:53 UTC+1 schrieb Red Prepper: I'm sure Ed ****dress, the **** In A Dress will be along shortly to tell you everything he knows about lubricating oils and gels. If your good, he'll even let you try them out together. Honestly, what happened to this group? Ed is a good guy. What happened to this group? From what I can recall many years back Gunner Asch used to cross post all sorts of crap to survivalist groups effectively inviting a bunch of nutbags into what WAS a really good productive NG. You have always been a nutcase. Im not around much anymore..yet you keep spewing and spewing and spewing.... The cross-posting from survivalist groups started with you, and has never stopped since. You know it, they know it, and everyone else on RCM knows it. -- Ed ****dress Interesting. Gunner provides lots of on topic information. All you provide is a foul stench and comic relief as you sashay through the newsgroups in your silly old **** dresses. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How can I tell a wood-cutting bandsaw blade from a metal cutting one? | Home Repair | |||
Marvel Lubricating Oil | Home Repair | |||
laminate floor - lubricating oil ? | UK diy | |||
Lubricating Oil | UK diy | |||
Lubricating oil for high-speed spindles | Metalworking |