Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#41
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 05:45:02 +0100, Simon Mason wrote:
On Sunday, 9 October 2016 22:06:01 UTC+1, James Wilkinson Sword wrote: On Sun, 09 Oct 2016 21:00:25 +0100, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. Soft water in Scotland too. The south has terrible water. It's more E/W. http://www.combimate.co.uk/images/up...rdwaterMap.jpg NW/SE. -- I got the strangest recording when I called the phone company the other day. It said, "You have been connected to the correct department on the first try. This is against company policy. Please hang up and redial." |
#42
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/2016 15:47, James Wilkinson Sword wrote:
On Mon, 10 Oct 2016 09:12:15 +0100, Bod wrote: On 09/10/2016 22:10, Mr Pounder Esquire wrote: Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! I live in the superior north. I've worked in the ******** of the south, looked into the kettles in hotels and have been disgusted with what I saw in them. BBC NEWS | Health | Hard water 'stops heart attacks' news.bbc.co.uk/2/hi/health/3396141.stm Regular sex and red wine also do. 'The top 50 local areas with the highest male life expectancy at birth were in the South East, East of England, South West, London and East Midlands' Life Expectancy at Birth and at Age 65 by Local Areas in England and ... http://www.ons.gov.uk/ons/rel/.../li...e-2012-14.html |
#43
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote:
On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. |
#44
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Monday, 10 October 2016 09:17:46 UTC+1, Bod wrote:
On 10/10/2016 05:45, Simon Mason wrote: On Sunday, 9 October 2016 22:06:01 UTC+1, James Wilkinson Sword wrote: On Sun, 09 Oct 2016 21:00:25 +0100, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. Soft water in Scotland too. The south has terrible water. It's more E/W. http://www.combimate.co.uk/images/up...rdwaterMap.jpg Indeed, there are several areas in the north east that have hard water. And Eastern Wales. |
#45
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 16:12:56 +0100, Bod wrote:
On 10/10/2016 15:47, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 09:12:15 +0100, Bod wrote: On 09/10/2016 22:10, Mr Pounder Esquire wrote: Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! I live in the superior north. I've worked in the ******** of the south, looked into the kettles in hotels and have been disgusted with what I saw in them. BBC NEWS | Health | Hard water 'stops heart attacks' news.bbc.co.uk/2/hi/health/3396141.stm Regular sex and red wine also do. 'The top 50 local areas with the highest male life expectancy at birth were in the South East, East of England, South West, London and East Midlands' Life Expectancy at Birth and at Age 65 by Local Areas in England and .... http://www.ons.gov.uk/ons/rel/.../li...e-2012-14.html That's because people are more well off. -- Giraffiti (n): Vandalism spray-painted very, very high. |
#46
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote:
On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. -- Giraffiti (n): Vandalism spray-painted very, very high. |
#47
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/2016 16:42, James Wilkinson Sword wrote:
On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. |
#48
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote:
On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? -- In 1272, the Arabic Muslims invented the condom, using a goat's lower intestine. In 1873, the British refined the idea by taking the intestine out of the goat first. |
#49
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 10:59:44 +0100, GB wrote:
On 10/10/2016 02:06, James Wilkinson Sword wrote: Some people worry about nothing. Funny how I keep seeing 100 year old women in the news that drink and smoke. Smokers have a 50% chance of dying from it. But most of those would probably have died shortly afterwards anyway. -- FOR SALE BY OWNER. Complete set of Encyclopedia Britannica , 45 volumes. Excellent condition, £200 or best offer. No longer needed, got married, wife knows everything. |
#50
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/2016 16:58, James Wilkinson Sword wrote:
On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. |
#51
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
In article ,
Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. They tend to look neater, too. However, they are not as easy to undo as a compression fitting - but there again, you might never want to. -- from KT24 in Surrey, England |
#52
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/2016 17:18, charles wrote:
In article , Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. They tend to look neater, too. However, they are not as easy to undo as a compression fitting - but there again, you might never want to. Yes, much neater. |
#53
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/16 17:07, Bod wrote:
On 10/10/2016 16:58, James Wilkinson Sword wrote: Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. I'm not a great plumber, but around 10 seconds to solder a joint, a little more to flux it and steel wool it first. Say 30 second. That's not what takes the time. It's deciding where the pipe is to go, cutting it and bending it and holding it there. Which is the same fr compression. The real time saver is flexible plastic pipe . That is FAST. -- "Corbyn talks about equality, justice, opportunity, health care, peace, community, compassion, investment, security, housing...." "What kind of person is not interested in those things?" "Jeremy Corbyn?" |
#54
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 17:07:03 +0100, Bod wrote:
On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong.. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. Compression fittings take virtually no time at all, and don't require equipment and heat and so forth to use. Some people just like to do things "the tradition correct way" without thinking. -- In the 60's people took acid to make the world weird. Now the world is weird, people take prozac to make it normal. |
#55
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 17:18:29 +0100, charles wrote:
In article , Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. They tend to look neater, too. However, they are not as easy to undo as a compression fitting - but there again, you might never want to. More likely the plumber doesn't give a **** about future modifications. I've found it very handy to be able to remove one and change what goes into it. -- My wife was standing nude, looking in the bedroom mirror. She was not happy with what she saw and said to me, "I feel horrible. I look old, fat and ugly. I really need you to pay me a compliment." I replied, "Your eyesight's damn near perfect." And then the fight started....... |
#56
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 17:24:11 +0100, Bod wrote:
On 10/10/2016 17:18, charles wrote: In article , Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. They tend to look neater, too. However, they are not as easy to undo as a compression fitting - but there again, you might never want to. Yes, much neater. They're not normally visible anyway. -- Einstein married his cousin, Elsa Lowenthal, after his first marriage failed in 1919. At the time he stated that he was attracted to Elsa "because she was so well endowed". He postulated that if you are attracted to women with large breasts, the attraction is even stronger if there is a DNA connection. This came to be known as.... Einstein's Theory of "Relative Titty." |
#57
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 17:24:50 +0100, The Natural Philosopher wrote:
On 10/10/16 17:07, Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. I'm not a great plumber, but around 10 seconds to solder a joint, a little more to flux it and steel wool it first. Say 30 second. That's not what takes the time. It's deciding where the pipe is to go, cutting it and bending it and holding it there. Which is the same fr compression. For soldering you have to hold it there a lot longer than just tightening a screw thread. The real time saver is flexible plastic pipe . That is FAST. Indeed, that stuff is great. -- Einstein married his cousin, Elsa Lowenthal, after his first marriage failed in 1919. At the time he stated that he was attracted to Elsa "because she was so well endowed". He postulated that if you are attracted to women with large breasts, the attraction is even stronger if there is a DNA connection. This came to be known as.... Einstein's Theory of "Relative Titty." |
#58
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 09:20:18 +0100, Bod wrote:
On 10/10/2016 06:35, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Sun, 09 Oct 2016 23:56:43 +0100, Rod Speed wrote: James Wilkinson Sword wrote -- Got myself a new Jack Russell puppy, he's mainly black and brown with a small white patch, so I've named him England. Hilarious watching all those black, brown and yellow people that Britain ****ed over for centurys all getting their revenge now back in that soggy little frigid island, ****ing you lot over. We keep letting them in, There in no alternative. The NHS alone wouldn't survive without them. we're fighting a war and we don't even realise it. There is no war, just more of the immigration that has always happened in that soggy little frigid island for millennia. The vast majority of Australians are descended from immigrants. But most of them white. -- The world's largest fruit are giant pumpkins. The world record is 1061lbs (481.3 kg). |
#59
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 06:35:58 +0100, Rod Speed wrote:
"James Wilkinson Sword" wrote in message news On Sun, 09 Oct 2016 23:56:43 +0100, Rod Speed wrote: James Wilkinson Sword wrote -- Got myself a new Jack Russell puppy, he's mainly black and brown with a small white patch, so I've named him England. Hilarious watching all those black, brown and yellow people that Britain ****ed over for centurys all getting their revenge now back in that soggy little frigid island, ****ing you lot over. We keep letting them in, There in no alternative. The NHS alone wouldn't survive without them. WTF are you talking about? we're fighting a war and we don't even realise it. There is no war, just more of the immigration that has always happened in that soggy little frigid island for millennia. A small amount doesn't matter, but the amount that's happening now is an invasion. -- The world's largest fruit are giant pumpkins. The world record is 1061lbs (481.3 kg). |
#60
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/16 17:18, charles wrote:
In article , Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. They tend to look neater, too. However, they are not as easy to undo as a compression fitting - but there again, you might never want to. simply pout a pipe cutter in and remove the section. OR heat em up and knock em apart you cant reuse a compression joint anyway. You need to cut the pipe and use a new olive. -- No Apple devices were knowingly used in the preparation of this post. |
#61
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
Tim+ wrote:
In fact, you can see it on the PDF of the tap you posted. Part B3. Yes, I had noticed that. But upon peering in, it looks like it's missing! |
#62
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
Chris J Dixon wrote:
After my kitchen mixer has been in place about 7 years, both hot and cold began to drip. I opened them up, more in hope than expectation, but I found scale deposits on the ceramic disc, which were quite easily removed, and all was well. OTOH the other day I decided to descale the filter on the washing machine. Darned thing started leaking afterwards... after a few days it did stop, though. |
#63
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 16:12:56 +0100, Bod wrote: On 10/10/2016 15:47, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 09:12:15 +0100, Bod wrote: On 09/10/2016 22:10, Mr Pounder Esquire wrote: Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! I live in the superior north. I've worked in the ******** of the south, looked into the kettles in hotels and have been disgusted with what I saw in them. BBC NEWS | Health | Hard water 'stops heart attacks' news.bbc.co.uk/2/hi/health/3396141.stm Regular sex and red wine also do. 'The top 50 local areas with the highest male life expectancy at birth were in the South East, East of England, South West, London and East Midlands' Life Expectancy at Birth and at Age 65 by Local Areas in England and ... http://www.ons.gov.uk/ons/rel/.../li...e-2012-14.html That's because people are more well off. Nope, its primarily due to the **** you lot eat. Nothing to do with the water. |
#64
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? Less time than when using a compression fitting when you know what you are doing. |
#65
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 17:07:03 +0100, Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. Compression fittings take virtually no time at all, Same with soldered fittings. and don't require equipment and heat and so forth to use. Irrelevant to a plumber. Some people just like to do things "the tradition correct way" without thinking. And any plumber with even half a clue knows that the time to do the joint is only a tiny part of the total time to do the job and is the same for a plumber with soldered joints and compression fittings, with soldered ones much cheaper and arent going to ever need to be replaced when done by someone who knows what they are doing. Compression fittings are for clowns like you that don't have a ****ing clue. |
#66
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 17:24:50 +0100, The Natural Philosopher wrote: On 10/10/16 17:07, Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. I'm not a great plumber, but around 10 seconds to solder a joint, a little more to flux it and steel wool it first. Say 30 second. That's not what takes the time. It's deciding where the pipe is to go, cutting it and bending it and holding it there. Which is the same fr compression. For soldering you have to hold it there a lot longer than just tightening a screw thread. Even sillier and more pig ignorant than you usually manage. The real time saver is flexible plastic pipe . That is FAST. Indeed, that stuff is great. |
#67
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 06:35:58 +0100, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Sun, 09 Oct 2016 23:56:43 +0100, Rod Speed wrote: James Wilkinson Sword wrote -- Got myself a new Jack Russell puppy, he's mainly black and brown with a small white patch, so I've named him England. Hilarious watching all those black, brown and yellow people that Britain ****ed over for centurys all getting their revenge now back in that soggy little frigid island, ****ing you lot over. We keep letting them in, There in no alternative. The NHS alone wouldn't survive without them. WTF are you talking about? The fact that there are so many immigrants working for the NHS that without them the entire operation wouldn't work at all. we're fighting a war and we don't even realise it. There is no war, just more of the immigration that has always happened in that soggy little frigid island for millennia. A small amount doesn't matter, but the amount that's happening now is an invasion. You lot said that about all of the Angles, Saxons, Jutes, Romans, Vikings, Normans, Huguenots, Jews, Wogs, Dagos, Blacks, Browns, Yellows, etc etc etc. Your ancestors were immigrants, wog boy. |
#68
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 17:55:29 +0100, The Natural Philosopher wrote:
On 10/10/16 17:18, charles wrote: In article , Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. They tend to look neater, too. However, they are not as easy to undo as a compression fitting - but there again, you might never want to. simply pout a pipe cutter in and remove the section. OR heat em up and knock em apart you cant reuse a compression joint anyway. You need to cut the pipe and use a new olive. You can reuse it, just not the olive. -- Religion is excellent stuff for keeping common people quiet -- Napoleon Bonaparte |
#69
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 18:45:16 +0100, Rod Speed wrote:
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 16:12:56 +0100, Bod wrote: On 10/10/2016 15:47, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 09:12:15 +0100, Bod wrote: On 09/10/2016 22:10, Mr Pounder Esquire wrote: Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! I live in the superior north. I've worked in the ******** of the south, looked into the kettles in hotels and have been disgusted with what I saw in them. BBC NEWS | Health | Hard water 'stops heart attacks' news.bbc.co.uk/2/hi/health/3396141.stm Regular sex and red wine also do. 'The top 50 local areas with the highest male life expectancy at birth were in the South East, East of England, South West, London and East Midlands' Life Expectancy at Birth and at Age 65 by Local Areas in England and ... http://www.ons.gov.uk/ons/rel/.../li...e-2012-14.html That's because people are more well off. Nope, its primarily due to the **** you lot eat. Nothing to do with the water. Poorer people eat lower quality food. -- You've heard of "Virgin Wool from New Zealand?" It's a myth. |
#70
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 18:51:25 +0100, Rod Speed wrote:
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? Less time than when using a compression fitting when you know what you are doing. Bull****. Both involve cutting the pipe to the right length. After that you just screw the thing on. -- What does a Polish woman do after she sucks a cock? Spits out the feathers. |
#71
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On Mon, 10 Oct 2016 18:57:40 +0100, Rod Speed wrote:
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 17:07:03 +0100, Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. Compression fittings take virtually no time at all, Same with soldered fittings. and don't require equipment and heat and so forth to use. Irrelevant to a plumber. Some people just like to do things "the tradition correct way" without thinking. And any plumber with even half a clue knows that the time to do the joint is only a tiny part of the total time to do the job and is the same for a plumber with soldered joints and compression fittings, with soldered ones much cheaper and arent going to ever need to be replaced when done by someone who knows what they are doing. Plumbers who have learnt how to do them want to make use of the pointless skill. Compression fittings are for clowns like you that don't have a ****ing clue. They last forever too. -- Six stages of married life: 1: Tri-weekly 2: Try weekly 3: Try weakly 4. Try oysters 5: Try anything 6: Try to remember |
#72
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/2016 19:22, James Wilkinson Sword wrote:
On Mon, 10 Oct 2016 18:51:25 +0100, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? Less time than when using a compression fitting when you know what you are doing. Bull****. Both involve cutting the pipe to the right length. After that you just screw the thing on. Peter, you don't know what you are talking about. |
#73
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
Fevric J. Glandules wrote:
Tim+ wrote: In fact, you can see it on the PDF of the tap you posted. Part B3. Yes, I had noticed that. But upon peering in, it looks like it's missing! Well it'll almost certainly be a hex socket head so it won't look like much. Have you tried an Allen key down the hole? Tim -- Please don't feed the trolls |
#74
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 18:45:16 +0100, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 16:12:56 +0100, Bod wrote: On 10/10/2016 15:47, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 09:12:15 +0100, Bod wrote: On 09/10/2016 22:10, Mr Pounder Esquire wrote: Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! I live in the superior north. I've worked in the ******** of the south, looked into the kettles in hotels and have been disgusted with what I saw in them. BBC NEWS | Health | Hard water 'stops heart attacks' news.bbc.co.uk/2/hi/health/3396141.stm Regular sex and red wine also do. 'The top 50 local areas with the highest male life expectancy at birth were in the South East, East of England, South West, London and East Midlands' Life Expectancy at Birth and at Age 65 by Local Areas in England and ... http://www.ons.gov.uk/ons/rel/.../li...e-2012-14.html That's because people are more well off. Nope, its primarily due to the **** you lot eat. Nothing to do with the water. Poorer people eat lower quality food. The dregs are too stupid to eat sensibly. |
#75
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 18:51:25 +0100, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? Less time than when using a compression fitting when you know what you are doing. Bull****. Fact. Both involve cutting the pipe to the right length. After that you just screw the thing on. Which takes longer than soldering it when you know what you are doing. The soldered joint requires no support either. |
#76
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 18:57:40 +0100, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 17:07:03 +0100, Bod wrote: On 10/10/2016 16:58, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:44:30 +0100, Bod wrote: On 10/10/2016 16:42, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 16:37:38 +0100, harry wrote: On Monday, 10 October 2016 15:47:11 UTC+1, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 05:43:18 +0100, Simon Mason wrote: On Sunday, 9 October 2016 21:58:23 UTC+1, Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! -- 100% Cu. 99% Cu, 1% CuO probably. With lead solder. Most plumbers use compression fittings, much quicker. No they don't. Compression fittings are far more expensive and less reliable. Funny my house is ful of them and not one has failed in the 16 years I've been here. As for expense, how much of your time is taken to solder a joint? You are very obviously not a plumber. I *know* 100% that you are wrong. I used to use *end feed* fittings which are about a tenth of the price of compression joints. Soldering a joint doesn't take much more time to solder than using compression fittings. At least to a plumber it doesn't. Compression fittings take virtually no time at all, Same with soldered fittings. and don't require equipment and heat and so forth to use. Irrelevant to a plumber. Some people just like to do things "the tradition correct way" without thinking. And any plumber with even half a clue knows that the time to do the joint is only a tiny part of the total time to do the job and is the same for a plumber with soldered joints and compression fittings, with soldered ones much cheaper and arent going to ever need to be replaced when done by someone who knows what they are doing. Plumbers who have learnt how to do them want to make use of the pointless skill. They do what is cheapest and is the best technology. Compression fittings are for clowns like you that don't have a ****ing clue. They last forever too. Thanks for that completely superfluous proof that you have never had a ****ing clue. |
#77
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/2016 19:53, Rod Speed wrote:
"James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 18:45:16 +0100, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Mon, 10 Oct 2016 16:12:56 +0100, Bod wrote: On 10/10/2016 15:47, James Wilkinson Sword wrote: On Mon, 10 Oct 2016 09:12:15 +0100, Bod wrote: On 09/10/2016 22:10, Mr Pounder Esquire wrote: Roger Mills wrote: On 09/10/2016 21:00, Mr Pounder Esquire wrote: Simon Mason wrote: On Sunday, 9 October 2016 14:53:44 UTC+1, Fevric J. Glandules wrote: Hi, we live in a very hard water area and the kitchen tap is now "grinding" whenever used. It's one of these [1] https://www.howdens.com/kitchen-coll...gle-level-tap/ Got a water softener last week for £1500 - that's a thing of the past for me now. Looked into the kettle today, clean as a whistle. What a ******** you must live in. If your water is that soft, let's hope that you haven't got any lead pipes! I live in the superior north. I've worked in the ******** of the south, looked into the kettles in hotels and have been disgusted with what I saw in them. BBC NEWS | Health | Hard water 'stops heart attacks' news.bbc.co.uk/2/hi/health/3396141.stm Regular sex and red wine also do. 'The top 50 local areas with the highest male life expectancy at birth were in the South East, East of England, South West, London and East Midlands' Life Expectancy at Birth and at Age 65 by Local Areas in England and ... http://www.ons.gov.uk/ons/rel/.../li...e-2012-14.html That's because people are more well off. Nope, its primarily due to the **** you lot eat. Nothing to do with the water. Poorer people eat lower quality food. The dregs are too stupid to eat sensibly. If you shop sensibly, anybody can eat well on limited money. |
#78
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
"Bod" wrote in message ... On 10/10/2016 06:35, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Sun, 09 Oct 2016 23:56:43 +0100, Rod Speed wrote: James Wilkinson Sword wrote -- Got myself a new Jack Russell puppy, he's mainly black and brown with a small white patch, so I've named him England. Hilarious watching all those black, brown and yellow people that Britain ****ed over for centurys all getting their revenge now back in that soggy little frigid island, ****ing you lot over. We keep letting them in, There in no alternative. The NHS alone wouldn't survive without them. we're fighting a war and we don't even realise it. There is no war, just more of the immigration that has always happened in that soggy little frigid island for millennia. The vast majority of Australians are descended from immigrants. The vast majority of everyone are descended from immigrants. |
#79
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/2016 19:59, Rod Speed wrote:
"Bod" wrote in message ... On 10/10/2016 06:35, Rod Speed wrote: "James Wilkinson Sword" wrote in message news On Sun, 09 Oct 2016 23:56:43 +0100, Rod Speed wrote: James Wilkinson Sword wrote -- Got myself a new Jack Russell puppy, he's mainly black and brown with a small white patch, so I've named him England. Hilarious watching all those black, brown and yellow people that Britain ****ed over for centurys all getting their revenge now back in that soggy little frigid island, ****ing you lot over. We keep letting them in, There in no alternative. The NHS alone wouldn't survive without them. we're fighting a war and we don't even realise it. There is no war, just more of the immigration that has always happened in that soggy little frigid island for millennia. The vast majority of Australians are descended from immigrants. The vast majority of everyone are descended from immigrants. Agreed. |
#80
Posted to uk.d-i-y
|
|||
|
|||
Fix / de-scale kitchen tap
On 10/10/2016 09:50, The Natural Philosopher wrote:
That's how bad the mental impairment is ;-) Surely, that's how bad the metal impairment is ;-) -- Rod |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
scale inhibitors | UK diy | |||
Scale of scale | UK diy | |||
Scale | Metalworking | |||
The Definitive Chord & Scale Bible - Literally EVERY chord and scale! | Metalworking | |||
Scale Inhibitors | UK diy |