Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
Found this guy's setup while aimlessly wandering the net, thought some
might find it of interest. http://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&It emid=53 Jon --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Jon Anderson" wrote in message Found this guy's setup while aimlessly wandering the net, thought some might find it of interest. http://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&It emid=53 Jon Interesting. Thanks for posting, eih! |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sat, 3 Jun 2017 08:53:08 +1000, Jon Anderson
wrote: Found this guy's setup while aimlessly wandering the net, thought some might find it of interest. http://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&It emid=53 Jon, I'm still getting a Server Not Found error after 2 days. Oh, well. -- I started out with nothing and I still have most of it left! --anon |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Saturday, June 3, 2017 at 12:53:51 PM UTC-4, Larry Jaques wrote:
On Sat, 3 Jun 2017 08:53:08 +1000, Jon Anderson wrote: Found this guy's setup while aimlessly wandering the net, thought some might find it of interest. http://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&It emid=53 Jon, I'm still getting a Server Not Found error after 2 days. Oh, well. -- I started out with nothing and I still have most of it left! --anon It works for me. Try cutting and pasting it to Notebook or whatever and see if your Usenet program is leaving a space after the question mark. -- Ed Huntress |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
Or try just: www.eccentricengineering.com.au , they both work for me.
-- Regards, Carl Ijames wrote in message ... On Saturday, June 3, 2017 at 12:53:51 PM UTC-4, Larry Jaques wrote: On Sat, 3 Jun 2017 08:53:08 +1000, Jon Anderson wrote: Found this guy's setup while aimlessly wandering the net, thought some might find it of interest. http://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&It emid=53 Jon, I'm still getting a Server Not Found error after 2 days. Oh, well. -- I started out with nothing and I still have most of it left! --anon It works for me. Try cutting and pasting it to Notebook or whatever and see if your Usenet program is leaving a space after the question mark. -- Ed Huntress |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 2017-06-03, Carl Ijames wrote:
http://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&It emid=53 Or try just: www.eccentricengineering.com.au , they both work for me. That one then requires clicking on the "Acute Sharpening System" bar to the left of the main page. But both work for me, if I let the browser translate the "=53" at the end of the first URL posted -- which happens to translate into a 'S'. It looks intersting, but I can't seem to find prices anywhere. (And, it won't handle some of the end mills which I use -- up to 1" shanks. :-( Enjoy, DoN. -- Remove oil spill source from e-mail Email: | (KV4PH) Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"DoN. Nichols" wrote in message
... On 2017-06-03, Carl Ijames wrote: http://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&It emid=53 Or try just: www.eccentricengineering.com.au , they both work for me. That one then requires clicking on the "Acute Sharpening System" bar to the left of the main page. But both work for me, if I let the browser translate the "=53" at the end of the first URL posted -- which happens to translate into a 'S'. It looks intersting, but I can't seem to find prices anywhere. (And, it won't handle some of the end mills which I use -- up to 1" shanks. :-( Enjoy, DoN. ================================================== === I assumed that once someone was at the home page they would see the button labeled "acute sharpening system" and know what to do with it. Since his problem was that he couldn't get there I thought a simpler URL would be more help than trying to diagnose possible failures in the long one. Anyway, on the home page there's another button labeled "shop", click that and then click the link to the acute sharpening system and you will see the prices for the plans, parts kit, and completed units. -- Regards, Carl Ijames |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 2017-06-04, Carl Ijames wrote:
"DoN. Nichols" wrote in message ... [ ... ] It looks intersting, but I can't seem to find prices anywhere. (And, it won't handle some of the end mills which I use -- up to 1" shanks. :-( Enjoy, DoN. ================================================= ==== I assumed that once someone was at the home page they would see the button labeled "acute sharpening system" and know what to do with it. You never know. :-) Since his problem was that he couldn't get there I thought a simpler URL would be more help than trying to diagnose possible failures in the long one. Anyway, on the home page there's another button labeled "shop", click that and then click the link to the acute sharpening system and you will see the prices for the plans, parts kit, and completed units. I went to the "Shop" section, and did not see the prices. Perhaps it needs Javascript enabled. I keep it disabled most of the time. I probably won't go back, since it will not handle my larger end mills. A larger scale version might be worth my while. Enjoy, DoN. -- Remove oil spill source from e-mail Email: | (KV4PH) Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames"
wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox can’t find the server at www.eccentricengineering.com.au. -- Believe nothing. No matter where you read it, Or who said it, Even if I have said it, Unless it agrees with your own reason And your own common sense. -- Buddha |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 6/3/2017 8:52 PM, Larry Jaques wrote:
On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames" wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox cant find the server at www.eccentricengineering.com.au. -- Believe nothing. No matter where you read it, Or who said it, Even if I have said it, Unless it agrees with your own reason And your own common sense. -- Buddha Try again. It works. - 6/3/17 9:14 CST Martin |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Larry Jaques" wrote in message
... On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames" wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox can't find the server at www.eccentricengineering.com.au. Works for me, using the current WinXP version of Firefox. However I have a surface grinder with fixtures to sharpen lathe threading bits and milling cutters. I made a holder like their Diamond Tool Holder to cut thrust bearing races with the shank of a broken carbide drill bit. It's an old design for turret lathe forming bits that don't lose their shape when resharpened. -jsw |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 2017-06-04, Larry Jaques wrote:
On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames" wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox can’t find the server at www.eccentricengineering.com.au. My firefox (V 31.0 on Solaris on UltraSPARC CPU) has no trouble, at least without the '.' you have on the end. Even with it present, still no problem reaching that site. Could it be a limit imposed by your ISP? On unix/linux systems, ping shows: ================================================== ==================== Katana:csu 17:44:27 # ping www.eccentricengineering.com.au. www.eccentricengineering.com.au. is alive ================================================== ==================== I forget what the Windows version of the ping command is called. There is also the equivalent to traceroute to try. Perhaps there is a problem with DNS lookup. It should produce 103.14.201.3 as the IP address. Substitute that for the domain name and try again. Good Luck, DoN. -- Remove oil spill source from e-mail Email: | (KV4PH) Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 4/06/2017 2:54 AM, Larry Jaques wrote:
Jon, I'm still getting a Server Not Found error after 2 days. Oh, well. Dunno what to say, URL works for me in Firefox and Chrome... Jon --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 4/06/2017 12:46 PM, Jim Wilkins wrote:
However I have a surface grinder with fixtures to sharpen lathe threading bits and milling cutters. I've come to accept that I'll never have a shop like I had in the States. Space is at a premium, good machines hard to find out in the country. Would love to have a surface grinder again, but not going to happen unless I win the lottery here. So interested in tools that offer biggest bang for smallest footprint. Jon --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sat, 3 Jun 2017 21:14:54 -0500, Martin E
wrote: On 6/3/2017 8:52 PM, Larry Jaques wrote: On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames" wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox can’t find the server at www.eccentricengineering.com.au. Try again. It works. - 6/3/17 9:14 CST Martin Same error 6/4/17 05:23 PST -- Believe nothing. No matter where you read it, Or who said it, Even if I have said it, Unless it agrees with your own reason And your own common sense. -- Buddha |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Larry Jaques" wrote in message
... On Sat, 3 Jun 2017 21:14:54 -0500, Martin E wrote: On 6/3/2017 8:52 PM, Larry Jaques wrote: On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames" wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox can't find the server at www.eccentricengineering.com.au. Try again. It works. - 6/3/17 9:14 CST Martin Same error 6/4/17 05:23 PST Replace keyboard actuator and hit any key. |
#17
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sun, 04 Jun 2017 05:24:31 -0700
Larry Jaques wrote: snip Same error 6/4/17 05:23 PST There is something weird about that site name and/or dns lookup... Try it through a proxy, like: http://anonymouse.org/cgi-bin/anon-w...36&It emid=53 or just go to anonymouse and use the form: http://anonymouse.org/anonwww.html Another option would be to try using Google translate and enter the address there. Have it translate English to English. Haven't tried that before but seems like it might work -- Leon Fisk Grand Rapids MI/Zone 5b Remove no.spam for email |
#18
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"DoN. Nichols" wrote in message
... On 2017-06-04, Carl Ijames wrote: "DoN. Nichols" wrote in message ... [ ... ] It looks intersting, but I can't seem to find prices anywhere. (And, it won't handle some of the end mills which I use -- up to 1" shanks. :-( Enjoy, DoN. ================================================= ==== I assumed that once someone was at the home page they would see the button labeled "acute sharpening system" and know what to do with it. You never know. :-) ================================== I knew when I was typing the word "assumed" that I was asking for trouble :-). ================================== Since his problem was that he couldn't get there I thought a simpler URL would be more help than trying to diagnose possible failures in the long one. Anyway, on the home page there's another button labeled "shop", click that and then click the link to the acute sharpening system and you will see the prices for the plans, parts kit, and completed units. I went to the "Shop" section, and did not see the prices. Perhaps it needs Javascript enabled. I keep it disabled most of the time. I probably won't go back, since it will not handle my larger end mills. A larger scale version might be worth my while. Enjoy, DoN. ================================================== ==== The drawings in a spiral bound notebook format are $35 and the parts kit is $250, both USD. Apparently he plans to include an instructional DVD that it isn't ready yet but will ship for just the shipping cost to anyone who buys plans or kit whenever it is done. Perhaps you could just substitute a 5C collet holder block for his 16 mm size? Or whatever size you need. He does have a demo video on youtube that should be reachable even if his site isn't: https://youtu.be/bzEQCvE1cIk -- Regards, Carl Ijames |
#19
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Leon Fisk" wrote in message
news On Sun, 04 Jun 2017 05:24:31 -0700 Larry Jaques wrote: snip Same error 6/4/17 05:23 PST There is something weird about that site name and/or dns lookup... Try it through a proxy, like: http://anonymouse.org/cgi-bin/anon-w...36&It emid=53 or just go to anonymouse and use the form: http://anonymouse.org/anonwww.html Another option would be to try using Google translate and enter the address there. Have it translate English to English. Haven't tried that before but seems like it might work -- Leon Fisk Beware of translations. Dancer and DWTS judge Carrie Ann Inaba has a tattoo in Japanese that was intended to mean Courageous Love but actually says Rough Sex. This is Carrie Ann, live on prime time TV: https://www.youtube.com/watch?v=SE7aF4pPDLY And she isn't the wildest judge. |
#20
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Carl Ijames" wrote in message news "DoN. Nichols" wrote in message ... On 2017-06-04, Carl Ijames wrote: "DoN. Nichols" wrote in message ... [ ... ] It looks intersting, but I can't seem to find prices anywhere. (And, it won't handle some of the end mills which I use -- up to 1" shanks. :-( Enjoy, DoN. ================================================ ===== I assumed that once someone was at the home page they would see the button labeled "acute sharpening system" and know what to do with it. You never know. :-) ================================== I knew when I was typing the word "assumed" that I was asking for trouble :-). ================================== Since his problem was that he couldn't get there I thought a simpler URL would be more help than trying to diagnose possible failures in the long one. Anyway, on the home page there's another button labeled "shop", click that and then click the link to the acute sharpening system and you will see the prices for the plans, parts kit, and completed units. I went to the "Shop" section, and did not see the prices. Perhaps it needs Javascript enabled. I keep it disabled most of the time. I probably won't go back, since it will not handle my larger end mills. A larger scale version might be worth my while. Enjoy, DoN. ================================================== ==== The drawings in a spiral bound notebook format are $35 and the parts kit is $250, both USD. Apparently he plans to include an instructional DVD that it isn't ready yet but will ship for just the shipping cost to anyone who buys plans or kit whenever it is done. Perhaps you could just substitute a 5C collet holder block for his 16 mm size? Or whatever size you need. He does have a demo video on youtube that should be reachable even if his site isn't: https://youtu.be/bzEQCvE1cIk -- Regards, Carl Ijames http://www.ebay.com/bhp/5c-square-collet |
#21
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sun, 4 Jun 2017 08:35:24 -0400, "Jim Wilkins"
wrote: "Larry Jaques" wrote in message .. . On Sat, 3 Jun 2017 21:14:54 -0500, Martin E wrote: On 6/3/2017 8:52 PM, Larry Jaques wrote: On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames" wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox can't find the server at www.eccentricengineering.com.au. Try again. It works. - 6/3/17 9:14 CST Martin Same error 6/4/17 05:23 PST Replace keyboard actuator and hit any key. Pffffft! We used to call that "Loose nut behind the wheel." in automotive repair shops when they brought the car in for a "funny noise" which we were unable to find or replicate. Anyway, I found a Youtube vid of their system and left a heads-up for them about my FF 53.0.3 32-bit malfunction with their website. I thought maybe it was a server overload the first day, but it persists through today. -- Believe nothing. No matter where you read it, Or who said it, Even if I have said it, Unless it agrees with your own reason And your own common sense. -- Buddha |
#22
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sun, 4 Jun 2017 09:12:55 -0400, Leon Fisk
wrote: On Sun, 04 Jun 2017 05:24:31 -0700 Larry Jaques wrote: snip Same error 6/4/17 05:23 PST There is something weird about that site name and/or dns lookup... Try it through a proxy, like: http://anonymouse.org/cgi-bin/anon-w...36&It emid=53 OK. That worked. Alas, no price list, etc., so my curiosity isn't fed. or just go to anonymouse and use the form: http://anonymouse.org/anonwww.html Bookmarked, thanks. Another option would be to try using Google translate and enter the address there. Have it translate English to English. Haven't tried that before but seems like it might work I don't find the server, so how would it...? -- Believe nothing. No matter where you read it, Or who said it, Even if I have said it, Unless it agrees with your own reason And your own common sense. -- Buddha |
#23
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sat, 03 Jun 2017 18:52:16 -0700, Larry Jaques
wrote: On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames" wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox can’t find the server at www.eccentricengineering.com.au. Pale Moon found it easily, as did Chrome and Firefox on my box. Odd yours doesnt. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#24
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sun, 04 Jun 2017 17:47:37 -0700, Gunner Asch
wrote: On Sat, 03 Jun 2017 18:52:16 -0700, Larry Jaques wrote: On Sat, 3 Jun 2017 13:40:04 -0400, "Carl Ijames" wrote: Or try just: www.eccentricengineering.com.au , they both work for me. Firefox can’t find the server at www.eccentricengineering.com.au. Pale Moon found it easily, as did Chrome and Firefox on my box. Odd yours doesnt. After seeing the site via Anonymouse, I'm sure I've seen it before via FF, so either Mozilla or EE broke something. I sure long for the stability of Netscape 4. It was TITS! -- Believe nothing. No matter where you read it, Or who said it, Even if I have said it, Unless it agrees with your own reason And your own common sense. -- Buddha |
#25
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Larry Jaques" wrote in message
... On Sun, 4 Jun 2017 09:12:55 -0400, Leon Fisk wrote: On Sun, 04 Jun 2017 05:24:31 -0700 Larry Jaques wrote: snip Same error 6/4/17 05:23 PST There is something weird about that site name and/or dns lookup... Try it through a proxy, like: http://anonymouse.org/cgi-bin/anon-w...36&It emid=53 OK. That worked. Alas, no price list, etc., so my curiosity isn't fed. I opened Firefox, Googled "eccentric engineering", clicked the link and then opened the Shop tab to reach the prices. My Firefox doesn't have any Add-ons. .Net is disabled and it lists Plug-ins for H264, Foxit Reader, VLC, Java, MS DRM, WPF and Media Player, and Shockwave. |
#26
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Sun, 04 Jun 2017 17:12:04 -0700
Larry Jaques wrote: snip Another option would be to try using Google translate and enter the address there. Have it translate English to English. Haven't tried that before but seems like it might work I don't find the server, so how would it...? Google translate does the dns lookup, acts like a proxy. It wouldn't let me do English to English though. But it will do Yiddish to English ;-) https://translate.google.com/transla...%26Itemid%3D53 Your ISP may have blocked that web site. Your DNS server and/or cache may not be up to date. You may have set up a hosts file entry for that site long ago. You may have a Firefox Addon blocking that site. You may have an Adblock utility blocking that site. You may have a cache problem within Firefox... Try this one to view some pricing. Be sitting down https://translate.google.com/transla...2%26Itemid%3D3 -- Leon Fisk Grand Rapids MI/Zone 5b Remove no.spam for email |
#27
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Leon Fisk" wrote in message
news On Sun, 04 Jun 2017 17:12:04 -0700 Larry Jaques wrote: snip Another option would be to try using Google translate and enter the address there. Have it translate English to English. Haven't tried that before but seems like it might work I don't find the server, so how would it...? Google translate does the dns lookup, acts like a proxy. It wouldn't let me do English to English though. But it will do Yiddish to English ;-) Will it translate Aussie to English? |
#28
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Mon, 5 Jun 2017 09:14:59 -0400
"Jim Wilkins" wrote: snip Will it translate Aussie to English? I know you're just having some fun, but here is the list it can supposedly translate from. I didn't see Aussie ;-) Afrikaans, Albanian, Amharic, Arabic, Armenian, Azerbaijani, Basque, Belarusian, Bengali, Bosnian, Bulgarian, Catalan, Cebuano, Chichewa, Chinese, Corsican, Croatian, Czech, Danish, Dutch, English, Esperanto, Estonian, Filipino, Finnish, French, Frisian, Galician, Georgian, German, Greek, Gujarati, Haitian Creole, Hausa, Hawaiian, Hebrew, Hindi, Hmong, Hungarian, Icelandic, Igbo, Indonesian, Irish, Italian, Japanese, Javanese, Kannada, Kazakh, Khmer, Korean, Kurdish (Kurmanji), Kyrgyz, Lao, Latin, Latvian, Lithuanian, Luxembourgish, Macedonian, Malagasy, Malay, Malayalam, Maltese, Maori, Marathi, Mongolian, Myanmar (Burmese), Nepali, Norwegian, Pashto, Persian, Polish, Portuguese, Punjabi, Romanian, Russian, Samoan, Scots Gaelic, Serbian, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenian, Somali, Spanish, Sundanese, Swahili, Swedish, Tajik, Tamil, Telugu, Thai, Turkish, Ukrainian, Urdu, Uzbek, Vietnamese, Welsh, Xhosa, Yiddish, Yoruba, Zulu It is a nice tool for deciphering the odd web pages of interest in other languages. It usually works well for getting the gist of it and some good chuckles too. -- Leon Fisk Grand Rapids MI/Zone 5b Remove no.spam for email |
#29
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Jon Anderson" wrote in message ...
Found this guy's setup while aimlessly wandering the net, thought some might find it of interest. http://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&It emid=53 Jon Thanks for posting this. In the current run-a-way political threads I almost missed it. I like it. I probably won't have one shipped from Oz, but I might make one. If was in the US I'd probably buy one of his. |
#30
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 6/06/2017 2:49 AM, Bob La Londe wrote:
Thanks for posting this. In the current run-a-way political threads I almost missed it. I like it. I probably won't have one shipped from Oz, but I might make one. If was in the US I'd probably buy one of his. Hi Bob, Yeah, wheat/chaff ratio not favorable right now. About time to update filters.. He does have a US distributor, though I didn't follow that link to see who. I'm thinking of buying the kit, to save time, I do like it's well thought out design. Regards, Jon --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#31
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Mon, 5 Jun 2017 08:52:16 -0400, Leon Fisk
wrote: On Sun, 04 Jun 2017 17:12:04 -0700 Larry Jaques wrote: snip Another option would be to try using Google translate and enter the address there. Have it translate English to English. Haven't tried that before but seems like it might work I don't find the server, so how would it...? Google translate does the dns lookup, acts like a proxy. It wouldn't let me do English to English though. But it will do Yiddish to English ;-) https://translate.google.com/transla...%26Itemid%3D53 Your ISP may have blocked that web site. Your DNS server and/or cache may not be up to date. You may have set up a hosts file entry for that site long ago. You may have a Firefox Addon blocking that site. You may have an Adblock utility blocking that site. You may have a cache problem within Firefox... Try this one to view some pricing. Be sitting down https://translate.google.com/transla...2%26Itemid%3D3 Whoo! Not cheap. Who do they think they are, Starrett? I got an error below the URL (This page was not retrieved from its original location over a secure connection.Dismiss) and a 3 minute translation time, but it did finally come through via FF. Poor Jon's $170 square costs just $45 in Portland, OR. And $10 or so to ship in the States. Shipping to and from AU is GHASTLY, usually doubling the price of anything. -- Believe nothing. No matter where you read it, Or who said it, Even if I have said it, Unless it agrees with your own reason And your own common sense. -- Buddha |
#32
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Mon, 5 Jun 2017 09:14:59 -0400, "Jim Wilkins"
wrote: "Leon Fisk" wrote in message news On Sun, 04 Jun 2017 17:12:04 -0700 Larry Jaques wrote: snip Another option would be to try using Google translate and enter the address there. Have it translate English to English. Haven't tried that before but seems like it might work I don't find the server, so how would it...? Google translate does the dns lookup, acts like a proxy. It wouldn't let me do English to English though. But it will do Yiddish to English ;-) Will it translate Aussie to English? Here's the best one I've ever found, ya bloody bodger: http://www.koalanet.com.au/australian-slang.html -- Believe nothing. No matter where you read it, Or who said it, Even if I have said it, Unless it agrees with your own reason And your own common sense. -- Buddha |
#33
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 6/06/2017 11:07 AM, Larry Jaques wrote:
Poor Jon's $170 square costs just $45 in Portland, OR. And $10 or so to ship in the States. Shipping to and from AU is GHASTLY, usually doubling the price of anything. Shipping to AU isn't cheap, and shipping within really isn't either. But I had it in 2 days out of Sydney which is pretty darn good for here. Exchange rate, plus anything really worthwhile (not import crap) really isn't cheap. But it's my livelihood, and a write off to boot. Some Americans never get over sticker shock here. Me, if I really want or need it, I just buy it and don't think about it too much. Jon --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#34
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Larry Jaques" wrote in message
... On Mon, 5 Jun 2017 08:52:16 -0400, Leon Fisk wrote: ... Poor Jon's $170 square costs just $45 in Portland, OR. And $10 or so to ship in the States. Shipping to and from AU is GHASTLY, usually doubling the price of anything. Yet China can ship for free: https://www.amazon.com/TOOGOO-Gauge-.../dp/B00UBOM8XC |
#35
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Tue, 6 Jun 2017 17:55:17 +1000, Jon Anderson
wrote: On 6/06/2017 11:07 AM, Larry Jaques wrote: Poor Jon's $170 square costs just $45 in Portland, OR. And $10 or so to ship in the States. Shipping to and from AU is GHASTLY, usually doubling the price of anything. Shipping to AU isn't cheap, and shipping within really isn't either. But I had it in 2 days out of Sydney which is pretty darn good for here. Yeah, speaking of which, how's the UPS service and pricing there? I'll bet DHL is better represented Down Under. Exchange rate, plus anything really worthwhile (not import crap) really isn't cheap. But it's my livelihood, and a write off to boot. It's much easier to buy expensively when you're reimbursed for it. Some Americans never get over sticker shock here. Me, if I really want or need it, I just buy it and don't think about it too much. I don't think I ever would, being so squeakily frugal meself. -- Average # of people killed in mass shooting when stopped by police: 18.25 Average # of people killed when stopped by civilians: 2 Save lives: Keep Civilians Armed! |
#36
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Tue, 6 Jun 2017 08:34:50 -0400, "Jim Wilkins"
wrote: "Larry Jaques" wrote in message .. . On Mon, 5 Jun 2017 08:52:16 -0400, Leon Fisk wrote: ... Poor Jon's $170 square costs just $45 in Portland, OR. And $10 or so to ship in the States. Shipping to and from AU is GHASTLY, usually doubling the price of anything. Yet China can ship for free: https://www.amazon.com/TOOGOO-Gauge-.../dp/B00UBOM8XC That's 12 cents worth of wire, sold for $4, and shipping is free compliments of the Chinese government subsidies. It is said that no shipping container ever leaves there with any airspace in it, and I believe it. -- Average # of people killed in mass shooting when stopped by police: 18.25 Average # of people killed when stopped by civilians: 2 Save lives: Keep Civilians Armed! |
#37
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
"Larry Jaques" wrote in message ... On Tue, 6 Jun 2017 08:34:50 -0400, "Jim Wilkins" wrote: Yet China can ship for free: https://www.amazon.com/TOOGOO-Gauge-.../dp/B00UBOM8XC That's 12 cents worth of wire, sold for $4, and shipping is free compliments of the Chinese government subsidies. It is said that no shipping container ever leaves there with any airspace in it, and I believe it. Who offers that wire for 12 cents? |
#38
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On 7/06/2017 10:29 AM, Larry Jaques wrote:
Yeah, speaking of which, how's the UPS service and pricing there? I'll bet DHL is better represented Down Under. Have bought a few things from China/Taiwan, comes same as in the States. Items from the States, USPS. Within AU, Australian Post (which is a private operation) Had to send first tax returns via FedEx, that entailed a 2.5 hour drive to Canberra and cost over $70. Some Americans never get over sticker shock here. Me, if I really want or need it, I just buy it and don't think about it too much. I don't think I ever would, being so squeakily frugal meself. Best not be thinking of moving here then... Besides, the cost of applying for immigration is going, or already gone, way the **** up. Think it's near $7k now. Cost me IIRC, about $3k, which was right there, over a grand increase from when I first knew I was going to move. Jon --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#39
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Tue, 6 Jun 2017 21:39:23 -0400, "Jim Wilkins"
wrote: "Larry Jaques" wrote in message .. . On Tue, 6 Jun 2017 08:34:50 -0400, "Jim Wilkins" wrote: Yet China can ship for free: https://www.amazon.com/TOOGOO-Gauge-.../dp/B00UBOM8XC That's 12 cents worth of wire, sold for $4, and shipping is free compliments of the Chinese government subsidies. It is said that no shipping container ever leaves there with any airspace in it, and I believe it. Who offers that wire for 12 cents? I'm sure I've seen it for a penny (+s/h) on ebay, but it was more an observation of so much Chinese pricing than a standard for that particular wire. I paid $2.90 delivered for 2x 3M after being outbid on a dozen penny auctions. g -- Average # of people killed in mass shooting when stopped by police: 18.25 Average # of people killed when stopped by civilians: 2 Save lives: Keep Civilians Armed! |
#40
Posted to rec.crafts.metalworking
|
|||
|
|||
Interesting tool sharpening system from Down Under
On Wed, 7 Jun 2017 13:32:56 +1000, Jon Anderson
wrote: On 7/06/2017 10:29 AM, Larry Jaques wrote: Yeah, speaking of which, how's the UPS service and pricing there? I'll bet DHL is better represented Down Under. Have bought a few things from China/Taiwan, comes same as in the States. Items from the States, USPS. Within AU, Australian Post (which is a private operation) Had to send first tax returns via FedEx, that entailed a 2.5 hour drive to Canberra and cost over $70. Some Americans never get over sticker shock here. Me, if I really want or need it, I just buy it and don't think about it too much. I don't think I ever would, being so squeakily frugal meself. Best not be thinking of moving here then... Although the women are stunning, so are the prices. I won't be joining you, Jon. Eek! Besides, the cost of applying for immigration is going, or already gone, way the **** up. Think it's near $7k now. Cost me IIRC, about $3k, which was right there, over a grand increase from when I first knew I was going to move. Are they allowing Muslim refugees? Oh, well the AU-US refugee trade sucks. WTF? -- Average # of people killed in mass shooting when stopped by police: 18.25 Average # of people killed when stopped by civilians: 2 Save lives: Keep Civilians Armed! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Interesting Band Saw sharpening video.. Brand new blade is dull comparedto sharpened blade | Woodworking | |||
Sharpening Clamp - Bench - Saw Sharpening Vise2.jpg (1/1) | Woodworking Plans and Photos | |||
Sharpening Clamp - Bench - Saw Sharpening Vise2.jpg (0/1) | Woodworking Plans and Photos | |||
Interesting....veddy interesting....OT of course. | Metalworking | |||
Interesting....veddy interesting....OT of course. | Metalworking |