Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
http://s991.photobucket.com/user/Sna...?sort=3&page=1
Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote:
http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
jon_banquer wrote:
On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . -- Snag |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Wednesday, May 13, 2015 at 2:35:47 PM UTC-7, Terry Coombs wrote:
jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . -- Snag Because much of the metal is eaten a way, I don't think powder coating is a good idea. I think it's faster and easier to use POR-15 which gets hard as hell. It drives very much like a ceramic. I think this is the way to go on metal that's severely compromised like your deck is. If the metal was in great shape I'd powder coat it. I would not use Rhino Liner period because I don't think it's really meant for an application like this. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
jon_banquer wrote:
On Wednesday, May 13, 2015 at 2:35:47 PM UTC-7, Terry Coombs wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . -- Snag Because much of the metal is eaten a way, I don't think powder coating is a good idea. I think it's faster and easier to use POR-15 which gets hard as hell. It drives very much like a ceramic. I think this is the way to go on metal that's severely compromised like your deck is. If the metal was in great shape I'd powder coat it. I would not use Rhino Liner period because I don't think it's really meant for an application like this. Which deck are you referring to as "being eaten away" ? I'm not going to use the one with holes in it , that one is going on the scrap heap - I've already stripped most everything but the wheels from it and I'll be taking those off too . The other one has some pitting , but is overall in pretty good shape . -- Snag |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Wednesday, May 13, 2015 at 3:23:13 PM UTC-7, Terry Coombs wrote:
jon_banquer wrote: On Wednesday, May 13, 2015 at 2:35:47 PM UTC-7, Terry Coombs wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . -- Snag Because much of the metal is eaten a way, I don't think powder coating is a good idea. I think it's faster and easier to use POR-15 which gets hard as hell. It drives very much like a ceramic. I think this is the way to go on metal that's severely compromised like your deck is. If the metal was in great shape I'd powder coat it. I would not use Rhino Liner period because I don't think it's really meant for an application like this. Which deck are you referring to as "being eaten away" ? I'm not going to use the one with holes in it , that one is going on the scrap heap - I've already stripped most everything but the wheels from it and I'll be taking those off too . The other one has some pitting , but is overall in pretty good shape . -- Snag The one that can be seen in the link you gave above. |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Wednesday, May 13, 2015 at 3:23:13 PM UTC-7, Terry Coombs wrote:
jon_banquer wrote: On Wednesday, May 13, 2015 at 2:35:47 PM UTC-7, Terry Coombs wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . -- Snag Because much of the metal is eaten a way, I don't think powder coating is a good idea. I think it's faster and easier to use POR-15 which gets hard as hell. It drives very much like a ceramic. I think this is the way to go on metal that's severely compromised like your deck is. If the metal was in great shape I'd powder coat it. I would not use Rhino Liner period because I don't think it's really meant for an application like this. Which deck are you referring to as "being eaten away" ? I'm not going to use the one with holes in it , that one is going on the scrap heap - I've already stripped most everything but the wheels from it and I'll be taking those off too . The other one has some pitting , but is overall in pretty good shape . -- Snag If you still have a good deal of deep pitting I feel you are much better off with POR-15 |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
Terry Coombs wrote:
http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . Sandblast might reveal more damage. I've used just about every coating on a deck. Most don't hold up to the constant abuse under the deck. The only two that have lasted longest were the factory powder coat and good enamel with a topcoat of the non rubberized bed liner. Both lasted longer with a good coat of slip plate paint (graphite paint). If the price was lower I would ceramic coat the underside. That would take a beating but it isn't in the budget $$$$$. -- Steve W. |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs"
wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . How about good old alkyd on top and the new waterproofer underneath? NeverWet http://tinyurl.com/obmo7dy I wonder if it'd hold up... -- Vidi, Vici, Veni |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
There might be brackets or spindles that you can weld on to the newer
one to fix it from the old junker. I have a disabled mower - have better ones now - but it needed a bracket that the factory stopped making and I had to get one made. Martin On 5/13/2015 3:24 PM, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
Martin Eastburn wrote:
There might be brackets or spindles that you can weld on to the newer one to fix it from the old junker. I have a disabled mower - have better ones now - but it needed a bracket that the factory stopped making and I had to get one made. Martin On 5/13/2015 3:24 PM, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 I did have to move the rear mount brackets over . Right now it's awaiting some paint work and one more small place that needs welded . Then it's just bolting stuff back on and mounting it . -- Snag |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Fri, 15 May 2015 06:58:35 -0500
"Terry Coombs" wrote: snip I did have to move the rear mount brackets over . Right now it's awaiting some paint work and one more small place that needs welded . Then it's just bolting stuff back on and mounting it . and leveling it... For your use, rough cutting, it probably won't matter much. The blades should be a little bit lower in front, maybe a 1/4 inch or so as compared to the rear. They cut better that way. And of course they should be the same side to side. It can take an hour or two of fuddling around to get a deck leveled nice. Something that rarely gets done if you buy a new one nowadays... -- Leon Fisk Grand Rapids MI/Zone 5b Remove no.spam for email |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
Leon Fisk wrote:
On Fri, 15 May 2015 06:58:35 -0500 "Terry Coombs" wrote: snip I did have to move the rear mount brackets over . Right now it's awaiting some paint work and one more small place that needs welded . Then it's just bolting stuff back on and mounting it . and leveling it... For your use, rough cutting, it probably won't matter much. The blades should be a little bit lower in front, maybe a 1/4 inch or so as compared to the rear. They cut better that way. And of course they should be the same side to side. It can take an hour or two of fuddling around to get a deck leveled nice. Something that rarely gets done if you buy a new one nowadays... Yeah , I was wondering about that too . As you say , for what I'm doing it's not critical , but still I think it wise to do it right . The hard part is going to be finding a flat level place to do it ... the only flat level place here is the concrete slab my shop sits on . And it's covered up with the shop and "stuff" . -- Snag |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Fri, 15 May 2015 08:00:01 -0500
"Terry Coombs" wrote: Yeah , I was wondering about that too . As you say , for what I'm doing it's not critical , but still I think it wise to do it right . The hard part is going to be finding a flat level place to do it ... the only flat level place here is the concrete slab my shop sits on . And it's covered up with the shop and "stuff" . You could probably get away with a decent sheet of plywood for your surface with some well placed supports underneath... -- Leon Fisk Grand Rapids MI/Zone 5b Remove no.spam for email |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Fri, 15 May 2015 14:42:29 -0400, Leon Fisk
wrote: On Fri, 15 May 2015 08:00:01 -0500 "Terry Coombs" wrote: Yeah , I was wondering about that too . As you say , for what I'm doing it's not critical , but still I think it wise to do it right . The hard part is going to be finding a flat level place to do it ... the only flat level place here is the concrete slab my shop sits on . And it's covered up with the shop and "stuff" . You could probably get away with a decent sheet of plywood for your surface with some well placed supports underneath... or just rake some bare ground level, wet it down and pack it - let it bake in the sun and set the tractor on it.. You don;t need a perfectly flat granite surface plate to set up a lawn mower!!! |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
|
#18
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
wrote:
On Fri, 15 May 2015 17:41:17 -0700, Larry Jaques wrote: On Fri, 15 May 2015 16:48:31 -0400, wrote: On Fri, 15 May 2015 14:42:29 -0400, Leon Fisk wrote: On Fri, 15 May 2015 08:00:01 -0500 "Terry Coombs" wrote: Yeah , I was wondering about that too . As you say , for what I'm doing it's not critical , but still I think it wise to do it right . The hard part is going to be finding a flat level place to do it ... the only flat level place here is the concrete slab my shop sits on . And it's covered up with the shop and "stuff" . You could probably get away with a decent sheet of plywood for your surface with some well placed supports underneath... or just rake some bare ground level, wet it down and pack it - let it bake in the sun and set the tractor on it.. You don;t need a perfectly flat granite surface plate to set up a lawn mower!!! Got a sheet of plywood? Lay it down, run the mower up on it, and set the level. That was recommended just before the level ground. And I just happen to have a sheet of 3/4 plywood ... I'll probably roll the tractor up onto it before I mount the deck , gotta be easier than draggin' that deck over the dirt and grass/weeds to position it for mounting .. Today was a pretty good day . I got out my HF sandblaster and it actually worked pretty good to get most of the rust off . I then sprayed the bare/rusted areas with some rust conversion primer and started bolting stuff back on it . Got the 3 best spindles of the 6 I have mounted and blades on them . One small weld still to do and the front roller to mount and I can flip it right side up and install the rest of the mounting hardware . I had to do some build-up welding on the pulley block that tensions the drive belt and turns the belt from vert to horizontal , the pivots the tensioner rides on were worn - as was the rear mount pivot bar . Adjustment clevises clevi? were rusted in place and had to be heated to get them moving . If all goes well , tomorrow I mount the deck and test it . It'll be a short test because the front tires are dry rotted and starting to come apart , new ones will be in on Monday . -- Snag |
#19
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Fri, 15 May 2015 21:26:51 -0400, wrote:
On Fri, 15 May 2015 17:41:17 -0700, Larry Jaques wrote: On Fri, 15 May 2015 16:48:31 -0400, wrote: On Fri, 15 May 2015 14:42:29 -0400, Leon Fisk wrote: On Fri, 15 May 2015 08:00:01 -0500 "Terry Coombs" wrote: Yeah , I was wondering about that too . As you say , for what I'm doing it's not critical , but still I think it wise to do it right . The hard part is going to be finding a flat level place to do it ... the only flat level place here is the concrete slab my shop sits on . And it's covered up with the shop and "stuff" . You could probably get away with a decent sheet of plywood for your surface with some well placed supports underneath... or just rake some bare ground level, wet it down and pack it - let it bake in the sun and set the tractor on it.. You don;t need a perfectly flat granite surface plate to set up a lawn mower!!! Got a sheet of plywood? Lay it down, run the mower up on it, and set the level. That was recommended just before the level ground. Sorry, missed it completely. -- Vidi, Vici, Veni |
#20
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Fri, 15 May 2015 21:43:23 -0500, "Terry Coombs"
wrote: wrote: On Fri, 15 May 2015 17:41:17 -0700, Larry Jaques wrote: On Fri, 15 May 2015 16:48:31 -0400, wrote: On Fri, 15 May 2015 14:42:29 -0400, Leon Fisk wrote: On Fri, 15 May 2015 08:00:01 -0500 "Terry Coombs" wrote: Yeah , I was wondering about that too . As you say , for what I'm doing it's not critical , but still I think it wise to do it right . The hard part is going to be finding a flat level place to do it ... the only flat level place here is the concrete slab my shop sits on . And it's covered up with the shop and "stuff" . You could probably get away with a decent sheet of plywood for your surface with some well placed supports underneath... or just rake some bare ground level, wet it down and pack it - let it bake in the sun and set the tractor on it.. You don;t need a perfectly flat granite surface plate to set up a lawn mower!!! Got a sheet of plywood? Lay it down, run the mower up on it, and set the level. That was recommended just before the level ground. And I just happen to have a sheet of 3/4 plywood ... I'll probably roll the tractor up onto it before I mount the deck , gotta be easier than draggin' that deck over the dirt and grass/weeds to position it for mounting . Today was a pretty good day . I got out my HF sandblaster and it actually worked pretty good to get most of the rust off . I then sprayed the bare/rusted areas with some rust conversion primer and started bolting stuff back on it . Got the 3 best spindles of the 6 I have mounted and blades on How did you handle the pivots for the blades, so they don't eat each other when they hit something? Or did you attack that mod yet? them . One small weld still to do and the front roller to mount and I can flip it right side up and install the rest of the mounting hardware . I had to do some build-up welding on the pulley block that tensions the drive belt and turns the belt from vert to horizontal , the pivots the tensioner rides Ick, vert to horz? I hate it when they do that. It kills belts so durned quickly, and those belts are usually double the price to begin with. on were worn - as was the rear mount pivot bar . Adjustment clevises clevi? were rusted in place and had to be heated to get them moving . If Clevum? Nah, it's clevises. all goes well , tomorrow I mount the deck and test it . It'll be a short test because the front tires are dry rotted and starting to come apart , new ones will be in on Monday . -- Vidi, Vici, Veni |
#21
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
Larry Jaques wrote:
How did you handle the pivots for the blades, so they don't eat each other when they hit something? Or did you attack that mod yet? I'm saving that mod for another day . I think the only way that's going to work is if the blades are short enough that they can't meet in the middle , which will require a larger disc than I'd previopusly considerd . It may not be feasible with the small diameters I'm working with , the original blades are only 16" long . -- Snag |
#22
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Sat, 16 May 2015 00:10:42 -0500, "Terry Coombs"
wrote: Larry Jaques wrote: How did you handle the pivots for the blades, so they don't eat each other when they hit something? Or did you attack that mod yet? I'm saving that mod for another day . I think the only way that's going to work is if the blades are short enough that they can't meet in the middle , which will require a larger disc than I'd previopusly considerd . It may not be feasible with the small diameters I'm working with , the original blades are only 16" long . Yeah, it sounds tricky at best, especially considering that the shape of the blade defines the evacuation efficiency of the grass from the deck. -- Vidi, Vici, Veni |
#23
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs"
wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Gunner |
#24
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch
wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. -- When we are planning for posterity, we ought to remember that virtue is not hereditary. -- Thomas Paine (comparing Paine to the current CONgress deep sigh) |
#25
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
Larry Jaques wrote:
On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. -- When we are planning for posterity, we ought to remember that virtue is not hereditary. -- Thomas Paine (comparing Paine to the current CONgress deep sigh) You can get liner that doesn't have the texture as well. When you consider just what goes on under that deck when you're mowing it's hard to come up with something that can be easily applied but can handle the abuse! -- Steve W. |
#26
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques
wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Gunner |
#27
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Sunday, May 17, 2015 at 12:01:21 PM UTC-7, Steve W. wrote:
Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. -- When we are planning for posterity, we ought to remember that virtue is not hereditary. -- Thomas Paine (comparing Paine to the current CONgress deep sigh) You can get liner that doesn't have the texture as well. When you consider just what goes on under that deck when you're mowing it's hard to come up with something that can be easily applied but can handle the abuse! -- Steve W. Its' not hard at all to come up with a good approach. |
#28
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Sunday, May 17, 2015 at 10:14:08 AM UTC-7, Larry Jaques wrote:
On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. -- When we are planning for posterity, we ought to remember that virtue is not hereditary. -- Thomas Paine (comparing Paine to the current CONgress deep sigh) Larry Jackass is an idiot. Slide-in bedliners often hold moisture between the plastic liner and the bed. This is the reason just about everyone moved to a spray on coating. |
#29
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Sun, 17 May 2015 12:37:35 -0700, Gunner Asch
wrote: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Gunner When I re-made the deck on my high-wheeler I used stainless steel. Works a treat, but mowing on a sunny day REQUIRES wearing sun glasses!!!! |
#30
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
Gunner Asch on Sun, 17 May 2015 12:37:35 -0700
typed in rec.crafts.metalworking the following: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Good idea. I've a Toro which is suffering serious mower deck rot. Along with a few other problems. Heck, I';ve got almost $30 in it, not sure if I want to keep up the effort. (it was a found mower given me by a friend. He now wishes he had kept it.) -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." |
#31
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Sun, 17 May 2015 16:25:39 -0400, wrote:
On Sun, 17 May 2015 12:37:35 -0700, Gunner Asch wrote: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Gunner When I re-made the deck on my high-wheeler I used stainless steel. Works a treat, but mowing on a sunny day REQUIRES wearing sun glasses!!!! LOL!! Paint might help a bit....you know what I mean? (Grin) |
#32
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Mon, 18 May 2015 01:41:36 -0700, Gunner Asch
wrote: On Sun, 17 May 2015 16:25:39 -0400, wrote: On Sun, 17 May 2015 12:37:35 -0700, Gunner Asch wrote: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Gunner When I re-made the deck on my high-wheeler I used stainless steel. Works a treat, but mowing on a sunny day REQUIRES wearing sun glasses!!!! LOL!! Paint might help a bit....you know what I mean? (Grin) What? And lose the "bling" factor and the Stevie Wonder look? -- When we are planning for posterity, we ought to remember that virtue is not hereditary. -- Thomas Paine (comparing Paine to the current CONgress deep sigh) |
#33
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Mon, 18 May 2015 05:52:10 -0700, Larry Jaques
wrote: Gunner When I re-made the deck on my high-wheeler I used stainless steel. Works a treat, but mowing on a sunny day REQUIRES wearing sun glasses!!!! LOL!! Paint might help a bit....you know what I mean? (Grin) What? And lose the "bling" factor and the Stevie Wonder look? Humm...decals....big NASCAR decals!! That will do it!! http://www.summitracing.com/parts/lt...qGaQodclAA Ow http://www.jpcycles.com/product/161-...GBaQod0QcAx w http://www.purpleharley.com/Decals_auto.htm |
#34
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Mon, 18 May 2015 01:41:36 -0700, Gunner Asch
wrote: On Sun, 17 May 2015 16:25:39 -0400, wrote: On Sun, 17 May 2015 12:37:35 -0700, Gunner Asch wrote: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Gunner When I re-made the deck on my high-wheeler I used stainless steel. Works a treat, but mowing on a sunny day REQUIRES wearing sun glasses!!!! LOL!! Paint might help a bit....you know what I mean? (Grin) I'll put up with the glare - I'm supposed to wear sun protection anyeay (cataracts) |
#35
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Mon, 18 May 2015 09:22:18 -0700, Gunner Asch
wrote: On Mon, 18 May 2015 05:52:10 -0700, Larry Jaques wrote: Gunner When I re-made the deck on my high-wheeler I used stainless steel. Works a treat, but mowing on a sunny day REQUIRES wearing sun glasses!!!! LOL!! Paint might help a bit....you know what I mean? (Grin) What? And lose the "bling" factor and the Stevie Wonder look? Humm...decals....big NASCAR decals!! That will do it!! http://www.summitracing.com/parts/lt...qGaQodclAA Ow http://www.jpcycles.com/product/161-...GBaQod0QcAx w http://www.purpleharley.com/Decals_auto.htm Just let it get dusty and don't bother washing it off works too, but I hate putting it away dirty. |
#36
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Sun, 17 May 2015 20:40:13 -0700, pyotr filipivich
wrote: Gunner Asch on Sun, 17 May 2015 12:37:35 -0700 typed in rec.crafts.metalworking the following: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Good idea. I've a Toro which is suffering serious mower deck rot. Along with a few other problems. Heck, I';ve got almost $30 in it, not sure if I want to keep up the effort. (it was a found mower given me by a friend. He now wishes he had kept it.) -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." The mower I just used is a deck from a 22" unit that junior dragged home afterit suffered a bent crank due to eithe a large rock or concrete step plus a serious infection by the "eye-dee-ten- tea"mechanic virus and the motor from a dumpster dive by second son that developed independent suspension. No, Clare, I still haven't motorized the stainless deck you provided; I'm still looking for a bag unit to fit the self propelled power unit destined for it, I may end up going bagless. --- Gerry :-)} London,Canada |
#37
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Mon, 18 May 2015 20:42:19 -0400, wrote:
On Sun, 17 May 2015 20:40:13 -0700, pyotr filipivich wrote: Gunner Asch on Sun, 17 May 2015 12:37:35 -0700 typed in rec.crafts.metalworking the following: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Good idea. I've a Toro which is suffering serious mower deck rot. Along with a few other problems. Heck, I';ve got almost $30 in it, not sure if I want to keep up the effort. (it was a found mower given me by a friend. He now wishes he had kept it.) -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." The mower I just used is a deck from a 22" unit that junior dragged home afterit suffered a bent crank due to eithe a large rock or concrete step plus a serious infection by the "eye-dee-ten- tea"mechanic virus and the motor from a dumpster dive by second son that developed independent suspension. No, Clare, I still haven't motorized the stainless deck you provided; I'm still looking for a bag unit to fit the self propelled power unit destined for it, I may end up going bagless. --- Gerry :-)} London,Canada Good to see you still have plans for it Gerry. Did I have the blue Bolton engine on my hi-wheeler when you were up or did I still have the little old Briggs on it??? I'll be rebuilding a little Deere rider this summer - Kawasaki engine that the crankcase bolts backed out of, causing the base gasket to allow oil to escape all over the place. |
#38
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Mon, 18 May 2015 20:42:19 -0400, wrote:
On Sun, 17 May 2015 20:40:13 -0700, pyotr filipivich wrote: Gunner Asch on Sun, 17 May 2015 12:37:35 -0700 typed in rec.crafts.metalworking the following: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Good idea. I've a Toro which is suffering serious mower deck rot. Along with a few other problems. Heck, I';ve got almost $30 in it, not sure if I want to keep up the effort. (it was a found mower given me by a friend. He now wishes he had kept it.) -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." The mower I just used is a deck from a 22" unit that junior dragged home afterit suffered a bent crank due to eithe a large rock or concrete step plus a serious infection by the "eye-dee-ten- tea"mechanic virus Huh? and the motor from a dumpster dive by second son that developed independent suspension. No, Clare, I still haven't motorized the stainless deck you provided; I'm still looking for a bag unit to fit the self propelled power unit destined for it, I may end up going bagless. Bagless is much better for the lawn. And letting the grass get longer is better, too. It uses less water. Mulch the cut stuff and it disappears into the long grass instantly, so the wifey is OK with it. -- When we are planning for posterity, we ought to remember that virtue is not hereditary. -- Thomas Paine (comparing Paine to the current CONgress deep sigh) |
#39
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Mon, 18 May 2015 21:00:45 -0400, wrote:
On Mon, 18 May 2015 20:42:19 -0400, wrote: On Sun, 17 May 2015 20:40:13 -0700, pyotr filipivich wrote: Gunner Asch on Sun, 17 May 2015 12:37:35 -0700 typed in rec.crafts.metalworking the following: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Good idea. I've a Toro which is suffering serious mower deck rot. Along with a few other problems. Heck, I';ve got almost $30 in it, not sure if I want to keep up the effort. (it was a found mower given me by a friend. He now wishes he had kept it.) -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." The mower I just used is a deck from a 22" unit that junior dragged home afterit suffered a bent crank due to eithe a large rock or concrete step plus a serious infection by the "eye-dee-ten- tea"mechanic virus and the motor from a dumpster dive by second son that developed independent suspension. No, Clare, I still haven't motorized the stainless deck you provided; I'm still looking for a bag unit to fit the self propelled power unit destined for it, I may end up going bagless. --- Gerry :-)} London,Canada Good to see you still have plans for it Gerry. Did I have the blue Bolton engine on my hi-wheeler when you were up or did I still have the little old Briggs on it??? I'll be rebuilding a little Deere rider this summer - Kawasaki engine that the crankcase bolts backed out of, causing the base gasket to allow oil to escape all over the place. IIRC it was the B&S --- Gerry :-)} London,Canada |
#40
Posted to rec.crafts.metalworking
|
|||
|
|||
Almost done !
On Tuesday, May 19, 2015 at 8:57:10 AM UTC-4, Larry Jaques wrote:
On Mon, 18 May 2015 20:42:19 -0400, wrote: On Sun, 17 May 2015 20:40:13 -0700, pyotr filipivich wrote: Gunner Asch on Sun, 17 May 2015 12:37:35 -0700 typed in rec.crafts.metalworking the following: On Sun, 17 May 2015 10:14:06 -0700, Larry Jaques wrote: On Sun, 17 May 2015 07:38:21 -0700, Gunner Asch wrote: On Wed, 13 May 2015 16:35:42 -0500, "Terry Coombs" wrote: jon_banquer wrote: On Wednesday, May 13, 2015 at 1:24:37 PM UTC-7, Terry Coombs wrote: http://s991.photobucket.com/user/Sna...?sort=3&page=1 Got all the repairs done to the "new" mower deck , all I need to do now is bolt stuff back on it - after a sandblast and some paint . To my critics - I think you might have been confused , the deck with the serious cancer is going to be scrapped . The best parts of both will be kept . -- Snag I would have used POR-15 on this deck: https://www.youtube.com/watch?v=uuDcvwEIkPI I haven't decided what to coat it with , there's a chance I can get it done with Rhino Liner . A good friend runs a car resto business and he's a dealer . He's also the one who has the sandblaster I'll be using to clean it up . I'd like to have it powder coated , but the budget won't go there . Probably end up using an industrial enamel paint . Rhino Liner or a clone gets my vote for this, Seriously good for this sort of application!!! Does that stuff shed sticky grass well? The coarse texture I've felt when looking at spray-on bedliners didn't seem the type which would work well for easy cleaning. I've always _much_ preferred the slide-in bedliners. Oh hell yes. Slides off like runny snot from your nose. And when you are done..simply stick the hose in the output port and spray the dust out of it. Bed liner..some of the best stuff ever made for that sort of app. Good idea. I've a Toro which is suffering serious mower deck rot. Along with a few other problems. Heck, I';ve got almost $30 in it, not sure if I want to keep up the effort. (it was a found mower given me by a friend. He now wishes he had kept it.) -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." The mower I just used is a deck from a 22" unit that junior dragged home afterit suffered a bent crank due to eithe a large rock or concrete step plus a serious infection by the "eye-dee-ten- tea"mechanic virus Huh? and the motor from a dumpster dive by second son that developed independent suspension. No, Clare, I still haven't motorized the stainless deck you provided; I'm still looking for a bag unit to fit the self propelled power unit destined for it, I may end up going bagless. Bagless is much better for the lawn. And letting the grass get longer is better, too. It uses less water. Mulch the cut stuff and it disappears into the long grass instantly, so the wifey is OK with it. -- When we are planning for posterity, we ought to remember that virtue is not hereditary. -- Thomas Paine (comparing Paine to the current CONgress deep sigh) |