Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
Has anyone here had experience with using LED replacements for fluorescent tubes? They're becoming affordable (1200mm T8 tubes from about £20) and I was thinking of using LED tubes in a standard dual batten lampholder with polycarbonate diffuser fitted, with the ballast circuit bypassed.
What's the light quality from them like? In particular, I notice the light output seems to be directional, which will no doubt affect the light quality, but does this matter in reality? TIA, David. |
#2
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
In article ,
Dave N wrote: Has anyone here had experience with using LED replacements for fluorescent tubes? They're becoming affordable (1200mm T8 tubes from about £20) and I was thinking of using LED tubes in a standard dual batten lampholder with polycarbonate diffuser fitted, with the ballast circuit bypassed. What's the light quality from them like? In particular, I notice the light output seems to be directional, which will no doubt affect the light quality, but does this matter in reality? I'd ask why? Fluorescents have an extremely long life using well proven technology, are very efficient using decent electronic ballasts, and have a wide variety of colour temperature tubes - at least in the common sizes. And give an even light over their entire length. -- *Lawyers believe a man is innocent until proven broke. Dave Plowman London SW To e-mail, change noise into sound. |
#3
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
I'd ask why?
There's a particular reason why - the lighting is for a room for use by disabled people, some of whom have indicated an intolerance of fluorescent lighting. We're trying to offer an economical alternative. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
Are we talking visually impaired here? I think you need to be extra careful,
as some of the led units have a far worse flicker than normal tubes, and in some cases the colour temperature is so lumpy in the visible spectrum that many VIPs complain of the light being grainy and causing poor contrast. Far better I think to use a good make of electronic ballast with conventional tubes then get specific task lighting in for those who need it. Brian -- From the Sofa of Brian Gaff Reply address is active wrote in message ... I'd ask why? There's a particular reason why - the lighting is for a room for use by disabled people, some of whom have indicated an intolerance of fluorescent lighting. We're trying to offer an economical alternative. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
On 25/03/2013 14:29, dave wrote:
On Mon, 25 Mar 2013 14:19:52 -0000, "Brian Gaff" wrote: Are we talking visually impaired here? I think you need to be extra careful, as some of the led units have a far worse flicker than normal tubes, and in some cases the colour temperature is so lumpy in the visible spectrum that many VIPs complain of the light being grainy and causing poor contrast. Far better I think to use a good make of electronic ballast with conventional tubes then get specific task lighting in for those who need it. Brian How does one know the quailty of the elctronic ballast? If I buy a fl.tube light from say B&Q is the fact it is "modern" some assurance it is better than much older designs? No, and in fact unless it explicitly states it contains an electronic ballast, there is a fair chance it doesn't... You can buy them separately for retrofitting though. The fl.fitting in our kitchen is 30 years old :-) Yours and all the others! -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#6
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
In article ,
wrote: I'd ask why? There's a particular reason why - the lighting is for a room for use by disabled people, some of whom have indicated an intolerance of fluorescent lighting. We're trying to offer an economical alternative. That is likely caused by flicker. Changing to electronic ballasts sorts this as they run at a much higher frequency than mains. You'd also have to be careful if changing to LED - some drivers for these cause flicker too. -- *My luck is so bad that if I bought a cemetery, people would stop dying. Dave Plowman London SW To e-mail, change noise into sound. |
#7
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
On 25/03/2013 14:29, dave wrote:
On Mon, 25 Mar 2013 14:19:52 -0000, "Brian Gaff" wrote: Are we talking visually impaired here? I think you need to be extra careful, as some of the led units have a far worse flicker than normal tubes, and in some cases the colour temperature is so lumpy in the visible spectrum that many VIPs complain of the light being grainy and causing poor contrast. Far better I think to use a good make of electronic ballast with conventional tubes then get specific task lighting in for those who need it. Brian How does one know the quailty of the elctronic ballast? If I buy a fl.tube light from say B&Q is the fact it is "modern" some assurance it is better than much older designs? The fl.fitting in our kitchen is 30 years old :-) When I was in B&Q a few weeks ago they only had one slimline fitting with electronic ballast, all the others were "old fashioned" ballasts. |
#8
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
On 25/03/2013 16:11, Dave Plowman (News) wrote:
You'd also have to be careful if changing to LED - some drivers for these cause flicker too. I've seen LED spots with far worse flicker than any healthy fluorescent. I think they may have been strobing at 50Hz with a short on, long off pattern. Andy |
#9
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
En el artículo ,
Dave N escribió: Has anyone here had experience with using LED replacements for fluorescent tubes? No experience in a domestic environment but seeing them more and more often in commercial premises, airports, hotels, etc. What's the light quality from them like? It's very white, makes halogen look yellowish. Similar to comparing xenon headlights with incandescent on cars - you think incandescent are white until you see both together, e.g. on the motorway. As others have said, the spectrum isn't wonderful. In a hotel room lit by LED light recently I thought the light quality was very good - close enough to halogen for me to have a squint at the fitting to see what was there - but when I took out my vitamin C tablets, which are bright orange in natural light, they were very washed out under LED light. It made me think that some interestingly-coloured food could come out of kitchens lit by LED. In particular, I notice the light output seems to be directional LEDs are directional by nature. A diffuser, as you mentioned, will definitely help to, um, diffuse the light. Recently I saw some fittings which has been retro-fitted with LED. They were the sort that had metal reflectors above the tube to direct light downward, and no diffuser. LED light is very harsh and not pleasant to look at directly. The tubes had been fitted with the LEDs pointing down; I'd wondered if it would have been better to install them pointing up, so that he light was scattered off the reflector, indirect lighting in other words. Finally, all the LED tubes I've seen have been clear plastic. Wondering if using opaque material would cause them to emit a more even light. -- (\_/) (='.'=) (")_(") |
#10
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
On Tue, 26 Mar 2013 05:57:04 +0000, Mike Tomlinson wrote:
Finally, all the LED tubes I've seen have been clear plastic. Wondering if using opaque material would cause them to emit a more even light. No. -- Peter. The gods will stay away whilst religions hold sway |
#11
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
In article ,
Mike Tomlinson wrote: It's very white, makes halogen look yellowish. Similar to comparing xenon headlights with incandescent on cars - you think incandescent are white until you see both together, e.g. on the motorway. That depends on the colour temperature of the HID units. Some now have CT close to halogen. Of course with those you may think they are halogen. As others have said, the spectrum isn't wonderful. In a hotel room lit by LED light recently I thought the light quality was very good - close enough to halogen for me to have a squint at the fitting to see what was there - but when I took out my vitamin C tablets, which are bright orange in natural light, they were very washed out under LED light. It made me think that some interestingly-coloured food could come out of kitchens lit by LED. Quite. It is rather obviously proving difficult to provide a continuous spectrum LED at a sensible price while retaining efficiency. This may not matter to some - but I'd find it very annoying for domestic use. -- *Why isn't 11 pronounced onety one? * Dave Plowman London SW To e-mail, change noise into sound. |
#12
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
In article , Dave Plowman (News) wrote:
In article , wrote: I'd ask why? There's a particular reason why - the lighting is for a room for use by disabled people, some of whom have indicated an intolerance of fluorescent lighting. We're trying to offer an economical alternative. That is likely caused by flicker. Changing to electronic ballasts sorts this as they run at a much higher frequency than mains. Though http://en.wikipedia.org/wiki/Fluores...licker_Effects says there's also a perceived flicker effect that affects some people as a result of the spiked spectral pattern of the light output, even when using high frequency ballasts. But changing to LEDs won't necessarily help with that. (And as other people have said, whether it will help with 100Hz flicker depends on the drivers (and, as with fluorescent, the phosphor used).) |
#13
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
In article , Dave Plowman (News) wrote:
In article , Mike Tomlinson wrote: It's very white, makes halogen look yellowish. Similar to comparing xenon headlights with incandescent on cars - you think incandescent are white until you see both together, e.g. on the motorway. That depends on the colour temperature of the HID units. There are also "xenon" headlights that aren't HID, but supposedly whiter than halogen: http://www.autobulbsdirect.co.uk/Xenon-Bulbs.html http://www.autoexpress.co.uk/car-mai...g-xenon-ultima http://reviews.ebay.co.uk/Xenon-bulb...00000000088042 |
#14
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
On 26/03/2013 17:44, Alan Braggins wrote:
In article , Dave Plowman (News) wrote: In article , Mike Tomlinson wrote: It's very white, makes halogen look yellowish. Similar to comparing xenon headlights with incandescent on cars - you think incandescent are white until you see both together, e.g. on the motorway. That depends on the colour temperature of the HID units. There are also "xenon" headlights that aren't HID, but supposedly whiter than halogen: http://www.autobulbsdirect.co.uk/Xenon-Bulbs.html http://www.autoexpress.co.uk/car-mai...g-xenon-ultima http://reviews.ebay.co.uk/Xenon-bulb...00000000088042 What a joke! The first site offers (among others): H4 OSRAM Night Breaker Plus +90% Limited Edition Just what you want, limited edition!!! -- Rod |
#15
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
In article ,
Alan Braggins wrote: Though http://en.wikipedia.org/wiki/Fluores...licker_Effects says there's also a perceived flicker effect that affects some people as a result of the spiked spectral pattern of the light output, even when using high frequency ballasts. I'd guess that would only occur with very high efficiency single phosphor tubes (horrid white) . Tri-phosphor ones tend to have longer persistence -- *When cheese gets its picture taken, what does it say? * Dave Plowman London SW To e-mail, change noise into sound. |
#16
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
In article ,
Alan Braggins wrote: In article , Dave Plowman (News) wrote: In article , Mike Tomlinson wrote: It's very white, makes halogen look yellowish. Similar to comparing xenon headlights with incandescent on cars - you think incandescent are white until you see both together, e.g. on the motorway. That depends on the colour temperature of the HID units. There are also "xenon" headlights that aren't HID, but supposedly whiter than halogen: Which is why I called them High Intensity Discharge. Those trying to sell snake oil will use any ploy. -- *If only you'd use your powers for good instead of evil. Dave Plowman London SW To e-mail, change noise into sound. |
#17
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for fluorescent tubes?
On Tue, 26 Mar 2013 05:57:04 +0000, Mike Tomlinson
wrote: As others have said, the spectrum isn't wonderful. In a hotel room lit by LED light recently I thought the light quality was very good - close enough to halogen for me to have a squint at the fitting to see what was there - but when I took out my vitamin C tablets, which are bright orange in natural light, they were very washed out under LED light. It made me think that some interestingly-coloured food could come out of kitchens lit by LED. They are actually blue LEDs with a bit of white phosphor on the end. The more phosphor you put in you get the less of the blue and the more white it looks but they get dimmer. A warm white would give nore natural colours than a cool one. |
#18
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
In article ,
Dave N writes: Has anyone here had experience with using LED replacements for fluorescent tubes? They're becoming affordable (1200mm T8 tubes from about £20) and I was thinking of using LED tubes in a standard dual batten lampholder with polycarbonate diffuser fitted, with the ballast circuit bypassed. Seen lots at exhibitions, and some shop fitouts with them. What's the light quality from them like? In particular, I notice the light output seems to be directional, which will no doubt affect the light quality, but does this matter in reality? All the ones I've seen are directional, but in most cases, the light output from fluorescent fittings is directional anyway, and significant light is lost from the far side of the tube, even when reflectors are used. This gets around that to a significant degree. They tend to be available only in the higher colour temperatures (colder bluer whites), because LED efficiency is significantly higher there. (Same is true for fluorescent lamps, but the difference is much smaller.) This means they will only look right at higher lighting levels. The highest efficiency ones have rows of point source LEDs visible which you might find uncomfortable. However, most include a diffuser, which loses some efficiency. Colour rendering - I haven't looked specifically at the LED tubes, but LEDs in general are close to the cheaper fluorescent tubes, but that only works if you get the lumen level high enough to match the colour temperature, and that will mean higher light output may be required than your fluorescents might have produced. TIA, David. -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
#19
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for fluorescent tubes?
In article ,
mcp wrote: They are actually blue LEDs with a bit of white phosphor on the end. The more phosphor you put in you get the less of the blue and the more white it looks but they get dimmer. A warm white would give nore natural colours than a cool one. Last warm white LEDs I tried had even poorer colour rendering than 'white'. And a rather unpleasant greenish hue. Warm white - to me - means a bias towards the red end of the spectrum. -- *I will always cherish the initial misconceptions I had about you Dave Plowman London SW To e-mail, change noise into sound. |
#21
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
On 26 Mar 2013 17:44:31 +0000 (GMT), (Alan
Braggins) wrote: There are also "xenon" headlights that aren't HID, but supposedly whiter than halogen: http://www.autobulbsdirect.co.uk/Xenon-Bulbs.html http://www.autoexpress.co.uk/car-mai...g-xenon-ultima http://reviews.ebay.co.uk/Xenon-bulb...00000000088042 I've been using Osram Silverstar for years and they actually do what's claimed. Not sure about the blue-tinted ********, though. Mostly bull****, I would suspect. |
#22
Posted to uk.d-i-y
|
|||
|
|||
Anyone tried LED replacements for flourescent tubes?
Thanks to everyone for their advice. In the end I've put up some new fluorescent fittings with high frequency ballasts and everyone who's seen them so far admits they can't notice any flicker. Can always bypass the ballast and retrofit LED tubes later.
David. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
T12 tubes, are direct replacements available? | UK diy | |||
OT - Odd behaviour - stereo / flourescent tubes | UK diy | |||
Flourescent tubes - what did I do wrong? | Home Repair | |||
Flourescent tubes, funny thing | Home Repair | |||
flourescent tubes Question | Home Repair |