Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Advice needed for cutting aluminum
I want to start making some custom pieces out of aluminum stock that will
require accurate, clean cutting and don't like the results obtained by using my chop saw. What's the best route? Metal cutting bandsaw? If so, can I get by with a low end unit like the one offered by Harbor Freight for $170? Will it also be useful for future projects using say 16 ga. mild steel, etc? Any input is appreciated! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
AC Advice Needed! | Home Ownership | |||
Advice needed on new basement - sump hole higher than rest of basement | Home Ownership | |||
advice needed: buying a house from owner (without an agent) | Home Ownership | |||
Making offer to buy home - advice needed | Home Ownership |