My father gave me his gold watch, a 25 year old Omega analogue quartz.
It had been lying idle in his drawer with the time-setting pin
disengaged. After re-engaging the pin, the hands began advancing at 4
times the normal rate. After 1 hour it has gained 3 hours. I assume
the crystal is oscillating at a higher overtone, maybe due to a weak
battery.

In any case I now have a watch to match the reverse Dick Smith wall
clock above my desk. Maybe I should start collecting misbehaving
timepieces.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

This might be normal behavior for the watch. You might have engaged a mode
that moves the hands rapidly.

Or not.

Franc Zabkar wrote:
My father gave me his gold watch, a 25 year old Omega analogue quartz.
It had been lying idle in his drawer with the time-setting pin
disengaged. After re-engaging the pin, the hands began advancing at 4
times the normal rate. After 1 hour it has gained 3 hours. I assume
the crystal is oscillating at a higher overtone, maybe due to a weak
battery.

In any case I now have a watch to match the reverse Dick Smith wall
clock above my desk. Maybe I should start collecting misbehaving
timepieces.

- Franc Zabkar

Have you thought of maybe changing the battery ?

geoff

William Sommerwerck wrote:
This might be normal behavior for the watch. You might have engaged a mode
that moves the hands rapidly.

Or not.


That's how you set my Tissot (an Omega brand, I believe).

"Franc Zabkar" wrote in message
...
My father gave me his gold watch, a 25 year old Omega analogue quartz.
It had been lying idle in his drawer with the time-setting pin
disengaged. After re-engaging the pin, the hands began advancing at 4
times the normal rate. After 1 hour it has gained 3 hours. I assume
the crystal is oscillating at a higher overtone, maybe due to a weak
battery.

In any case I now have a watch to match the reverse Dick Smith wall
clock above my desk. Maybe I should start collecting misbehaving
timepieces.

**When I was at tech (well, at the Department of Civil Aviation Training
School, more correctly), a couple of guys decided that some of the electric
(synchronous motor type) clocks required their special attention. They
carefully stripped the clocks apart, removed the motors, then removed the
reverse prevention thingys, reassembled the whole thing with a clock face,
carefully printed in reverse.

It was kinda nice watching the hands of the clock moving backwards.


--
Trevor Wilson
www.rageaudio.com.au

"Spehro Pefhany" wrote in message
...
On Thu, 20 Aug 2009 21:20:20 -0500, the renowned cjt
wrote:

William Sommerwerck wrote:
This might be normal behavior for the watch. You might have engaged a
mode
that moves the hands rapidly.

Or not.


That's how you set my Tissot (an Omega brand, I believe).

I have a watch that detects a quick twist of the crown and steps the
hands around 12 indicated hours (in the appropriate direction) in
about 3 seconds.

4:1 just sounds annoying.


Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers:
http://www.trexon.com
Embedded software/hardware/analog Info for designers:
http://www.speff.com



To speed it up leave it on your wrist when using a hefty spot welder.....

On Thu, 20 Aug 2009 21:20:20 -0500, the renowned cjt
wrote:

William Sommerwerck wrote:
This might be normal behavior for the watch. You might have engaged a mode
that moves the hands rapidly.

Or not.


That's how you set my Tissot (an Omega brand, I believe).

I have a watch that detects a quick twist of the crown and steps the
hands around 12 indicated hours (in the appropriate direction) in
about 3 seconds.

4:1 just sounds annoying.


Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com

Franc Zabkar wrote in message
...
My father gave me his gold watch, a 25 year old Omega analogue quartz.
It had been lying idle in his drawer with the time-setting pin
disengaged. After re-engaging the pin, the hands began advancing at 4
times the normal rate. After 1 hour it has gained 3 hours. I assume
the crystal is oscillating at a higher overtone, maybe due to a weak
battery.

In any case I now have a watch to match the reverse Dick Smith wall
clock above my desk. Maybe I should start collecting misbehaving
timepieces.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

I (in the UK) once had to repair a bedside clock radio that was running hot
and running slow. It was actually made for the USA and 110V / 60Hz that
someone had put a UK plug on the mains cable. Not burnt up running at 240V
but the 50Hz meant it was losing exactly 10 minutes an hour.

My local has a few disguised clocks including a reverse one. I though about
making one with a pointy-tooth eliptical gear and axially sprung loaded
conical pinion so it would run alternately fast and slow each hour.
There is a church near me that has a clock in the tower that is so old that
it has only one hand, other not dropped off, minutes weren't needed prior to
the railways coming in.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

geoff wrote:

Have you thought of maybe changing the battery ?

geoff

My Omega costs $35 a battery change.
They give you a 2 year warranty, and they always run out in 26 months.

Have seriously though of getting a $19.95 throw away watch, and flogging
my engraved gold retirement Omega.

Don...



--
Don McKenzie

Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

Breakout, Prototype, Development, & Robotics Boards:
http://www.dontronics-shop.com/spark...ectronics.html

Coupon Specials:
http://www.dontronics-shop.com/coupon-specials.html

My Omega costs $35 a battery change.
They give you a 2 year warranty, and they
always run out in 26 months.

Have seriously though of getting a $19.95 throw
away watch, and flogging
my engraved gold retirement Omega.

You can purchase tools for opening the back of a watch. I've never paid
anyone to change watch batteries.

Franc Zabkar wrote:
My father gave me his gold watch, a 25 year old Omega analogue quartz.
It had been lying idle in his drawer with the time-setting pin
disengaged. After re-engaging the pin, the hands began advancing at 4
times the normal rate. After 1 hour it has gained 3 hours. I assume
the crystal is oscillating at a higher overtone, maybe due to a weak
battery.

In any case I now have a watch to match the reverse Dick Smith wall
clock above my desk. Maybe I should start collecting misbehaving
timepieces.

- Franc Zabkar


I made a reverse clock years ago with a movement that I got from an
electronics shop, still works and confounds people. I have been trying
to get more of the movements recently but I am having no success.

N_Cook wrote:
Franc Zabkar wrote in message
...
My father gave me his gold watch, a 25 year old Omega analogue quartz.
It had been lying idle in his drawer with the time-setting pin
disengaged. After re-engaging the pin, the hands began advancing at 4
times the normal rate. After 1 hour it has gained 3 hours. I assume
the crystal is oscillating at a higher overtone, maybe due to a weak
battery.

In any case I now have a watch to match the reverse Dick Smith wall
clock above my desk. Maybe I should start collecting misbehaving
timepieces.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

I (in the UK) once had to repair a bedside clock radio that was running hot
and running slow. It was actually made for the USA and 110V / 60Hz that
someone had put a UK plug on the mains cable. Not burnt up running at 240V
but the 50Hz meant it was losing exactly 10 minutes an hour.

My local has a few disguised clocks including a reverse one. I though about
making one with a pointy-tooth eliptical gear and axially sprung loaded
conical pinion so it would run alternately fast and slow each hour.
There is a church near me that has a clock in the tower that is so old that
it has only one hand, other not dropped off, minutes weren't needed prior to
the railways coming in.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/




Some of the old 240 volt ac clocks would go whichever way they were started

In article ,
F Murtz wrote:
I made a reverse clock years ago with a movement that I got from an
electronics shop, still works and confounds people. I have been trying
to get more of the movements recently but I am having no success.

Try looking for a "Barber shop clock movement," which leads to (for
example) this page:
http://www.jknowles.com.au/shop/prod...&cat=261&page=
1

While traditionally used with a mirror image dial, so as to appear
normal and operating in the right direction when viewed in a mirror,
there is naturally no reason why you can't put whatever dial you desire
on the reverse direction movement.

Disclaimer: I have never dealt with the Jonathon Knowles Clock Company,
so have no data to recommend for or against them.

--
Andrew Erickson

"He is no fool who gives what he cannot keep to gain that which he cannot
lose." -- Jim Elliot

F Murtz writes:

Some of the old 240 volt ac clocks would go whichever way they were started

And othres would reverse if you simply flipped the motor stator.

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.

Andrew Erickson wrote:
In article ,
F Murtz wrote:
I made a reverse clock years ago with a movement that I got from an
electronics shop, still works and confounds people. I have been trying
to get more of the movements recently but I am having no success.

Try looking for a "Barber shop clock movement," which leads to (for
example) this page:
http://www.jknowles.com.au/shop/prod...&cat=261&page=
1

While traditionally used with a mirror image dial, so as to appear
normal and operating in the right direction when viewed in a mirror,
there is naturally no reason why you can't put whatever dial you desire
on the reverse direction movement.

Disclaimer: I have never dealt with the Jonathon Knowles Clock Company,
so have no data to recommend for or against them.


Thanks, they are not far away from here

William Sommerwerck wrote:
My Omega costs $35 a battery change.
They give you a 2 year warranty, and they
always run out in 26 months.

Have seriously though of getting a $19.95 throw
away watch, and flogging
my engraved gold retirement Omega.

You can purchase tools for opening the back of a watch. I've never paid
anyone to change watch batteries.

Thanks Bill,

struth, so the cost for an Omega is really in the cost of the tools, not
the battery?

I know when it first went flat, I took it to one of the little arcade
shops that do that sort of thing, and they couldn't get the back off,
and all they managed to do was scratch it.

So I had to take it to Cobblers Plus Watch Works, and they charged $35
and gave a 2 year guarantee.

Took it back 26 months later with the receipt, and they wanted to charge
me the same, so I told them I was going to replace it with a junk watch,
and they immediately dropped the price to $25.

Where do you get the tools, and how much would you expect to pay?

I don't want to be a jeweler, but at $35, when I know the battery could
be purchased $35 a 100 from China, seems a little rich.

Cheers Don...



--
Don McKenzie

Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

Breakout, Prototype, Development, & Robotics Boards:
http://www.dontronics-shop.com/spark...ectronics.html

Coupon Specials:
http://www.dontronics-shop.com/coupon-specials.html

Where do you get the tools, and how much would you expect to pay?

I don't know what the Omega back is like -- it might require some special,
hard-to-obtain tool -- so I can't give a definitive answer.

The most-common backs use either a slotted ring -- which can often be
removed with a pair of chain-nose pliars -- or a press-to-fit back, which is
removed with a "case-back knife".

The latter is simply a knife with a very thin blade. You simply press the
knife into the seam, and twist a bit. (Well, that's the theory. It's
sometimes a bit more difficult, and there is the chance of scracthing the
back.)

These are available from Zantech (http://www.zantechinc.com/store). They
have all kinds of watch-repair equipment and supplies. You'll have fun
browsing the site.


I don't want to be a jeweler, but $35, when I know the battery
could be purchased $35/100 from China, seems a little rich.

You can get batteries even cheaper than that from Zantech and similar
companies.

Any jeweler who charges more than $5 for a battery replacement -- including
the battery -- is gouging. Most batteries cost the dealer less than 25
cents, and replacing one takes less than five minutes. That's a gross profit
of more than $50 an hour. Not bad.

Let it run.
When it has made up the time it missed when it wasn't running it will resume
normal speed.
Not many people know this.

William Sommerwerck wrote:
Where do you get the tools, and how much would you expect to pay?

I don't know what the Omega back is like -- it might require some special,
hard-to-obtain tool -- so I can't give a definitive answer.

yes, it appears that it does.


These are available from Zantech (http://www.zantechinc.com/store). They
have all kinds of watch-repair equipment and supplies. You'll have fun
browsing the site.

thanks William,

gee that seems a very slow site.

Couldn't find anything apart from a knife for opening watches.




I don't want to be a jeweler, but $35, when I know the battery
could be purchased $35/100 from China, seems a little rich.

You can get batteries even cheaper than that from Zantech and similar
companies.

Any jeweler who charges more than $5 for a battery replacement -- including
the battery -- is gouging. Most batteries cost the dealer less than 25
cents, and replacing one takes less than five minutes. That's a gross profit
of more than $50 an hour. Not bad.

Zantech are quoting on their pages $5 to $15.

I wanted a calculator battery a few months back. The common CR-2032.
Tried the little battery-clock shops at the local shopping centre. $9.95
Checked DSE etc, $4 to $5.

Bugger them, bought a bag load from Hong Kong for that sort of money. I
think I got an assortment of 30 batteries for around $10, inc postage.
http://www.wizard-from-oz.com/dx_2.html

Still not sure what to do about my $35 battery problem when it arises in
26 months time. :-)

Cheers Don...





--
Don McKenzie

Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

Breakout, Prototype, Development, & Robotics Boards:
http://www.dontronics-shop.com/spark...ectronics.html

Coupon Specials:
http://www.dontronics-shop.com/coupon-specials.html

"L.A.T." wrote in message
...

Let it run. When it has made up the time it missed
when it wasn't running it will resume normal speed.
Not many people know this.

Very good. I got a chuckle out of that.

Don McKenzie wrote in :

William Sommerwerck wrote:
Where do you get the tools, and how much would you expect to pay?

I don't know what the Omega back is like -- it might require some
special, hard-to-obtain tool -- so I can't give a definitive answer.

yes, it appears that it does.


These are available from Zantech (http://www.zantechinc.com/store).
They have all kinds of watch-repair equipment and supplies. You'll
have fun browsing the site.

thanks William,

gee that seems a very slow site.

Couldn't find anything apart from a knife for opening watches.




I don't want to be a jeweler, but $35, when I know the battery
could be purchased $35/100 from China, seems a little rich.

You can get batteries even cheaper than that from Zantech and similar
companies.

Any jeweler who charges more than $5 for a battery replacement --
including the battery -- is gouging. Most batteries cost the dealer
less than 25 cents, and replacing one takes less than five minutes.
That's a gross profit of more than $50 an hour. Not bad.

Zantech are quoting on their pages $5 to $15.

I wanted a calculator battery a few months back. The common CR-2032.
Tried the little battery-clock shops at the local shopping centre.
$9.95 Checked DSE etc, $4 to $5.

Bugger them, bought a bag load from Hong Kong for that sort of money.
I think I got an assortment of 30 batteries for around $10, inc
postage. http://www.wizard-from-oz.com/dx_2.html

Still not sure what to do about my $35 battery problem when it arises
in 26 months time. :-)

Cheers Don...






Harbor Freight has watch opening tools.

--
Jim Yanik
jyanik
at
kua.net

On Sat, 22 Aug 2009 09:32:48 +1000, Don McKenzie wrote:


I wanted a calculator battery a few months back. The common CR-2032.
Tried the little battery-clock shops at the local shopping centre. $9.95
Checked DSE etc, $4 to $5.

Also keep your eye open at $2.

Bugger them, bought a bag load from Hong Kong for that sort of money. I
think I got an assortment of 30 batteries for around $10, inc postage.
http://www.wizard-from-oz.com/dx_2.html

Also available from $2 shops around here (Our 'city' is infested with
them).

--

Great advances in Debian Linux; post a bug report and get spam in three
days.

Tom wrote:
Don McKenzie wrote:

Still not sure what to do about my $35 battery problem when it arises
in 26 months time. :-)

I've stopped wearing watch about 20 years ago and never missesd it.
Funyy thing I've bought a couple since then (I like nice watch) but they
just sit in a drawer.

Tom

Stopped wearing a watch when mobile phones came out.

William Sommerwerck wrote:
Where do you get the tools, and how much would you expect to pay?

I don't know what the Omega back is like -- it might require some
special, hard-to-obtain tool -- so I can't give a definitive answer.

The most-common backs use either a slotted ring -- which can often be
removed with a pair of chain-nose pliars -- or a press-to-fit back,
which is removed with a "case-back knife".

The latter is simply a knife with a very thin blade. You simply press
the knife into the seam, and twist a bit. (Well, that's the theory.
It's sometimes a bit more difficult, and there is the chance of
scracthing the back.)

These are available from Zantech (http://www.zantechinc.com/store).
They have all kinds of watch-repair equipment and supplies. You'll
have fun browsing the site.


I don't want to be a jeweler, but $35, when I know the battery
could be purchased $35/100 from China, seems a little rich.

You can get batteries even cheaper than that from Zantech and similar
companies.

Any jeweler who charges more than $5 for a battery replacement --
including the battery -- is gouging. Most batteries cost the dealer
less than 25 cents, and replacing one takes less than five minutes.
That's a gross profit of more than $50 an hour. Not bad.

That depends on the type of watch.
If you've got a proper 200m pressure rated watch for example, you have to
(or should) inspect or (more usually) replace the o-ring, grease it up
again, and do a full pressure test after it's all done.

If you don't like changing batteries, Casio (and probably others) have
watches rated for a 10 year battery life.

Dave.
--
---------------------------------------------
Check out my Electronics Engineering Video Blog & Podcast:
http://www.alternatezone.com/eevblog/

F Murtz wrote:
Tom wrote:
Don McKenzie wrote:

Still not sure what to do about my $35 battery problem when it
arises in 26 months time. :-)

I've stopped wearing watch about 20 years ago and never missesd it.
Funyy thing I've bought a couple since then (I like nice watch) but
they just sit in a drawer.

Tom

Stopped wearing a watch when mobile phones came out.

I still wear a wrist watch for the same reason I still have a real
calculator on my desk instead of using the PC.

Dave.
--
---------------------------------------------
Check out my Electronics Engineering Video Blog & Podcast:
http://www.alternatezone.com/eevblog/

If the watch is old enough it may require a mercury battery. Since the
mercury battery is of a different voltage than what currently replaces
it the watch will need calibrated. I own a 1965 Bulova Accutron that
was designed for a mercury battery. I found a jewler that could
replace the battery and adjust the watch for $20. Had some kind of
device that listened to the watch to determine how to adjust it.

I believe there are non-mercury 1.35V batteries, or 1.5V batteries with
dropping diodes.

The Accutron tuning fork vibrates faster at a higher voltage. (The user
manual warns that the watch will run slightly fast with a new battery, until
the voltage has stabilized. It takes a couple of days.) I don't know if the
adjustment has enough range to cover a 10% voltage increase.

I still have my father's Accutron. I ought to get it out and wear it. Very
stylishly retro.

I don't wear a watch too often but when I do it's a Timex Indiglo
Ironman. It's light and waterproof plus has a molded rubber band
so it's not a burden.

I bought one of those when they first came out. Still works, but the buttons
are corroded.

On Sat, 22 Aug 2009 14:24:16 -0400, Meat Plow wrote:
On Sat, 22 Aug 2009 08:41:28 -0700, "William Sommerwerck"
wrote:

I don't wear a watch too often but when I do it's a Timex Indiglo
Ironman. It's light and waterproof plus has a molded rubber band
so it's not a burden.

I bought one of those when they first came out. Still works, but the buttons
are corroded.


Also have an older Ironman that you can program via a PC. It does it
by reading your monitor flash in patterns.

That great if you don't mind never upgrading from the particular microsoft
windows major release for which the watch driver was written.
Just keep a windows 95 machine around dedicated to programming the watch.

I don't know the model of your watch. Omega watches are very expensive
and considered very high end. It would pay to service the watch. Some
models had problems with their timing module. You can send the watch
to an authorized Omega service center to have it repaired. If you go
to the Omega web site, they can assist you to find a service rep
nearest to you. These high end quartz watches require mechanical
service about once every 10 years.

An Omega watch of any kind is a high quality instrument for life. Its
long term accuracy will far exceed any off the shelf lower end watch.
All of their watches meet very strict standards and would recognized
to navigate a ship or an aircraft. If you try to buy one new from a
certified dealer (not something from the net that is not authorized),
their most basic quartz watches in a stainless steel case can start at
about $1800 US and up. If it is a chronometer type watch, they can
start at over $2500 for a basic type.

I have been wearing a mechanical (windup) Omega Speedmaster Mark II
Professional watch since 1974. I was 25 years old when I bought it. I
get it cleaned and maintained by the Omega service people every 4
years. It is mechanical, and over the long term it is more accurate
than any of the other newer watches that I have.


Jerry G.



On Aug 20, 8:29*pm, Franc Zabkar wrote:
My father gave me his gold watch, a 25 year old Omega analogue quartz.
It had been lying idle in his drawer with the time-setting pin
disengaged. After re-engaging the pin, the hands began advancing at 4
times the normal rate. After 1 hour it has gained 3 hours. I assume
the crystal is oscillating at a higher overtone, maybe due to a weak
battery.

In any case I now have a watch to match the reverse Dick Smith wall
clock above my desk. Maybe I should start collecting misbehaving
timepieces.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

Also have an older Ironman that you can program via a PC.
It does it by reading your monitor flash in patterns.

It's a lot easier to store needed data on a PDA. No, a PDA can't be strapped
to your wrist, but they're hardly huge.

An Omega watch of any kind is a high quality instrument for life. Its
long term accuracy will far exceed any off the shelf lower end watch.

I've owned "cheap" watches that were accurate to within a few seconds a
month.

This is obviously a matter of taste, but I've always found Omega's case
design fussy and unattractive. Excuse me, that's Rolex. Sorry.

On Fri, 21 Aug 2009 17:51:34 +1000, Don McKenzie wrote:

geoff wrote:

Have you thought of maybe changing the battery ?

geoff

My Omega costs $35 a battery change.
They give you a 2 year warranty, and they always run out in 26 months.

Have seriously though of getting a $19.95 throw away watch, and flogging
my engraved gold retirement Omega.

I have an Omega *real* analog auto-wind (no battery) from the early sixties
that still runs like a swiss clock (cough!). It has a "one-piece-case" i.e. no
rear access - probably part of the 100m immersion rating. It needs a special
tool which apparently flexes the glass/perspec/acrylic front to remove it.

Recently had it serviced to assure ongoing watertightness, new stem seals etc
and the front polished to remove scratches. Probably good for another forty
years - will certainly outlast me.

Also use as my daily drive a Casio which runs about five years between battery
replacements (has barometric altimeter etc). But the replacement cost of
necessity includes seals and pressure testing, so it runs about $40 a time.

I have an Omega *real* analog auto-wind (no battery) from the early
sixties
that still runs like a swiss clock (cough!). It has a "one-piece-case"
i.e. no
rear access -- probably part of the 100m immersion rating. It needs a
special
tool which apparently flexes the glass/perspec/acrylic front to remove it.

If it's a "good" watch, it has a mineral cover, not plastic. Some watches
have undoped sapphire (aluminum oxide) covers.

Don McKenzie wrote:
geoff wrote:

Have you thought of maybe changing the battery ?

geoff

My Omega costs $35 a battery change.
They give you a 2 year warranty, and they always run out in 26 months.

And ?

Have seriously though of getting a $19.95 throw away watch, and
flogging my engraved gold retirement Omega.


I'll give you $35 dollars for it - same cost as the battery you can't
justify investing in !

geoff

Don McKenzie wrote:

So I had to take it to Cobblers Plus Watch Works, and they charged $35
and gave a 2 year guarantee.

Took it back 26 months later with the receipt, and they wanted to
charge me the same, so I told them I was going to replace it with a
junk watch, and they immediately dropped the price to $25.

Where do you get the tools, and how much would you expect to pay?

I don't want to be a jeweler, but at $35, when I know the battery
could be purchased $35 a 100 from China, seems a little rich.

Last time mine cost $12.50. Was something like $35 if I wanted it pressure
tested to it's rated depth.

geoff

L.A.T. wrote:
Let it run.
When it has made up the time it missed when it wasn't running it will
resume normal speed.
Not many people know this.


Juist leave it. It will be spot on twice a day.


geoff

rebel wrote:
On Fri, 21 Aug 2009 17:51:34 +1000, Don McKenzie wrote:

geoff wrote:

Have you thought of maybe changing the battery ?

geoff

My Omega costs $35 a battery change.
They give you a 2 year warranty, and they always run out in 26
months.

Have seriously though of getting a $19.95 throw away watch, and
flogging my engraved gold retirement Omega.

I have an Omega *real* analog auto-wind (no battery) from the early
sixties that still runs like a swiss clock (cough!).

I have a real Omega analogue mechanical watch that I need to wind every day
by hand. But I use my electronic one because it runs just fine for over 2
years at a time without needing to wind anything.


geoff

Don McKenzie wrote:
Best I pass on that one. A gold engraved $2000 retirement watch, will
end up with the grand kids, when I fall off the perch.

They can then sell it for $35. :-)\

Please pass them my address !

Actually a worthwhile investment in a battery, as it would likely seize up
in not working for a long period.


geoff

geoff wrote:
Don McKenzie wrote:
geoff wrote:

Have you thought of maybe changing the battery ?

geoff
My Omega costs $35 a battery change.
They give you a 2 year warranty, and they always run out in 26 months.

And ?

Have seriously though of getting a $19.95 throw away watch, and
flogging my engraved gold retirement Omega.


I'll give you $35 dollars for it - same cost as the battery you can't
justify investing in !

geoff

:-)

thanks Geoff, caught me out!

Best I pass on that one. A gold engraved $2000 retirement watch, will
end up with the grand kids, when I fall off the perch.

They can then sell it for $35. :-)

Don...





--
Don McKenzie

Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

Breakout, Prototype, Development, & Robotics Boards:
http://www.dontronics-shop.com/spark...ectronics.html

Coupon Specials:
http://www.dontronics-shop.com/coupon-specials.html

On Sun, 23 Aug 2009 04:47:24 -0700, "William Sommerwerck"
wrote:

I have an Omega *real* analog auto-wind (no battery) from the early
sixties
that still runs like a swiss clock (cough!). It has a "one-piece-case"
i.e. no
rear access -- probably part of the 100m immersion rating. It needs a
special
tool which apparently flexes the glass/perspec/acrylic front to remove it.

If it's a "good" watch, it has a mineral cover, not plastic. Some watches
have undoped sapphire (aluminum oxide) covers.

It's a *good* one. That's why I was vague/multi-biguous about the material, as
it obviously has to flex for removal.