Home |
Search |
Today's Posts |
|
Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Lever in the Way
I have a Jet 1442, which I dearly love (my fourth lathe and glad of the
other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? Thanks Deb |
#2
|
|||
|
|||
Dr. Deb wrote:
I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? Thanks Deb How is the lever mounted on the shaft? Can you reinstall it at a different angle? -- Gerald Ross Cochran, GA Know what I hate? I hate rhetorical questions! ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#3
|
|||
|
|||
Don't be so quick to take the blame for someone else's mistake. The guy who
designed that lathe probably never turned on one............. Barry "Dr. Deb" wrote in message ... I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? Thanks Deb |
#4
|
|||
|
|||
I have had a 1442 for about a month and noticeed the same thing. Your not
alone. I too was curious if I was missing something. -Stvee "Dr. Deb" wrote in message ... I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? Thanks Deb |
#5
|
|||
|
|||
Buy a chuck. Then you will not need so many cuts from this side of the
lathe. Derek "Dr. Deb" wrote in message ... I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? Thanks Deb |
#6
|
|||
|
|||
"Dr. Deb" wrote in message ... I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? I just gave up on my old beast and began turning everything toward the headstock. It's a great way of doing things, especially if you're right-handed. Of course, with mine, it was because the banjo couldn't get a toolrest far enough around a bowl. For spindle stuff, you might want to consider the pin jaws. They'll grip square stock or smaller round a bit farther from the headstock. I use 'em a lot for knobs, icecicles for ornaments, and such. Or start with longer stuff. http://personalpages.tds.net/~upgeor...ugh%20Page.htm |
#7
|
|||
|
|||
"Gerald Ross" wrote in message Dr. Deb wrote: I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? Thanks Deb How is the lever mounted on the shaft? Can you reinstall it at a different angle? Yes. The speed control lever mounts to the headstock with a splined shaft. It can be placed in virtually any position. But a more reasonable alternative is to use a chuck or a longer waste block. The ergonomics of the 1442 are not ideal, but can be worked around in every case. Max |
#8
|
|||
|
|||
Dr. Deb wrote:
I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? I have a Delta 1440, with about the same "problem". If you're finished the inside it is time to reverse the bowl using, Cole Jaws, a vacuum chuck, or a jam block and tail stock so you can work on the bottom - all the way to the center. I don't know how you could put the "finishing touches" on the bottom with it still in a chuck, or on a waste block or faceplate. |
#9
|
|||
|
|||
"Mike" wrote in message Dr. Deb wrote: I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? I have a Delta 1440, with about the same "problem". If you're finished the inside it is time to reverse the bowl using, Cole Jaws, a vacuum chuck, or a jam block and tail stock so you can work on the bottom - all the way to the center. I don't know how you could put the "finishing touches" on the bottom with it still in a chuck, or on a waste block or faceplate. I assumed she was referring to finishing that part of the bowl adjacent to the bottom, rather than the area under the waste block. Max |
#10
|
|||
|
|||
Gerald Ross wrote:
Dr. Deb wrote: I have a Jet 1442, which I dearly love (my fourth lathe and glad of the other stops along the way - made me appreciate this one more), with a Reeves drive. My problem is when I use the highest two speeds the lever gets in the way when I try to turn near the headstock. I would assume this is because of an error in my turning technique. But when I am cutting a bowl and putting the finishing touches on the bottom I have to work around the lever. Yesterday, I was tuning some bobbins for my daughter's spinning wheel and found the lever in the way when using the skew to clean up the center portion of the bobbin. Any hints? Thanks Deb How is the lever mounted on the shaft? Can you reinstall it at a different angle? No, it has a detent setup that makes turning it around impossible. Deb |
#11
|
|||
|
|||
"Dr. Deb" wrote in message How is the lever mounted on the shaft? Can you reinstall it at a different angle? No, it has a detent setup that makes turning it around impossible. Actually the whole apparatus, including the detent plate, can be turned upside down, making the arc of the lever downward rather than upward. Not sure I'd recommend that, however, as it would be cumbersome to use. But it would get the handle out of the way. Max |
#12
|
|||
|
|||
Maxprop wrote:
"Dr. Deb" wrote in message How is the lever mounted on the shaft? Can you reinstall it at a different angle? No, it has a detent setup that makes turning it around impossible. Actually the whole apparatus, including the detent plate, can be turned upside down, making the arc of the lever downward rather than upward. Not sure I'd recommend that, however, as it would be cumbersome to use. But it would get the handle out of the way. Max On looking at pictures of this lathe on the net, One listed by a site in England shows the handle pointing to the left, ones on US sites seem to show it pointing to the right. My Delta only turns about 50 degrees, but have never seen a Jet in person so not sure about it. The detent and lever can be rotated 180 degrees on mine also, but it would be sticking to the right. -- Gerald Ross Cochran, GA Know what I hate? I hate rhetorical questions! ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#13
|
|||
|
|||
"Gerald Ross" wrote: (clip)One listed by a site in England shows the handle pointing to the left, ones on US sites seem to show it pointing to the right. (clip)^^^^^^^^^^^^^^^^^ That's because they drive on the opposite side of the street. |
#14
|
|||
|
|||
Maxprop wrote:
"Dr. Deb" wrote in message How is the lever mounted on the shaft? Can you reinstall it at a different angle? No, it has a detent setup that makes turning it around impossible. Actually the whole apparatus, including the detent plate, can be turned upside down, making the arc of the lever downward rather than upward. Not sure I'd recommend that, however, as it would be cumbersome to use. But it would get the handle out of the way. Max On looking at pictures of this lathe on the net, One listed by a site in England shows the handle pointing to the left, ones on US sites seem to show it pointing to the right. My Delta only turns about 50 degrees, but have never seen a Jet in person so not sure about it. The detent and lever can be rotated 180 degrees on mine also, but it would be sticking to the right. -- Gerald Ross Cochran, GA Know what I hate? I hate rhetorical questions! ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bent iron and lever cap that won't clamp, any hope? | Woodworking | |||
Pop Up Waste Lever Leak | UK diy | |||
Dial Test Indicator Pointers | Metalworking | |||
Delta mobile base extension lever hits bottom shelf? | Woodworking | |||
Reversing leadscrew on small lathe | Metalworking |