Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
I work in a number of mediums from metal and wood to clay and paints but what ever I am doing it is always SMALL. In 1:12 scale to be precise. I am also a stickler for accuracy and detail to achieve realism. To this end I am looking for ANY jigs or holders etc that would help me with making (and reproducing) small items. I can totally take a jig from woodworking and adapt it to the items I make in metal so that's not an issue...no need to point to wood magazine jigs as I have collected a variety of those types already.
In particular I am trying to modify all my tools whether full size or mini, to adapt to my Byrnes Miniaturists Table saw mitre table attachment, for accuracy. right now I'm trying to figure out how to attach it to my delta disc and mini band sander (on the disc side) effectively...Ive removed the disc housing since I made a set of removable discs in a variety of grits so I can quickly swap them out rather than peel off paper that is only partially used up! If anyone is interested in those mods to use for your full sized items or as a sharpening system..I'm willing to share! Thanks for any replies and for the new add to this group. sincerely, Jackie |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Friday, May 5, 2017 at 8:56:52 PM UTC-4, Jackie Trades wrote:
I work in a number of mediums from metal and wood to clay and paints but what ever I am doing it is always SMALL. In 1:12 scale to be precise. I am also a stickler for accuracy and detail to achieve realism. To this end I am looking for ANY jigs or holders etc that would help me with making (and reproducing) small items. I can totally take a jig from woodworking and adapt it to the items I make in metal so that's not an issue...no need to point to wood magazine jigs as I have collected a variety of those types already. In particular I am trying to modify all my tools whether full size or mini, to adapt to my Byrnes Miniaturists Table saw mitre table attachment, for accuracy. right now I'm trying to figure out how to attach it to my delta disc and mini band sander (on the disc side) effectively...Ive removed the disc housing since I made a set of removable discs in a variety of grits so I can quickly swap them out rather than peel off paper that is only partially used up! If anyone is interested in those mods to use for your full sized items or as a sharpening system..I'm willing to share! Thanks for any replies and for the new add to this group. sincerely, Jackie We'd love to see photos of your work, Jackie. Do you have any to show us? -- Ed Huntress |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
"Jackie Trades" wrote in message
... I work in a number of mediums from metal and wood to clay and paints but what ever I am doing it is always SMALL. In 1:12 scale to be precise. I am also a stickler for accuracy and detail to achieve realism. To this end I am looking for ANY jigs or holders etc that would help me with making (and reproducing) small items. I can totally take a jig from woodworking and adapt it to the items I make in metal so that's not an issue...no need to point to wood magazine jigs as I have collected a variety of those types already. In particular I am trying to modify all my tools whether full size or mini, to adapt to my Byrnes Miniaturists Table saw mitre table attachment, for accuracy. right now I'm trying to figure out how to attach it to my delta disc and mini band sander (on the disc side) effectively...Ive removed the disc housing since I made a set of removable discs in a variety of grits so I can quickly swap them out rather than peel off paper that is only partially used up! If anyone is interested in those mods to use for your full sized items or as a sharpening system..I'm willing to share! Thanks for any replies and for the new add to this group. sincerely, Jackie ======================= http://littlemachineshop.com/info/minimill_compare.php |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Friday, May 5, 2017 at 8:56:52 PM UTC-4, Jackie Trades wrote:
To this end I am looking for ANY jigs or holders etc that would help me with making (and reproducing) small items. oup. sincerely, Jackie Yesterday I was at a tag sale that had a bunch of tools. And I found a V clamp. It is a small vacuum clamp that uses compressed air and a venturi to hold things. It is about 8 inches by 8 inches, but can be used to clamp smaller things. www.vac-clamp.com/€Ž Have not tried it, but did buy it. Made in Australia ,but available from some U.S. places. Dan |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Sat, 6 May 2017 19:30:14 -0700 (PDT), "
wrote: On Friday, May 5, 2017 at 8:56:52 PM UTC-4, Jackie Trades wrote: To this end I am looking for ANY jigs or holders etc that would help me with making (and reproducing) small items. oup. sincerely, Jackie Yesterday I was at a tag sale that had a bunch of tools. And I found a V clamp. It is a small vacuum clamp that uses compressed air and a venturi to hold things. It is about 8 inches by 8 inches, but can be used to clamp smaller things. www.vac-clamp.com/? Have not tried it, but did buy it. Made in Australia ,but available from some U.S. places. Dan Rather quiet vacuum clamp. I wonder where they are exhausting the air flow? Gunner --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Sunday, May 7, 2017 at 6:58:37 AM UTC-4, Gunner Asch wrote:
On Sat, 6 May 2017 19:30:14 -0700 (PDT), " wrote: On Friday, May 5, 2017 at 8:56:52 PM UTC-4, Jackie Trades wrote: To this end I am looking for ANY jigs or holders etc that would help me with making (and reproducing) small items. oup. sincerely, Jackie Yesterday I was at a tag sale that had a bunch of tools. And I found a V clamp. It is a small vacuum clamp that uses compressed air and a venturi to hold things. It is about 8 inches by 8 inches, but can be used to clamp smaller things. www.vac-clamp.com/? Have not tried it, but did buy it. Made in Australia ,but available from some U.S. places. Dan Rather quiet vacuum clamp. I wonder where they are exhausting the air flow? Gunner --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus And with all that woodworking dust, I'm assuming there's a filter on the inlet to the venturi? That will need cleaning probably often. Garrett |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Sun, 7 May 2017 06:20:50 -0700 (PDT), Garrett Fulton
wrote: On Sunday, May 7, 2017 at 6:58:37 AM UTC-4, Gunner Asch wrote: On Sat, 6 May 2017 19:30:14 -0700 (PDT), " wrote: On Friday, May 5, 2017 at 8:56:52 PM UTC-4, Jackie Trades wrote: To this end I am looking for ANY jigs or holders etc that would help me with making (and reproducing) small items. oup. sincerely, Jackie Yesterday I was at a tag sale that had a bunch of tools. And I found a V clamp. It is a small vacuum clamp that uses compressed air and a venturi to hold things. It is about 8 inches by 8 inches, but can be used to clamp smaller things. www.vac-clamp.com/? Have not tried it, but did buy it. Made in Australia ,but available from some U.S. places. Dan Rather quiet vacuum clamp. I wonder where they are exhausting the air flow? Gunner --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus And with all that woodworking dust, I'm assuming there's a filter on the inlet to the venturi? That will need cleaning probably often. Garrett Indeed. Id love to see one up close and personal. |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Sunday, May 7, 2017 at 9:20:52 AM UTC-4, Garrett Fulton wrote:
And with all that woodworking dust, I'm assuming there's a filter on the inlet to the venturi? That will need cleaning probably often. Garrett Why do you think that? In use there is essentially no flow. Dan |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Sunday, May 7, 2017 at 5:08:29 PM UTC-4, wrote:
On Sunday, May 7, 2017 at 9:20:52 AM UTC-4, Garrett Fulton wrote: And with all that woodworking dust, I'm assuming there's a filter on the inlet to the venturi? That will need cleaning probably often. Garrett Why do you think that? In use there is essentially no flow. Dan It's going to evacuate the air below the piece being held. Then there will be essentially no flow into the venturi. If a guy keeps the thing well cleaned of dust every time he uses it, it probably wouldn't clog. I'm a little skeptical about it. |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On 08-May-17 8:49 AM, Garrett Fulton wrote:
On Sunday, May 7, 2017 at 5:08:29 PM UTC-4, wrote: On Sunday, May 7, 2017 at 9:20:52 AM UTC-4, Garrett Fulton wrote: And with all that woodworking dust, I'm assuming there's a filter on the inlet to the venturi? That will need cleaning probably often. Garrett Why do you think that? In use there is essentially no flow. Dan It's going to evacuate the air below the piece being held. Then there will be essentially no flow into the venturi. If a guy keeps the thing well cleaned of dust every time he uses it, it probably wouldn't clog. I'm a little skeptical about it. Have a look at 4:30 in the video where he fills it full of sawdust https://youtu.be/pN5RqoPCCJQ |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Monday, May 8, 2017 at 12:29:18 AM UTC-4, BM2335 wrote:
On 08-May-17 8:49 AM, Garrett Fulton wrote: On Sunday, May 7, 2017 at 5:08:29 PM UTC-4, wrote: On Sunday, May 7, 2017 at 9:20:52 AM UTC-4, Garrett Fulton wrote: And with all that woodworking dust, I'm assuming there's a filter on the inlet to the venturi? That will need cleaning probably often. Garrett Why do you think that? In use there is essentially no flow. Dan It's going to evacuate the air below the piece being held. Then there will be essentially no flow into the venturi. If a guy keeps the thing well cleaned of dust every time he uses it, it probably wouldn't clog. I'm a little skeptical about it. Have a look at 4:30 in the video where he fills it full of sawdust https://youtu.be/pN5RqoPCCJQ You're right. I didn't watch the entire video. I'm impressed. |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Sunday, May 7, 2017 at 2:41:21 PM UTC-4, Gunner Asch wrote:
Indeed. Id love to see one up close and personal. I have way too many projects, but I am thinking a vacuum clamp would be handy on a drill press. I am always drilling things without clamping them. So a vacuum clamp mounted on the drill press might be nice. Or maybe most of the stuff I drill is too small or badly shaped for a vacuum clamp. Dan |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Mon, 8 May 2017 05:37:47 -0700 (PDT), Garrett Fulton
wrote: On Monday, May 8, 2017 at 12:29:18 AM UTC-4, BM2335 wrote: On 08-May-17 8:49 AM, Garrett Fulton wrote: On Sunday, May 7, 2017 at 5:08:29 PM UTC-4, wrote: On Sunday, May 7, 2017 at 9:20:52 AM UTC-4, Garrett Fulton wrote: And with all that woodworking dust, I'm assuming there's a filter on the inlet to the venturi? That will need cleaning probably often. Garrett Why do you think that? In use there is essentially no flow. Dan It's going to evacuate the air below the piece being held. Then there will be essentially no flow into the venturi. If a guy keeps the thing well cleaned of dust every time he uses it, it probably wouldn't clog. I'm a little skeptical about it. Have a look at 4:30 in the video where he fills it full of sawdust https://youtu.be/pN5RqoPCCJQ You're right. I didn't watch the entire video. I'm impressed. Both the $60 Lee Valley job (shown) and the $565 by Festool (of course) are quieter than the cheapie Japa-/Taiwa-/Chi-nese jobs I saw decades ago. But it's still close to 5cfm just to run 'em. And they have to be run to hold vacuum. 12psi? Strange figure. -- Obstacles are those frightful things you see when you take your eyes off your goal. --Henry Ford |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
Jigs for scale (or just tiny) projects
On Mon, 8 May 2017 14:14:14 -0700 (PDT), "
wrote: On Sunday, May 7, 2017 at 2:41:21 PM UTC-4, Gunner Asch wrote: Indeed. Id love to see one up close and personal. I have way too many projects, but I am thinking a vacuum clamp would be handy on a drill press. I am always drilling things without clamping them. So a vacuum clamp mounted on the drill press might be nice. Or maybe most of the stuff I drill is too small or badly shaped for a vacuum clamp. Dan Given that you would be dealing with rotational torque rather than linear torgue..I wonder how well it would hold. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
[OT] Cool tiny tiny PC | UK diy | |||
Jigs | Woodworking | |||
Tiny, tiny metalwork - chip re-soldering | Metalworking | |||
The Definitive Chord & Scale Bible - Literally EVERY chord and scale! | Metalworking |