Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
No power ...
and my generator ain't working . Well , the power is back on now , but I
still don't know why the generator isn't putting out . Motor starts and runs normally , but I'm not getting any power . Last time I checked it (couple of months ago) everything was working fine but this morning at 3:00 it wasn't .... I'll be opening up the control panel and taking the end cover off the generator unit itself to see if there's anything I can see , maybe something on the armature slip ring or something , maybe a loose wire . I'm open to suggestions ... -- Snag |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Halfords switching power supply to power a Ring Automotive RAC610 12V Analogue (Tyre) Compressor | UK diy | |||
Does an iPad or high power Android phone *need* a USB 3.0 extensionfor full power charging? | Electronics Repair | |||
PC Speakers - no power supply but I have a drawer full of power supplies! | UK diy | |||
HP/Agilent E3632A programmable power supply has power up failure (solution) | Electronics Repair | |||
Running 120v small power tool on UK 230v power (with pics) | Electronics Repair |