Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
need ideas for feeding a trommel sifter
Hi,
Here's a motorized compost trommel sifter I built: http://steveandlizthompson.shutterfly.com/ It works great, but after loading two yards through it with a shovel, I looked at my tractor with a FEL, and thought that there must be an easier way! But I'm stuck. How to create a system that is loaded by the FEL to feed the sifter? Conveyor belt, corkscrew in a trough, modified small grain silo? I'm a hobby welder with no industrial experience, and I don't know where to look for ideas. I've got a pvc pipe, 6 feet long, 18 inches in diameter, 1/2 inch walls, that I could rip to create a trough. I even thought of modifying a post hole auger, but it's not long enough. Any ideas feasible for a DIYer would be appreciated. Thanks, Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Building a compost sifter | Home Repair | |||
Soil sifter | UK diy | |||
Bar feeding? | Metalworking | |||
Feeding tv to 7 rooms ? | UK diy | |||
Care and feeding of a RAS? | Woodworking |