Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Removing a Gas Line?
If it were me I would cap the pipe where it starts and remove as much as
possible. -- Joseph E. Meehan 26 + 6 = 1 It's Irish Math "P.E." wrote in message m... OK Gas Line experts. This is part of a continuing project on my house. I recently removed the fireplace in my house and now have a gas line to deal with . Since this wont be used again,putting in a entertainment center, what do I do with the gas pipe? There is a valve at the wall that was used to shut off the fire, but is there some building code that states that this entire line will need to be removed from the wall? As far as I can tell, this line comes from my furnace/AC condenser in the attic. Unfortunately , there is no shut off valve there that could shut off the supply down through the wall. Will a gas line tech need to either: A: Completely remove the unnecessary pipe? or B: Simply add a shutoff valve just past the furnace that would stop the supply down to the fireplace area? Im down here in Texas if that makes a difference to building code.. Thanks. |
#2
|
|||
|
|||
Removing a Gas Line?
Either remove the valve, or add a cap or plug at end of the valve. I would
remove the valve and cap the line. Jim Mc Namara Houston, Texas "P.E." wrote in message m... OK Gas Line experts. This is part of a continuing project on my house. I recently removed the fireplace in my house and now have a gas line to deal with . Since this wont be used again,putting in a entertainment center, what do I do with the gas pipe? There is a valve at the wall that was used to shut off the fire, but is there some building code that states that this entire line will need to be removed from the wall? As far as I can tell, this line comes from my furnace/AC condenser in the attic. Unfortunately , there is no shut off valve there that could shut off the supply down through the wall. Will a gas line tech need to either: A: Completely remove the unnecessary pipe? or B: Simply add a shutoff valve just past the furnace that would stop the supply down to the fireplace area? Im down here in Texas if that makes a difference to building code.. Thanks. |
#3
|
|||
|
|||
Removing a Gas Line?
"P.E." wrote in message m... OK Gas Line experts. This is part of a continuing project on my house. I recently removed the fireplace in my house and now have a gas line to deal with . Since this wont be used again,putting in a entertainment center, what do I do with the gas pipe? There is a valve at the wall that was used to shut off the fire, but is there some building code that states that this entire line will need to be removed from the wall? Pipes are stubbed in all the time for future use, so there is no problem leaving the pipe. There is a problem leaving the valve though. Turn off the gas, remove the valve, and then cap the end of the pipe using pipe dope on the pipe threads that is especially made for gas lines. The pipe end cap you'll need will most likely be 3/8 or 1/2. These are inside pipe dia. Tom J |
#4
|
|||
|
|||
Removing a Gas Line?
Its going to depend on your local inpectors.
Here, you need to find the location that the pipe leaves the main branch, cap it off, and remove the line that is now dead, or cap both ends. "P.E." wrote in message m... OK Gas Line experts. This is part of a continuing project on my house. I recently removed the fireplace in my house and now have a gas line to deal with . Since this wont be used again,putting in a entertainment center, what do I do with the gas pipe? There is a valve at the wall that was used to shut off the fire, but is there some building code that states that this entire line will need to be removed from the wall? As far as I can tell, this line comes from my furnace/AC condenser in the attic. Unfortunately , there is no shut off valve there that could shut off the supply down through the wall. Will a gas line tech need to either: A: Completely remove the unnecessary pipe? or B: Simply add a shutoff valve just past the furnace that would stop the supply down to the fireplace area? Im down here in Texas if that makes a difference to building code.. Thanks. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Line out jack | Electronics | |||
McCulloch Strimmer Line | UK diy | |||
Miter saw laser line adapter | Woodworking | |||
Removing Caulk | Woodworking | |||
Need Some Advice on phone line Problems | Home Repair |