Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
removing keyless chuck
Hi everyone. I am trying to remove the keyless chuck from my 19.2 volt
craftsman cordless drill. I have followed the directions in the manual, which said to insert a 5/16 inch or larger hex key (I used 3/8") and tap sharply in a counterclockwise direction with a mallet. It then said that it should be removable by hand. After doing this for 45 minutes, it still won't come off. I even used some Kroil where the chuck and spindle meet, no luck. Are there any tricks that I haven't used yet to try and get the chuck off? Thanks. Eric |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Craftsman drill keyless chuck removal | Home Repair | |||
How to remove a keyless chuck | Home Repair | |||
Keyless Chuck for Drill Press | Woodworking | |||
Tapping with keyless chuck on lathe | Metalworking | |||
Teknatool Titan Chuck draft review | Woodturning |