I accidentally cut off the 24 pin ATX power supply connector because I
thought I was going to use the power supply for another purpose, but
that turned out not to be the case. I want to reinstall back into the
desktop, but I have a question: since all the red, yellow, orange, and
black wires were going to be combined (for greater current handling in
non-PC use), I am wondering if I could just combine the same color
cutoff wires from the connector with the ones coming from the power
supply? Would sure save a lot of extra soldering. For example, in case
I'm not clear, can I combine all the orange wires from the supply and
all the orange wires from the connector and solder together? Thanks in
advance.

On 2021/01/26 3:23 p.m., Jon I wrote:
I accidentally cut off the 24 pin ATX power supply connector because I
thought I was going to use the power supply for another purpose, but
that turned out not to be the case.Â* I want to reinstall back into the
desktop, but I have a question:Â* since all the red, yellow, orange, and
black wires were going to be combined (for greater current handling in
non-PC use), I am wondering if I could just combine the same color
cutoff wires from the connector with the ones coming from the power
supply?Â* Would sure save a lot of extra soldering.Â* For example, in case
I'm not clear, can I combine all the orange wires from the supply and
all the orange wires from the connector and solder together?Â* Thanks in
advance.

Yes.

I'd wire each wire separately but I'm anal. However you could blob all
the same colours together and then insulate carefully.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

On 27/01/2021 01:37, John Robertson wrote:
On 2021/01/26 3:23 p.m., Jon I wrote:
I accidentally cut off the 24 pin ATX power supply connector because I
thought I was going to use the power supply for another purpose, but
that turned out not to be the case.Â* I want to reinstall back into the
desktop, but I have a question:Â* since all the red, yellow, orange,
and black wires were going to be combined (for greater current
handling in non-PC use), I am wondering if I could just combine the
same color cutoff wires from the connector with the ones coming from
the power supply?Â* Would sure save a lot of extra soldering.Â* For
example, in case I'm not clear, can I combine all the orange wires
from the supply and all the orange wires from the connector and solder
together?Â* Thanks in advance.

Yes.

I'd wire each wire separately but I'm anal. However you could blob all
the same colours together and then insulate carefully.

In commoning up the individual wires, ye might need thicker cables to
handle the current.

I'd rewire each separately using similar wire to the original. Take ya
time and use heat shrink, leaded solder and a good soldering iron. It's
not a difficult job to be considering short cuts.

--
Adrian C

On 2021/01/26 10:35 p.m., Adrian Caspersz wrote:
On 27/01/2021 01:37, John Robertson wrote:
On 2021/01/26 3:23 p.m., Jon I wrote:
I accidentally cut off the 24 pin ATX power supply connector because
I thought I was going to use the power supply for another purpose,
but that turned out not to be the case.Â* I want to reinstall back
into the desktop, but I have a question:Â* since all the red, yellow,
orange, and black wires were going to be combined (for greater
current handling in non-PC use), I am wondering if I could just
combine the same color cutoff wires from the connector with the ones
coming from the power supply?Â* Would sure save a lot of extra
soldering.Â* For example, in case I'm not clear, can I combine all the
orange wires from the supply and all the orange wires from the
connector and solder together?Â* Thanks in advance.

Yes.

I'd wire each wire separately but I'm anal. However you could blob all
the same colours together and then insulate carefully.

In commoning up the individual wires, ye might need thicker cables to
handle the current.

I'd rewire each separately using similar wire to the original. Take ya
time and use heat shrink, leaded solder and a good soldering iron. It's
not a difficult job to be considering short cuts.


I interpreted the OP as saying he would join all the wires of the same
colour in a blob and glom the other wires to the same blob. Ugly, but it
would work. Not professional at all. However folks do like short cuts
and that was what I offered.
I would be too embarrassed to actually do that blob thingy though...

John ;-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

On Wed, 27 Jan 2021 14:30:21 -0800, John Robertson wrote:
On 2021/01/26 10:35 p.m., Adrian Caspersz wrote:
On 27/01/2021 01:37, John Robertson wrote:
On 2021/01/26 3:23 p.m., Jon I wrote:
I accidentally cut off the 24 pin ATX power supply connector because
I thought I was going to use the power supply for another purpose,
but that turned out not to be the case.Â* I want to reinstall back
into the desktop, but I have a question:Â* since all the red, yellow,
orange, and black wires were going to be combined (for greater
current handling in non-PC use), I am wondering if I could just
combine the same color cutoff wires from the connector with the ones
coming from the power supply?Â* Would sure save a lot of extra
soldering.Â* For example, in case I'm not clear, can I combine all the
orange wires from the supply and all the orange wires from the
connector and solder together?Â* Thanks in advance.

Yes.

I'd wire each wire separately but I'm anal. However you could blob all
the same colours together and then insulate carefully.

In commoning up the individual wires, ye might need thicker cables to
handle the current.

I'd rewire each separately using similar wire to the original. Take ya
time and use heat shrink, leaded solder and a good soldering iron. It's
not a difficult job to be considering short cuts.


I interpreted the OP as saying he would join all the wires of the same
colour in a blob and glom the other wires to the same blob. Ugly, but it
would work. Not professional at all. However folks do like short cuts
and that was what I offered.
I would be too embarrassed to actually do that blob thingy though...

The OP should stagger the cuts for each set of common wires.
To attempt them side-by-side would put all the "blobs" side-by-side.

I am reminded of the idiot in the UASF that was told to replace a 36
conductor plug in a F-102's radar equipment bay. He cut the cable straight
across about 2" from the old connector. Then, after soldering new
"stub" wires into the new plug, he proceeded to splice it all back onto
the cut cable. He somehow succeded, but the plane's crew chief could not
close the cover over the equipment bay -- due to the now some-6" thick bable.

(Anybody remember dzus fasteners?)

Jonesy
--
Marvin L Jones | Marvin | W3DHJ.net | linux
38.238N 104.547W | @ jonz.net | Jonesy | FreeBSD
* Killfiling google & XXXXbanter.com: jonz.net/ng.htm

On 2021/01/27 5:35 p.m., Allodoxaphobia wrote:
On Wed, 27 Jan 2021 14:30:21 -0800, John Robertson wrote:
On 2021/01/26 10:35 p.m., Adrian Caspersz wrote:
On 27/01/2021 01:37, John Robertson wrote:
On 2021/01/26 3:23 p.m., Jon I wrote:
I accidentally cut off the 24 pin ATX power supply connector because
I thought I was going to use the power supply for another purpose,
but that turned out not to be the case.Â* I want to reinstall back
into the desktop, but I have a question:Â* since all the red, yellow,
orange, and black wires were going to be combined (for greater
current handling in non-PC use), I am wondering if I could just
combine the same color cutoff wires from the connector with the ones
coming from the power supply?Â* Would sure save a lot of extra
soldering.Â* For example, in case I'm not clear, can I combine all the
orange wires from the supply and all the orange wires from the
connector and solder together?Â* Thanks in advance.
...

The OP should stagger the cuts for each set of common wires.
To attempt them side-by-side would put all the "blobs" side-by-side.

Excellent point!


I am reminded of the idiot in the UASF that was told to replace a 36
conductor plug in a F-102's radar equipment bay. He cut the cable straight
across about 2" from the old connector. Then, after soldering new
"stub" wires into the new plug, he proceeded to splice it all back onto
the cut cable. He somehow succeded, but the plane's crew chief could not
close the cover over the equipment bay -- due to the now some-6" thick bable.

(Anybody remember dzus fasteners?)

I always wondered what they were called - we use them in old jukeboxes -
thanks!

https://www.wagaero.com/hardware/fas...-fastener.html


Jonesy


Muchos gracias! (this is your second official language, eh?)

John :-#)#

On Thu, 28 Jan 2021 10:02:06 -0800, John Robertson wrote:

Muchos gracias! (this is your second official language, eh?)

errr, uuuuh, no, My second official language is IBM Mainframe Assembler.
After that comes German, then PHP. :-)

Jonesy

On Wednesday, January 27, 2021 at 8:35:19 PM UTC-5, Allodoxaphobia wrote:
I am reminded of the idiot in the UASF that was told to replace a 36
conductor plug in a F-102's radar equipment bay. He cut the cable straight
across about 2" from the old connector. Then, after soldering new
"stub" wires into the new plug, he proceeded to splice it all back onto
the cut cable. He somehow succeded, but the plane's crew chief could not
close the cover over the equipment bay -- due to the now some-6" thick bable.

You could argue he was given insufficiently clear instructions on his task. Though a real tech should have figured it out.

In a factory where I worked there was an OSHA potential violation identified, the 6 mill roll stands did not have individual identification placards.

I wrote an order to the most recent hi use the engraver and make 6 placards labeled Mill Roll Stand #1 - #6.

I knew what I wanted but he didn't. Next time I checked all 6 mill roll stands had identical labels, Mill Roll Stand #1 - #6.

I will admit that I have also cut a cable too close to a connection and quickly regretted it.

"But you know what I mean."

No, I know what you said (wrote). I am still trying to discern what you mean.

"Can I ......?"

Answer A: I should certainly hope so!
Answer B: I do not know. Can you?

Peter Wieck
Melrose Park, PA

Jon I wrote:
I accidentally cut off the 24 pin ATX power supply connector because I
thought I was going to use the power supply for another purpose, but
that turned out not to be the case. I want to reinstall back into the
desktop, but I have a question: since all the red, yellow, orange, and
black wires were going to be combined (for greater current handling in
non-PC use), I am wondering if I could just combine the same color
cutoff wires from the connector with the ones coming from the power
supply? Would sure save a lot of extra soldering. For example, in case
I'm not clear, can I combine all the orange wires from the supply and
all the orange wires from the connector and solder together? Thanks in
advance.

You could do this, but you'll quite a bit of flexibility if you combine
colors into big fat connections covered in heatshrink or tape. Your
connector may not fit in the case as the cables and patches are too stiff
or in the wrong place etc.

On 29/01/2021 13:57, Tim R wrote:


I will admit that I have also cut a cable too close to a connection and quickly regretted it.


Any wire cut to length is too short

AT

On Fri, 26 Feb 2021 18:11:16 +0000, Abandoned_Trolley wrote:
On 29/01/2021 13:57, Tim R wrote:

I will admit that I have also cut a cable too close to a connection and quickly regretted it.

Any wire cut to length is too short

If a wire has one end, then it has another.

Not that hard, for the most part the wires of the same color re interchangeable.

https://www.smpspowersupply.com/conn...atx_pinout.GIF

might help.

Note if you ever want to try that again you need a couple of things. First the green wire on pin 11 or 177 needs to be grounded to turn it on. Then to keep it on you must load the 5 volt about an amp, but you might get by with less. I power resistor 4.7 ohms would do bt it has to be at least 5 watts, and it WILL warm up so you have to kinda insulate it. Unless you want to use a big ass 20 watt.

On Friday, February 26, 2021 at 1:11:20 PM UTC-5, Abandoned_Trolley wrote:
On 29/01/2021 13:57, Tim R wrote:


I will admit that I have also cut a cable too close to a connection and quickly regretted it.

Any wire cut to length is too short

Cut it too long, the boss might gripe. Cut it too short, you're fired.

On 2/28/21 7:09 AM, bruce bowser wrote:
Cut it too long, the boss might gripe. Cut it too short, you're fired.

On one of the install jobs I was on, we had just pulled a 24 pair fiber
optic cable. The installer connected 12 pairs to the devices already in
the cabinet.
The proceeded to cut off the remaining end flush with the box.
"They were in the way."


--
"I am a river to my people."
Jeff-1.0
WA6FWi
http:foxsmercantile.com