Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
|
LinkBack | Thread Tools | Display Modes |
#41
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
My suggestion was not meant to shorten the cue, only to see about
finding an appropriate diameter tube or pipe that equals the existing OD and turn down the diameter of the tip enough to install it. I agree that time spent is only worth it if this is something special. -- ~~~~~~~~~~~~~~~~~~~~ DanG Keep the whole world singing . . . "Bill" wrote in message ... DanG wrote: If the is cue is something special, you might try turning down the tip and using a metal ferrule (copper pipe? or other) where this one is splitting. Install with epoxy to take up any gaps. Gasp!!! IMO, If it's really good 2-piece cue, I suggest you buy a new shaft for it. If you paid less than $50 for it, then I think it's time for an upgrade. No good cue's were designed to be made shorter anyway (the same goes for fishing rods that get crushed in the car door). Like Lew said about computers being a tool--replace it with one that works and enjoy your game. Bill |
#42
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
Hoppe?
Yep. Thank you. Lew William Frederick Hoppe was a true billiard champion. You don't hear much about him or Greenleaf and those guys anymore. Another great player, IMHO, is one I affectionately call "Wille" but his real name is Nick Varner. A masterful Kentucky boy. Why do I call him Wille? Well it's because he always reminds me of Gene Wilder playing Wilie Wonka, having almost the hair style and body size. `Casper |
#43
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
DanG wrote:
If the is cue is something special, you might try turning down the tip and using a metal ferrule (copper pipe? or other) where this one is splitting. Install with epoxy to take up any gaps. Gasp!!! IMO, If it's really good 2-piece cue, I suggest you buy a new shaft for it. If you paid less than $50 for it, then I think it's time for an upgrade. No good cue's were designed to be made shorter anyway (the same goes for fishing rods that get crushed in the car door). Like Lew said about computers being a tool--replace it with one that works and enjoy your game. Bill |
#44
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
"DanG" wrote in -
september.org: My suggestion was not meant to shorten the cue, only to see about finding an appropriate diameter tube or pipe that equals the existing OD and turn down the diameter of the tip enough to install it. I agree that time spent is only worth it if this is something special. Nothing special about the cue, except I like the feel. I know it's useless, but I'll keep playing with it here and there to see how it goes. Maybe I'll learn something useful... if not it's still fun to see the end go flying after a shot. (Same reason we'd keep playing with a baseball with missing seams.) Puckdropper -- Never teach your apprentice everything you know. |
#45
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
DanG wrote:
If the is cue is something special, you might try turning down the tip and using a metal ferrule (copper pipe? or other) where this one is splitting. Install with epoxy to take up any gaps. If you know anything about squirt and deflection, you would not use a metal ferrule. You want the tip (last 6 inches) as light as possible. -- Jack Fight Socialism.... Buy a Ford! http://jbstein.com |
#46
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
"Jack Stein" wrote in message
... DanG wrote: If the is cue is something special, you might try turning down the tip and using a metal ferrule (copper pipe? or other) where this one is splitting. Install with epoxy to take up any gaps. I don't see why a plastic or bone ferrule wouldn't do the same job. |
#47
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
Bob La Londe wrote:
"Jack Stein" wrote in message ... DanG wrote: If the is cue is something special, you might try turning down the tip and using a metal ferrule (copper pipe? or other) where this one is splitting. Install with epoxy to take up any gaps. I don't see why a plastic or bone ferrule wouldn't do the same job. Recall too that a good installation of such a ferrule involves putting on an over-sized one and taking it down with a lathe. With a new tip, it would typically probably cost $30-40 to have that done. It sounds as if the original tenon is long gone (broken off), so a bit more work is required. If I owned a lathe, I would try to do it. Otherwise I'd be cue shopping (hardly an unpleasant affair). I don't recall exactly where the line in the sand is now, but I think anything over a certain amount, say $150, is all for show. Bill |
#48
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
"Bill" wrote in message
... Bob La Londe wrote: "Jack Stein" wrote in message ... DanG wrote: If the is cue is something special, you might try turning down the tip and using a metal ferrule (copper pipe? or other) where this one is splitting. Install with epoxy to take up any gaps. I don't see why a plastic or bone ferrule wouldn't do the same job. Recall too that a good installation of such a ferrule involves putting on an over-sized one and taking it down with a lathe. With a new tip, it would typically probably cost $30-40 to have that done. It sounds as if the original tenon is long gone (broken off), so a bit more work is required. If I owned a lathe, I would try to do it. Otherwise I'd be cue shopping (hardly an unpleasant affair). I don't recall exactly where the line in the sand is now, but I think anything over a certain amount, say $150, is all for show. Bill Been a long time since I looked at pool cues, but the last time I looked the low end McDermott was about $117. You could get a Diamond for about $80, and a good quality Players for about $50. Never could bring myself to spring for a McDermott, but I had a Diamond, still have a Players, and had a number of the good old $39.95 Dufferin (carefully hand selected of course) cues over the years. Flash back time: I'll never forget the poor guy who challenged me to basic $5 a game 8 ball once. I wasn't good, but I was better than him. After the 4th game he said it had to be my fancy pool cue, so I handed it to him covered my eyes and randomly grabbed a bar stick off the wall, and told him to put his money down. (I turned away from him so he wouldn't see the expression on my face when I discovered what I would be shooting with. LOL. I was thrilled it still had decent leather.) He took me up on it. I got one of those perfect one in a hundred spreads on the break and ran the table on him. He must have enjoyed the show because he was grinning when he handed me his fin. You just gotta love a good sport. |
#49
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
"Bill" wrote in message
... OTOH, I've seen broom handles that would make better cues than they have in many places. Just depends what you need. Ages ago the "Our Place Bar" used to have a mop and broom tournament on Wednesday nights. You could bring any mop or broom you wanted or select one of those in the bar. The only rule was it had to be a complete unmodified factory made and commercially sold mop or broom with everything in tact. If a rag mop it had to have a head on it etc etc. The bar put up the prizes which were 3 ribeye steaks for for 1st, and 2 for 2nd. I found the key was to find one you could shoot with that didn't spin around too much on you, and you didn't whack yourself in the ribs on a long stroke. I took home some of those steaks a few times. |
#50
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
Bob La Londe wrote:
"Bill" wrote in message ... OTOH, I've seen broom handles that would make better cues than they have in many places. Just depends what you need. Ages ago the "Our Place Bar" used to have a mop and broom tournament on Wednesday nights. You could bring any mop or broom you wanted or select one of those in the bar. The only rule was it had to be a complete unmodified factory made and commercially sold mop or broom with everything in tact. If a rag mop it had to have a head on it etc etc. The bar put up the prizes which were 3 ribeye steaks for for 1st, and 2 for 2nd. I found the key was to find one you could shoot with that didn't spin around too much on you, and you didn't whack yourself in the ribs on a long stroke. I took home some of those steaks a few times. Reminds me of the Swiffer Sweeper advertisements: e.g. http://www.youtube.com/watch?v=hKZg_...eature=related I'm scared to think what I might have come home with. : ) Bill |
#51
Posted to rec.woodworking
|
|||
|
|||
Pool Cue
Bob La Londe wrote:
"Bill" wrote in message ... Bob La Londe wrote: "Jack Stein" wrote in message ... DanG wrote: If the is cue is something special, you might try turning down the tip and using a metal ferrule (copper pipe? or other) where this one is splitting. Install with epoxy to take up any gaps. I don't see why a plastic or bone ferrule wouldn't do the same job. Recall too that a good installation of such a ferrule involves putting on an over-sized one and taking it down with a lathe. With a new tip, it would typically probably cost $30-40 to have that done. It sounds as if the original tenon is long gone (broken off), so a bit more work is required. If I owned a lathe, I would try to do it. Otherwise I'd be cue shopping (hardly an unpleasant affair). I don't recall exactly where the line in the sand is now, but I think anything over a certain amount, say $150, is all for show. Bill Been a long time since I looked at pool cues, but the last time I looked the low end McDermott was about $117. You could get a Diamond for about $80, and a good quality Players for about $50. Never could bring myself to spring for a McDermott, but I had a Diamond, still have a Players, and had a number of the good old $39.95 Dufferin (carefully hand selected of course) cues over the years. Quite a collection of them here. http://www.billiardwarehouse.com/cue..._pool_cues.htm |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
solar pool cover for kidney-shaped pool | Home Repair | |||
My climbing pool robot cleaner is getting stuck on my pool stairs | Home Repair | |||
Please recommend the Best Automatic Pool cleaner for my pool - I provided details of my pool | Home Ownership | |||
Please recommend the Best Automatic Pool cleaner for my pool - I provided details of my pool | Home Repair | |||
Dirty water back in to pool from cartridge pool filter | Home Repair |