Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 21
Default Sawing big wood by hand

Hi!

I have a very few years on wood working, doing this as hobby, which I
really enjoy. I read the groups from time to time, and now that I've
some doubts/thinkings, I would like to post it!

A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..

I've the chance to take this piece to a school near home, that has a
big wood working workshop, and they let me use the scroll saw, and
other machines.. but I love hand tools, and also I would like to be
self-sufficient, so I'm thinking in using a good hand saw (which I
would need to buy).

I've never dimensioned roguh stock using hand tools yet... how long can
it take to make a single straing cut over the 2 meters long? It's
something reasonable, or I'm going to end all sweat looking at the sky
laying on my yard?

I'm asking about the estimated time you think it would take, to have a
parameter for checking if everything goes well, if the saw is well
sharpened, the technique is good, etc..

Thanks a lot!!!
Mariano

  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 99
Default Sawing big wood by hand

nautilus wrote:
Hi!

I have a very few years on wood working, doing this as hobby, which I
really enjoy. I read the groups from time to time, and now that I've
some doubts/thinkings, I would like to post it!

A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..

I've the chance to take this piece to a school near home, that has a
big wood working workshop, and they let me use the scroll saw, and
other machines.. but I love hand tools, and also I would like to be
self-sufficient, so I'm thinking in using a good hand saw (which I
would need to buy).

I've never dimensioned roguh stock using hand tools yet... how long can
it take to make a single straing cut over the 2 meters long? It's
something reasonable, or I'm going to end all sweat looking at the sky
laying on my yard?

I'm asking about the estimated time you think it would take, to have a
parameter for checking if everything goes well, if the saw is well
sharpened, the technique is good, etc..

Thanks a lot!!!
Mariano

As in finishing, practice on scrap, or your sticks may become scrap. Let
the saw do the work. If it won't cut easily and cleanly it may not be
sharp enough.
http://www.brendlers.net/oldtools/handsaws/handsaws.htm
I thought Jeff had a link on his page but I can't seem to find it.
http://www.amgron.clara.net/
Joe
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 180
Default Sawing big wood by hand


nautilus wrote:

I'm asking about the estimated time you think it would take,


It would take me under "an afternoon", and about a gallon of tea. I'd
use either my Disston rip saw (look for the ones with the thumb hole
handle) for ripping thin stock, or more likely my Japanese anahiki.
http://codesmiths.com/shed/things/bo...e/chestnut.htm

I'd really like a _big_ anahiki. Nice saw for ripping whole logs, I use
it a lot.

As it's cedar it might not take much time at all. OTOH there's a 6' log
of 2' diameter _hornbeam_ in the car at the moment, waiting to be split
and crosscut into bowl blanks. I'm not looking forward to that,
hornbeam is tough going.

  #4   Report Post  
Posted to rec.woodworking
Len Len is offline
external usenet poster
 
Posts: 65
Default Sawing big wood by hand


"Joe Gorman" wrote in message
...
nautilus wrote:
Hi!

I have a very few years on wood working, doing this as hobby,

which I
really enjoy. I read the groups from time to time, and now

that I've
some doubts/thinkings, I would like to post it!

A few days ago I bought some cedar from a lumber yard, to

finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two

pieces of
this size.. and I need to get some 3x3x2meters "sticks"..

I've the chance to take this piece to a school near home,

that has a
big wood working workshop, and they let me use the scroll

saw, and
other machines.. but I love hand tools, and also I would like

to be
self-sufficient, so I'm thinking in using a good hand saw

(which I
would need to buy).

I've never dimensioned roguh stock using hand tools yet...

how long can
it take to make a single straing cut over the 2 meters long?

It's
something reasonable, or I'm going to end all sweat looking

at the sky
laying on my yard?

I'm asking about the estimated time you think it would take,

to have a
parameter for checking if everything goes well, if the saw is

well
sharpened, the technique is good, etc..

Thanks a lot!!!
Mariano

As in finishing, practice on scrap, or your sticks may become

scrap. Let
the saw do the work. If it won't cut easily and cleanly it may

not be
sharp enough.
http://www.brendlers.net/oldtools/handsaws/handsaws.htm
I thought Jeff had a link on his page but I can't seem to find

it.
http://www.amgron.clara.net/
Joe


You might also want to consider getting yourself a Japanese Ryoba
saw for this work. It has cross-cut teeth on one side of the
blade, rip teeth on the other, and makes a very small kerf.

You can see a picture at:

http://www.leevalley.com/wood/page.a...96&cat=1,42884

Personally, I prefer the traditional type handles.

The main benefit of these saws is they cut on the pull stroke,
keeping the blade under tension during the cut. This minimizes
binding, and makes it very easy to maintain a straight cut
compared to a typical push type rip saw. They also cut much
faster, even in relatively thick wood.

Since I put together my collection of Japanese hand saws, except
to wipe the dust off, I rarely touch my old push type rip and
crosscut saws.

Len



  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 276
Default Sawing big wood by hand

nautilus wrote:

Hi!

I have a very few years on wood working, doing this as hobby, which I
really enjoy. I read the groups from time to time, and now that I've
some doubts/thinkings, I would like to post it!

A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..

I've the chance to take this piece to a school near home, that has a
big wood working workshop, and they let me use the scroll saw, and
other machines.. but I love hand tools, and also I would like to be
self-sufficient, so I'm thinking in using a good hand saw (which I
would need to buy).

I've never dimensioned roguh stock using hand tools yet... how long can
it take to make a single straing cut over the 2 meters long? It's
something reasonable, or I'm going to end all sweat looking at the sky
laying on my yard?

I'm asking about the estimated time you think it would take, to have a
parameter for checking if everything goes well, if the saw is well
sharpened, the technique is good, etc..


However you do it remember to cut it large to allow for stock removal
when planing it. If you intend to plane a 2m long piece by hand make
sure firstly you have a solid bench to clamp it to and you have at least
a no7 jointer plane, anything shorter and you will end up veneer before
you get it flat. And as Joe says, practise on scrap.

Look at the cutting process as working your fitness up for the planing
;-)

Peter

--
Add my middle initial to email me. It has become attached to a country


  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 38
Default Sawing big wood by hand

On the plus side, you're working with cedar, not maple. If we're talking
about the same kind of cedar that we use up here (western Canada) to make
decks and fences, it's the softest, most easily hand-worked wood I've used.
But I know there's other kinds of cedar, so who can tell?

But I still think I wouldn't want to be doing that by hand. You may not end
up looking up at the sky in your yard, but you may end up having to have
your arm surgically re-attached after it falls off. If it does fall off,
make sure you have a cooler full of ice to put it in, and don't get blood on
the wood. Spoils the finish, doncha know? Or make sure you bleed
consistently over all the wood.



Clint

"nautilus" wrote in message
ups.com...
Hi!

I have a very few years on wood working, doing this as hobby, which I
really enjoy. I read the groups from time to time, and now that I've
some doubts/thinkings, I would like to post it!

A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..

I've the chance to take this piece to a school near home, that has a
big wood working workshop, and they let me use the scroll saw, and
other machines.. but I love hand tools, and also I would like to be
self-sufficient, so I'm thinking in using a good hand saw (which I
would need to buy).

I've never dimensioned roguh stock using hand tools yet... how long can
it take to make a single straing cut over the 2 meters long? It's
something reasonable, or I'm going to end all sweat looking at the sky
laying on my yard?

I'm asking about the estimated time you think it would take, to have a
parameter for checking if everything goes well, if the saw is well
sharpened, the technique is good, etc..

Thanks a lot!!!
Mariano



  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,532
Default Sawing big wood by hand

Len wrote:

The main benefit of these saws is they cut on the pull stroke,
keeping the blade under tension during the cut. This minimizes
binding, and makes it very easy to maintain a straight cut
compared to a typical push type rip saw. They also cut much
faster, even in relatively thick wood.


Actually, for the same amount of wood removal, they don't cut any faster at
all. But, because they cut on the pull stroke, the blade is much thinner and
only removes about half as much wood for a given length of cut.

--
It's turtles, all the way down
  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,185
Default Sawing big wood by hand

nautilus wrote:

A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..

I love hand tools, and also I would like to be
self-sufficient, so I'm thinking in using a good hand saw (which I
would need to buy).


You might want to consider a bowsaw. Very thin blade, but it's held in
tension like a hacksaw or bucksaw so there is almost no danger of
damaging the blade if it gets pinched in the wood like can happen with a
japanese saw.

Tage Frid was partial to these.

http://www.taunton.com/finewoodworking/pages/w00123.asp


Chris
  #9   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 255
Default Sawing big wood by hand


nautilus wrote:
Hi!

I have a very few years on wood working, doing this as hobby, which I
really enjoy. I read the groups from time to time, and now that I've
some doubts/thinkings, I would like to post it!

A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..

I've the chance to take this piece to a school near home, that has a
big wood working workshop, and they let me use the scroll saw, and
other machines.. but I love hand tools, and also I would like to be
self-sufficient, so I'm thinking in using a good hand saw (which I
would need to buy).

I've never dimensioned roguh stock using hand tools yet... how long can
it take to make a single straing cut over the 2 meters long? It's
something reasonable, or I'm going to end all sweat looking at the sky
laying on my yard?

I'm asking about the estimated time you think it would take, to have a
parameter for checking if everything goes well, if the saw is well
sharpened, the technique is good, etc..

Thanks a lot!!!
Mariano


In cedar, that cut should take you no more than 10 minutes. Provided
you use a rip saw, not a crosscut.

John Martin

  #10   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 168
Default Sawing big wood by hand


nautilus wrote:
A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..
(snip)... so I'm thinking in using a good hand saw (which I
would need to buy).


If I made a cut like that with a hand saw, it would look like
vandalism.

The cheesiest skilsaw I've ever owned could do a long rip better than I
could with any hand saw. I love hand saws for small work though.



  #11   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 21
Default Sawing big wood by hand

Hi there!

Thanks so much for all the answers! Finally, I did it! I have a 24"
crosscut saw, and it took me about 1:15 to do the cut... and I'm happy
with that. My fingers are shaking a bit while I'm writing, but at least
I didn't end up looking at the sky on my yard!!! :-D

Actually.. it was not on my yard.. but instead in my small balcony. I
live in the 4th floor, in an aparment in down town Buenos Aires. As I
said I love hand tools, but besides that, this is my only choice for
now, if I would like to start sawing from rough lumber.. For planning I
have a small bench, mounted on my kitchen, for shaving with the no 7!

The cedar is southamerican cedar, from north Argentina. It's a soft
wood.. and now you have me thinking about the maple thing... I think
I'll probably need to try that someday ;-)

Thanks to everyone!
Mariano

  #12   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 38
Default Sawing big wood by hand

Better watch out. You do that enough times, and your upper body will get
lopsided and you'll walk funny leaning to the right.

Congrats on that anyway. You still won't catch me trying that. I've got a
non-sweating reputation to maintain.

On the plus side, I'm sure the sky in Buenos Aires would be wonderful to
look at, as you lay on your back on your balcony. I'd just rather do it
because I drank too many wobbly-pops.

Clint

"nautilus" wrote in message
ups.com...
Hi there!

Thanks so much for all the answers! Finally, I did it! I have a 24"
crosscut saw, and it took me about 1:15 to do the cut... and I'm happy
with that. My fingers are shaking a bit while I'm writing, but at least
I didn't end up looking at the sky on my yard!!! :-D

Actually.. it was not on my yard.. but instead in my small balcony. I
live in the 4th floor, in an aparment in down town Buenos Aires. As I
said I love hand tools, but besides that, this is my only choice for
now, if I would like to start sawing from rough lumber.. For planning I
have a small bench, mounted on my kitchen, for shaving with the no 7!

The cedar is southamerican cedar, from north Argentina. It's a soft
wood.. and now you have me thinking about the maple thing... I think
I'll probably need to try that someday ;-)

Thanks to everyone!
Mariano



  #13   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 399
Default Sawing big wood by hand

boorite wrote:
nautilus wrote:
A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..
(snip)... so I'm thinking in using a good hand saw (which I
would need to buy).


If I made a cut like that with a hand saw, it would look like
vandalism.

The cheesiest skilsaw I've ever owned could do a long rip better than I
could with any hand saw. I love hand saws for small work though.


You an me both, but I can use a handsaw fairly
well. My dad was a carpenter (also a teacher and
a chemist) and he could saw a straight line, keep
the saw perfectly vertical, and do it quickly.
Never saw (no pun intended) him bend a handsaw
blade even a little. It takes practice to
maintain a stance where you arm is going up and
down without any sideways movement.

The OP needs to get a good rip saw (?8 tooth?).
Just as information, my dad would have ripped that
piece of wood from end to end in about 5 minutes
(assuming western red cedar) and the piece ripped
off would have been square.
  #14   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 21
Default Sawing big wood by hand

Wow! 5 minutes?? Darn.. I must be doing something wrong then..

I mean, I thought that I knew how to use a hand saw, and the cutted
piece was square and good, with an acceptable clean cut. But it
definitely took me more than 5 minutes... Are we talking about the same
dimensions? I was working with a piece of 3" x 8" x 7 feets long.. and
the cut was over the 7 feets, to get a 3" x 3" x 7 feet.

The hand saw was brand new, Crosscut, 8 points.. It's such a big
difference with a rip saw, maybe 5 points?

I end up really sweat, and had to make 4 or 5 pauses to get some air!

Thanks!
Mariano


George E. Cawthon ha escrito:

boorite wrote:
nautilus wrote:
A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..
(snip)... so I'm thinking in using a good hand saw (which I
would need to buy).


If I made a cut like that with a hand saw, it would look like
vandalism.

The cheesiest skilsaw I've ever owned could do a long rip better than I
could with any hand saw. I love hand saws for small work though.


You an me both, but I can use a handsaw fairly
well. My dad was a carpenter (also a teacher and
a chemist) and he could saw a straight line, keep
the saw perfectly vertical, and do it quickly.
Never saw (no pun intended) him bend a handsaw
blade even a little. It takes practice to
maintain a stance where you arm is going up and
down without any sideways movement.

The OP needs to get a good rip saw (?8 tooth?).
Just as information, my dad would have ripped that
piece of wood from end to end in about 5 minutes
(assuming western red cedar) and the piece ripped
off would have been square.


  #15   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 255
Default Sawing big wood by hand


nautilus wrote:
Wow! 5 minutes?? Darn.. I must be doing something wrong then..

I mean, I thought that I knew how to use a hand saw, and the cutted
piece was square and good, with an acceptable clean cut. But it
definitely took me more than 5 minutes... Are we talking about the same
dimensions? I was working with a piece of 3" x 8" x 7 feets long.. and
the cut was over the 7 feets, to get a 3" x 3" x 7 feet.

The hand saw was brand new, Crosscut, 8 points.. It's such a big
difference with a rip saw, maybe 5 points?

I end up really sweat, and had to make 4 or 5 pauses to get some air!

Thanks!
Mariano


There is a big difference. Very big. It's not the number of points -
although the rip saw is typically coarser - but the shape and filing
angle of the teeth. The rip saw is not well suited for cross cutting,
but for ripping it is just the ticket.

5 minutes might be a tad fast, but I'll stick by the 10. And I've
figured in a few breathers.

Send some of those cedar planks up this way and I'll let you know!

John Martin



  #16   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 931
Default Sawing big wood by hand

"Clint" wrote in
news:UUxUg.49707$E67.23240@clgrps13:

Better watch out. You do that enough times, and your upper body will
get lopsided and you'll walk funny leaning to the right.


Just use your left arm for sawing. That way, with a little added control
you can get lots of "Wood money" playing Major League Baseball. :-)

*snip*

Puckdropper
--
Wise is the man who attempts to answer his question before asking it.

To email me directly, send a message to puckdropper (at) fastmail.fm
  #17   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 142
Default Sawing big wood by hand

On Tue, 03 Oct 2006 20:09:46 GMT, "George E. Cawthon"
wrote:

boorite wrote:
nautilus wrote:
A few days ago I bought some cedar from a lumber yard, to finish a
project in which I'm working ok. The stock measures 3 inch of
thickness, 9 inch width, and about 2 meters long. I've two pieces of
this size.. and I need to get some 3x3x2meters "sticks"..
(snip)... so I'm thinking in using a good hand saw (which I
would need to buy).


If I made a cut like that with a hand saw, it would look like
vandalism.

The cheesiest skilsaw I've ever owned could do a long rip better than I
could with any hand saw. I love hand saws for small work though.


You an me both, but I can use a handsaw fairly
well. My dad was a carpenter (also a teacher and
a chemist) and he could saw a straight line, keep
the saw perfectly vertical, and do it quickly.
Never saw (no pun intended) him bend a handsaw
blade even a little. It takes practice to
maintain a stance where you arm is going up and
down without any sideways movement.

The OP needs to get a good rip saw (?8 tooth?).
Just as information, my dad would have ripped that
piece of wood from end to end in about 5 minutes
(assuming western red cedar) and the piece ripped
off would have been square.


Ha! I remember when I was a kid watching my dad rip 1x12 pine boards
with a rip handsaw (10', 16', I don't remember but they weren't
little short boards) and finish with a straighter, more square end
product than I could possibly do with a power circular saw without a
sawboard. A quick swipe with an old wooden coffin plane (which was my
grandfather's and I now own) and those rips were as straight and
smooth as anything that comes off my tablesaw and jointer (yeah, a
combination of him being good at it and me being poor at it). Although
his profession during my lifetime was as an elementary school
principal, he was a carpenter before WWII and on most job sites power
tools were not allowed by unions as the union felt they would
eliminate jobs. You had to have your own tools and learned to use
them and keep them sharp and in good repair.

Dave Hall
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
### micro-FAQ on wood # 68 P van Rijckevorsel Woodworking 0 June 24th 06 04:22 PM
### micro-FAQ on wood # 66 P van Rijckevorsel Woodworking 0 May 27th 06 11:38 AM
### micro-FAQ on wood # 50 P van Rijckevorsel Woodworking 0 October 27th 05 05:57 PM
Steam Bending Lumber - Any Good Sites Big John Woodworking 2 December 26th 04 06:30 PM
FAQ - Steambending gregg Woodworking 0 December 26th 04 02:06 PM


All times are GMT +1. The time now is 08:48 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"