Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
My first mailorder big machine is showing up tomorrow at 3pm from abf
freight and amazon. It's a 300lb sander. I know the truck has a lift gate. And the lady at the trucking company said that they would wheel it into the garage for me. I expect things to be uneventful. Can anyone suggest anything to watch out for? Should I tip this guy? brian |
#2
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
"brianlanning" wrote in message oups.com... My first mailorder big machine is showing up tomorrow at 3pm from abf freight and amazon. It's a 300lb sander. I know the truck has a lift gate. And the lady at the trucking company said that they would wheel it into the garage for me. I expect things to be uneventful. Can anyone suggest anything to watch out for? Should I tip this guy? brian I always tip delivery guys like this Brian. Let your conscience be your guide. What else to watch out for... make sure you know where you want it. It's hard to get the guy with the big pallet jack to turn around and come back after he's 3 miles down the road. Do take all the packing off and really thoroughly inspect it for damage before the trucker leaves. If you have to submit a claim, it's so much easier to do if you can document damages on the bill of lading. If you find damage, call Amazon while the trucker is there so you can be sure to get all of the details right. Check the shock watch if one is installed on the box. -- -Mike- |
#3
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
On 2006-01-31 15:16:13 -0800, Ba r r y
said: On 31 Jan 2006 14:32:13 -0800, "brianlanning" wrote: My first mailorder big machine is showing up tomorrow at 3pm from abf freight and amazon. It's a 300lb sander. I know the truck has a lift gate. And the lady at the trucking company said that they would wheel it into the garage for me. I expect things to be uneventful. Can anyone suggest anything to watch out for? Should I tip this guy? Someone else already suggested an in-truck inspection, great idea. Hopefully, the "lady" and the actual driver are on the same page as far as inside delivery is concerned. Many trucking companies, including ABF in my area, will simply slide the item to the back of the rig and stop. With a lift gate, they're often nice enough to at least get it on the ground. G Barry As I am an ABF driver who delivers these all the time, there is one thing your should look for. Make sure there is no oil anywhere on the box. If it is a spindle sander, they are top heavy and some times they will tip over. I have had two or three of these have to come back because of miss handling on the dock. It's the only one of wich I have seen this problem. Amazon will usually pay for ground delivery. This only gets it to the ground in the street, if he can't back into your driveway. By the way tips are always welcome but not necessarry. |
#4
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
I would totally agree with what's been said about checking before
accepting delivery. Freight companies are the bane of our lives (I work for a scientific supply company). Also at least partially unpack before signing for delivery. We had one delivery where the outside cardboard box had a slight scrape mark along it, nothing anyone would be suspocious about. When the box was lifted off, the incubator inside had significant panel damage, someone had run a forklift right along the side. We've also had forklifts go through the sides iof icemakers, and had another icemaker dropped off a truck. All in all not a good look, and doesn't bode well for the years of trouble free use we would expect. Glenn |
#5
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
I can assure you from experience, $20.00 will buy you time to check it out
on & off the truck & also if it is within the driver's & his equipments ability, he will put it anywhere you want . . . Steve "brianlanning" wrote in message oups.com... My first mailorder big machine is showing up tomorrow at 3pm from abf freight and amazon. It's a 300lb sander. I know the truck has a lift gate. And the lady at the trucking company said that they would wheel it into the garage for me. I expect things to be uneventful. Can anyone suggest anything to watch out for? Should I tip this guy? brian |
#6
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
In article .com,
"brianlanning" wrote: Should I tip this guy? Damn straight. I always do. Mind you, my delivery guys have to negotiate a residential area and most of the time 12-foot skids with 160 to 200 pound 30 x 144 sheets of solid surface materials. Last delivery, 7 (seven) sheets on a skid. The driver remembered his delivery on a prior date and helped me hand-bomb the sheets off the truck. He then took the empty skid back with him. That's what I got for 50 bucks. 6K worth of material, a 200 dollar shipping bill...that 50 seems like the best deal ever. Another trucking company, last year, the driver goes: "Dude, where's the fork-lift?" and absolutely refused any co-operation. Lucky for me my Coast Guard buddy across the street was home and helped me take off ONE 160# sheet. (I have done them by myself, but my PT would shoot me if I did that now.) |
#7
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
It's a disk/belt sander so shouldn't have the oil problem. They had to
schedule the delivery for tomorrow instead of yesterday because they saw it was a residential delivery and had to wait for the liftgate truck to be available. How much of a hurry will he be in? I'd like to unpack while he's still here. brian |
#8
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
"brianlanning" wrote in message How much of a hurry will he be in? I'd like to unpack while he's still here. Depends on how busy he is. Drivers do have to report in along the way and they don't get paid to watch you unpack. Bt a $20 bill may convince him to take his break right about when he delivers to your house. If the outer carton shows damage, be sure to note that on the paperwork when you sign for it. |
#9
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
On 2006-01-31 20:24:01 -0800, "brianlanning" said:
It's a disk/belt sander so shouldn't have the oil problem. They had to schedule the delivery for tomorrow instead of yesterday because they saw it was a residential delivery and had to wait for the liftgate truck to be available. How much of a hurry will he be in? I'd like to unpack while he's still here. brian It's not a matter of being in a hurry. We try to make sure that everything is O.K., If there is no visable damage to the packaging we have a responability to have the freight bill signed for before you open it. If you find any visable damage, make sure that you inspect the carton and make a note on the freight bill. The driver wants to make sure that he is covered also. We have had more than one customer claim damage when the packaging shows none. If he is any kind of profesional,like I'm sure he will be, he will want to help you document any problems that may arise.Its been my experience with these bigger machines that they have very few problems wth damage. The biggest problem I have is that I can't stick around long enough to play with the new toy !! Who knows it may be me who shows up at your door....... |
#10
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
MOVE TO IRELAND. Its a smaller country.
The companies I buy my machines from deliver themselves to me so they dont have any forklift damage! Good luck with your delivery. On Tue, 31 Jan 2006 22:32:13 -0000, brianlanning wrote: My first mailorder big machine is showing up tomorrow at 3pm from abf freight and amazon. It's a 300lb sander. I know the truck has a lift gate. And the lady at the trucking company said that they would wheel it into the garage for me. I expect things to be uneventful. Can anyone suggest anything to watch out for? Should I tip this guy? brian -- http://www.connoraston.com |
#11
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
Who knows it may be me who shows up at your door......
Maybe it was. I didn't get his name, but he seemed like a good guy. I'd say he was maybe 5'10", normal build, and maybe about 50yo. There was a bit of damage to the box at the corner, but you could see from the outside of the box that the styrofoam was probably ok. He stayed around long enough for me to open the box and take most of the parts out and see that the styro was ok on the inside. He said he wanted a shop, but his wife wanted to park in the garage. lol Anyway, things went well. I got most of it put together. But I couldn't find my mineral spirits can. So I'll be be finishing it tomorrow. Thanks to everyone who helped. brian |
#12
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
On 2006-02-01 19:57:17 -0800, "brianlanning" said:
Who knows it may be me who shows up at your door...... Maybe it was. I didn't get his name, but he seemed like a good guy. I'd say he was maybe 5'10", normal build, and maybe about 50yo. There was a bit of damage to the box at the corner, but you could see from the outside of the box that the styrofoam was probably ok. He stayed around long enough for me to open the box and take most of the parts out and see that the styro was ok on the inside. He said he wanted a shop, but his wife wanted to park in the garage. lol Anyway, things went well. I got most of it put together. But I couldn't find my mineral spirits can. So I'll be be finishing it tomorrow. Thanks to everyone who helped. brian I'm glad everything went well for you and your delivery. The Tool Crib is one of our big customers, so we move a lot of product for them. Just curious. Did you tip him? |
#13
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
"brianlanning" wrote in message oups.com... Anyway, things went well. I got most of it put together. But I couldn't find my mineral spirits can. So I'll be be finishing it tomorrow. Thanks to everyone who helped. You couldn't find your mineral spirits can???? Hell, it's that big gallon can right next to the big gallon can of lacquer thinner. Oh well - just fill up another from the 5 gallon bucket on the floor. -- -Mike- |
#14
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
On Thu, 02 Feb 2006 05:16:06 GMT, Vidkid26 video city@my video.com wrote:
SNIP I'm glad everything went well for you and your delivery. The Tool Crib is one of our big customers, so we move a lot of product for them. Just curious. Did you tip him? I did not see the original post, but I always tip the common carrier driver. Most try to refuse, but I just tell them to "have lunch on me." :-) ____________________ Bill Waller New Eagle, PA |
#15
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
Just curious. Did you tip him?
yeah, $20. brian |
#16
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
We're still fighting about basement vs. garage and now
you add Ireland to the mix? Ok... basement vs. garage vs. Ireland. I'm still sticking with the basement. Connor Aston wrote: MOVE TO IRELAND. Its a smaller country. The companies I buy my machines from deliver themselves to me so they dont have any forklift damage! Good luck with your delivery. |
#17
Posted to rec.woodworking
|
|||
|
|||
My first mailorder big machine
Mike Berger wrote in news:drtb87$4ps$6
@roundup.shout.net: Ok... basement vs. garage vs. Ireland. I'm still sticking with the basement. Me too. I have a hard enough time just getting downstairs. The commute time to Ireland would just be too much. -- Regards, JT Speaking only for myself.... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wash Machine | Home Repair | |||
Milling machine table repair | Metalworking | |||
Getting 120v Single Phase from 3 Phase | Metalworking | |||
Help! Trying to get a fax machine working with an answering machine/PABX | UK diy | |||
multiple simultaneous washing machine problems | UK diy |