Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
I have a section of driveway that has a surface made of limestone that's
about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? I wish my dad was still alive. He was in the road surfacing game in supervisory roles for the last half of his working life. he'd know what to do. Bill |
#2
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
williamwright wrote
I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? Concrete works much better. I wish my dad was still alive. He was in the road surfacing game in supervisory roles for the last half of his working life. he'd know what to do. |
#3
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
On Tuesday, 11 February 2020 01:56:01 UTC, williamwright wrote:
I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? I wish my dad was still alive. He was in the road surfacing game in supervisory roles for the last half of his working life. he'd know what to do. Bill I assume you're going to DIY,in which case concrete is your best bet. For utility, you only need do the sloping bit or even two parallel strips where the wheels run. You need to think if trucks use it, there may be a need for reinforcing steel. Almost invariably the case. It only takes one truck to wreck it. Sloping gravel roads need barriers at intervals and side ditches to direct the water off the road and convey it away. The barriers can be a simple tump across the road at 45deg They need regular attention as wheels wear them away and fine material piles up behind them. You also need to avoid "tramlining" by driving allover a gravel road to equalise out the wear. (Water runs down the tramlines.) |
#5
Posted to uk.d-i-y
|
|||
|
|||
Lonely Auto-contradicting Psychotic Senile Ozzie Troll Alert! LOL
On Tue, 11 Feb 2020 14:08:17 +1100, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again: Concrete works much better. You have no idea how he uses his driveway, senile wisenheimer. -- dennis@home to know-it-all Rot Speed: "You really should stop commenting on things you know nothing about." Message-ID: |
#6
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
On Tuesday, February 11, 2020 at 1:56:01 AM UTC, williamwright wrote:
I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? I wish my dad was still alive. He was in the road surfacing game in supervisory roles for the last half of his working life. he'd know what to do. Bill We had a loose gravel drive but the young adults in the family woUld not slow down for the bend so the gravel all ended up on the outside of it. I gave up on raking it, too much like hard work, so we tarmacadamed it over 20 years ago and its is still going strong. Moss is the only problem. Its a damn sight easier to gather leaves from. Billygoat ( https://www.billygoat.com/eu/en_gb/p...r-vacuums.html )sees to that |
#7
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
In message , williamwright
writes I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? I wish my dad was still alive. He was in the road surfacing game in supervisory roles for the last half of his working life. he'd know what to do. I've been looking at clip together plastic grid sections for our *almost level* drive. 'kin expensive considering they claim to be re-cycled material. Neighbours have 20mm pebbles and that is noisy and moves about. I would fill with 6-10mm roadstone if we ever do it. Highways get very cross if you allow loose material from your drive to reach their road surface! https://www.ebay.co.uk/itm/173167663196 -- Tim Lamb |
#8
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
On Tue, 11 Feb 2020 01:55:58 +0000, williamwright wrote:
I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? For a hard wearing utility area I'd go for concrete especially if it has to carry a regular load. Bitmac is good for a residential drive taking mostly domestic vehicles with the occasional heavy wagon. What the relative costs are I don't know. |
#9
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
On 11/02/2020 10:44, Bev wrote:
On Tue, 11 Feb 2020 01:55:58 +0000, williamwright wrote: I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? For a hard wearing utility area I'd go for concrete especially if it has to carry a regular load. Bitmac is good for a residential drive taking mostly domestic vehicles with the occasional heavy wagon. What the relative costs are I don't know. Concrete is not a good choice if you put down salt to counteract icy conditions for it causes the concrete to crumble away. |
#10
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
Gareth Evans Wrote in message:
On 11/02/2020 10:44, Bev wrote: On Tue, 11 Feb 2020 01:55:58 +0000, williamwright wrote: I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? For a hard wearing utility area I'd go for concrete especially if it has to carry a regular load. Bitmac is good for a residential drive taking mostly domestic vehicles with the occasional heavy wagon. What the relative costs are I don't know. Concrete is not a good choice if you put down salt to counteract icy conditions for it causes the concrete to crumble away. Doesnt seem to bother large stretches of motorway? -- Jimk ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#11
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
On Tue, 11 Feb 2020 10:56:13 +0000, Gareth Evans wrote:
On 11/02/2020 10:44, Bev wrote: On Tue, 11 Feb 2020 01:55:58 +0000, williamwright wrote: I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? For a hard wearing utility area I'd go for concrete especially if it has to carry a regular load. Bitmac is good for a residential drive taking mostly domestic vehicles with the occasional heavy wagon. What the relative costs are I don't know. Concrete is not a good choice if you put down salt to counteract icy conditions for it causes the concrete to crumble away. If you oversalt it does but just don't oversalt. |
#12
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
On 11/02/2020 01:55, williamwright wrote:
I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? I wish my dad was still alive. He was in the road surfacing game in supervisory roles for the last half of his working life. he'd know what to do. Bill One of my neighbours had this problem in the steeper bit of slope down to the road, in the end they installed concrete moulded to imitate worn stone blocks which does not look too bad, and controls the worst of the migration. |
#13
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
"newshound" wrote in message o.uk... On 11/02/2020 01:55, williamwright wrote: I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? I wish my dad was still alive. He was in the road surfacing game in supervisory roles for the last half of his working life. he'd know what to do. One of my neighbours had this problem in the steeper bit of slope down to the road, in the end they installed concrete moulded to imitate worn stone blocks which does not look too bad, But is a bugger to walk on. Nothing wrong with flat concrete. and controls the worst of the migration. Makes more sense to do the whole thing in concrete. |
#14
Posted to uk.d-i-y
|
|||
|
|||
Lonely Auto-contradicting Psychotic Senile Ozzie Troll Alert! LOL
On Wed, 12 Feb 2020 05:20:37 +1100, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again: One of my neighbours had this problem in the steeper bit of slope down to the road, in the end they installed concrete moulded to imitate worn stone blocks which does not look too bad, But is a bugger to walk on. Nothing wrong with flat concrete. You don't know the circumstances, you "all-knowing" senile Arsetralian! and controls the worst of the migration. Makes more sense to do the whole thing in concrete. Would make more sense if you just swallowed your Nembutal! What did you buy it for anyway, you 85-year-old trolling senile pest? -- Website (from 2007) dedicated to the 85-year-old trolling senile cretin from Oz: https://www.pcreview.co.uk/threads/r...d-faq.2973853/ |
#15
Posted to uk.d-i-y
|
|||
|
|||
surfacing a drive
On 11/02/2020 10:56, Gareth Evans wrote:
On 11/02/2020 10:44, Bev wrote: On Tue, 11 Feb 2020 01:55:58 +0000, williamwright wrote: I have a section of driveway that has a surface made of limestone that's about a foot deep. It's OK and good enough except that part of it is on a one in eight slope and when we have a downpour the finer bits of stone get washed down the hill. I think the only solution is a proper surface, but what? It is purely a utility area so appearance doesn't matter. I don't want to spend a mint on this. The area I would do is ten foot wide by about seventy feet long. Asphalt or what? Brush some dry mix into the part on the slope to help bind it together? For a hard wearing utility area I'd go for concrete especially if it has to carry a regular load.Â* Bitmac is good for a residential drive taking mostly domestic vehicles with the occasional heavy wagon. What the relative costs are I don't know. Concrete is not a good choice if you put down salt to counteract icy conditions for it causes the concrete to crumble away. Only if it is particularly low grade concrete and you add a heck of a lot of salt. A local village had new fancy coloured concrete paving slabs laid which never really looked up to the job and turned out to be easily destroyed by salt and freeze thaw action the first winter. My drive is ribbed concrete and slope about 20%. It has survived salt and is well behaved. I gather that modern practice is not to have such ribs any more. Neighbours was done by the same contractor last year and they now do a smooth finish which resists salt attack even better. My drive is at least 4 decades old and shows no signs of the concrete deteriorating despite occasionally getting the coal wagon on it. It was laid in rafts about 12'x20' with about 1" gaps between them. -- Regards, Martin Brown |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Resin gravel drive surfacing | UK diy | |||
resin bonded drive surfacing | UK diy | |||
Cheap/easy surfacing for drive | UK diy | |||
spring water surfacing in driveway | Home Repair | |||
Anyone here used a Walker Turner Surfacing Machine? | Woodworking |