Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Best way to join (extend) a Cat5e cable?
I wish to move my home (personal) server into another room however
whilst I took advantage of a complete house restoration to install Cat5e cabling I now find that the socket in the new room is not in the best position for the intended layout. I don't really want to run a long patch cable across/around the room to this socket, purely for aesthetic reasons. Fortunately the new room is currently being redecorated hence the carpet is up and I have full access to under the floor. Hence, if acceptable, I am able to install a new RJ45 socket on the opposite wall and extend the original cable to it (blanking off the original socket as there's only the one cable running to this one). The cable is solid core UTP and is perhaps no more than 20m in length. It is currently supporting a 100mbps network. What would be the best way to extend the cable? I was considering soldering/heatshrinking as opposed to fitting plugs and using a coupler. Is this a bad idea? Unfortunately running a new cable is unlikely to be an acceptable option. Any suggestions/advice? Mathew P.S. Bugger - there is also a telephone and TV aerial outlet too - perhaps I ought to move them whilst I'm at it. Telephone will be no problem (solder) but what about TV? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Using the Sewer Vent for Cable or Cat5e Run? | Home Repair | |||
What is the best solution to extend a coax cable from one building to another? | UK diy | |||
Running Cat5e cable underground | UK diy | |||
cat5e and phone cable | Home Repair | |||
How to extend electricity cable? | UK diy |