Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Worktop mason's mitre jigs
Why do these jigs specify a minimum worktop width?
I need to join a couple of bullnose bathroom worktops at right angles; they're about 200mm deep which seems to be smaller than any of the jigs can handle - any suggestions on how to do it? I wondered about using the aluminium corner joint strips but can't find anything for a 14mm bull nose. Dave |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mitre square edge worktop? | UK diy | |||
Mitre of kitchen worktop anyone?? | UK diy | |||
Worktop jigs and radii | UK diy | |||
Kitchen worktop jigs | UK diy | |||
Routers & Worktop Jigs | UK diy |