Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Building a Belt Grinder
I am considering building a belt grinder.
Hey, who am I kidding...of course I am going to build one. One can never have too many tools. ;) I have taken the time to look at a number of commerical and home built versions. Of course after doing this, I have more questions than answers. ;) If you were going to build a belt grinder, what form would it take? I note that 2"x72" seem to be the most common belt size. Would you recommend a different size? Would you use a vertical, horizontal, adjustable platen or none at all? What size of motor? Speed? Any dust collection? If you are aware of any good designs to copy, please feel free to offer a pointer to them. I am not trying to build just one grinder but it would be nice to keep the number to a minimum of variations. Thanks TMT |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Exemption from building regs??? | UK diy | |||
Windsor Plywood Scam - Saskatoon | Woodworking | |||
Changing the belt on a Jet Supersaw | Woodworking | |||
Replacing drive belt on GE dryer. | Home Repair | |||
Old reliable belt drive washer | Home Repair |