Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
shaper tool holders
Just acquired an Alba4S shaper 18" stroke .
I'm looking for armstrong type tool holders ,preferably the T series with no back rake . A universal type would also be nice to have . The shank size I need is 5/8 thicknes. Ive looked on Ebay and thos on there are either too large in the shank or are for planers. Knowing some of you blokes on this forum are masters at finding stuff ,I thought I would put out the word. I also need a shaper vice , with jaws around 9" wide , but the cost of shipping from the US would be deadly me thinks. -- Kevin (Bluey) "I'm not young enough to know everything." |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
dickson tool holders... | Metalworking | |||
Size of KDK-100 vs BX Tool holders | Metalworking | |||
WTB: #35 tool holders | Metalworking | |||
Tool holders for Smithy? | Metalworking | |||
WTB: BT30 tool holders | Metalworking |