On Thu, 25 Nov 2010 11:56:53 -0500, Phred
scribed:

On Wed, 24 Nov 2010 15:58:03 -0500, Phred
scribed:

Hey all:

I was asked to dispose of a Jet/Max BP style machine, exact clone of
the Bridgeport mill, including DRO, cutters and other tooling... I
figured I'd grab it for myself and rework it in my spare time.
Actually it only has about 100 hours on it, I trammed the ways and are
all well and good. So good deal for free.

1st question is how to transport it to my house...

Can a flatbed tilt wrecker handle this? I figure if it can winch a SUV
up, it can handle a 1 ton machine as long as it is secured well? It's
only going 12 miles.

What type of floor does this need? I have a 20x20 shed that I would
like to put it in, but it's raised on cinder blocks (so she dinna
rot). Can I use lolly's just under the floor where the machine is, or
should I move the shed, pour a floor, and drop said shed back on it's
new foundation?

Also, I need to run 240 for the 3 phase... I have it in the house for
the W/D, but having never run power outside, what should I look for...
Buried line? Can I also run lighting for the shed off the same panel?

This was a Garden Shed, but I think it will do better as a shop now
that I have a machine. My basement is too low and confined, plus I
really dinna want the smell of coolant and swarf wafting into the
living room.

Guess that's it. Thanks' gang... Have a Great Holiday!

Fred Fowler III


WOW! So many great ideas! I'm gonna put this on hold fer a day...I
dinna ken about the power, the VF modulator sounds right, I reckon I
can juice this from that 100A panel... Buried of course... I may get a
nice old SB lathe too in this deal. Needs some work, but I'll have it
cutting in no time...

Also have a friend that owns a wrecker with one of the hoist that can
take a SUV out a tight parking spot. He Also does Repo work. I figure
that for 100B/H Plus a 12 pack of the Sam Adams... Good to go. I will
get it moved. Palletted nicely Great help guys!