 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
WTF Rigger/shipper - Boston area.
Joseph Gwinn wrote:
In article , RBnDFW wrote: I found a lathe like I want. It's in Maynard, MA, in the Boston regional area I'm in Fort Worth TX. Do any of you know someone in that area who could pick up this machine and have it shipped here? Any guesses as to what it would cost? A member on another forum looked at it and reported this: "The seller has no expertise in moving machine tools, and no equipment with which to do so. There are three sets of double doors, 50' of linoleum floor, and 100' of carpet standing between the lathe and a loading dock." This probably won't work out for me, but any suggestions welcome. Any local rigger can probably do the job. The one rigger I have used (in December 2007) is: Sacco's Specialized Moving 41 Atlantic Ave Woburn. MA 01801 877-376-9500 Thanks, I'll call them |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Dip-stripping company in Boston area? | Home Repair | |||
| Boston area aluminum welding shop? | Metalworking | |||
| Architect recommendation in Boston area | Home Repair | |||
| Boston area Steel supplier | Metalworking | |||
| good inspector to recommend in the Boston area? | Home Ownership | |||
Threaded Mode
