I'm looking for a shop in the Boston area that does good TIG welding of
aluminum. I have an aluminum (356.2 T6) ship's horn that needs repair
that requires patching a 1/2" wide hole and fabrication of a new
bracket (very simple, from two pieces of 5/8" or 3/4" aluminum flat). I
need to get it done locally because it's a large 5-foot long, 75 pound
casting.

I know of a guy near Taunton that's a wiz with aluminum. Is that local
enough?


"diaphone" wrote in message
ups.com...
I'm looking for a shop in the Boston area that does good TIG welding of
aluminum. I have an aluminum (356.2 T6) ship's horn that needs repair
that requires patching a 1/2" wide hole and fabrication of a new
bracket (very simple, from two pieces of 5/8" or 3/4" aluminum flat). I
need to get it done locally because it's a large 5-foot long, 75 pound
casting.

Yes, that's close enough!

I can be reached at:

adam 'at' airraidsirens 'dot' com

Thanks!

On 18 Jan 2006 14:36:48 -0800, diaphone wrote:
I can be reached at:
adam 'at' airraidsirens 'dot' com
Thanks!

OK, but you should know that because you're posting from google, and
your posts don't include any context, people don't know what or who this
is in response to unless the go out of their way to back-track the
thread.

Dave Hinz wrote:
OK, but you should know that because you're posting from google, and
your posts don't include any context, people don't know what or who this
is in response to unless the go out of their way to back-track the
thread.

Not "people" in general, only people who don't know how to use their
newsreaders or who are reading news from news servers with poor thread
completion issues. In your case, I believe you're looking for the slrn
command 'ESC p'.

When posting to Usenet, you should generally _not_ quote chunks of a
previous post text "for context" like you would in an email. There are
times when it's appropriate, of course, for example I do it above with
your comments specifically because of the thread-following difficulty
you're having. Usenet posts get distributed to millions of servers
worldwide where such a data redundancy is an unnecessary and huge waste
of computer resources. The whole point of threaded news is that your
newsreader does the work of the linking the threads using the message
reference IDs. When this is achieved, quoting of the post immediately
previous is normally unnecessary.

Google is not the problem, by the way, Google handles the message and
reference IDs correctly. It sounds to me like you have some beef with
Google or Google posters that is misguided.

-Adam

In article .com,
"diaphone" wrote:

Dave Hinz wrote:
your posts don't include any context, people don't know what or who this
is in response to unless the go out of their way to back-track the
thread.

Not "people" in general, only people who don't know how to use their
newsreaders or who are reading news from news servers with poor thread
completion issues.

It's more than that. It's about communication to others, in a way that
makes it easy for them to understand what you've written, or to be able
to make the decision that they do not need to read further. If you want
others to be influenced by what you write, then you need to make it easy
for them to understand both the content and context of what you say, and
to be inclusive of your possible audience, rather than exclusive.

When posting to Usenet, you should generally _not_ quote chunks of a
previous post text "for context" like you would in an email.

Correct, since email quoting is usually done with top posting to
maintain full context (often for CYA). The accepted rules for Usenet
have always been "appropriate quoting", where redundant or extraneous
material is removed (trimmed) and comments made after the relevant quote
left in. The opposite of top posting is not quoting the entire message
to which you are replying and placing your reply after this (often
mistakenly called bottom posting). Early 'good' newsreaders often
enforced having your contribution larger than that which you were
quoting to avoid the "Yes, I agree", or "Me too" single line postings at
the end of multi-page quoted text.

There are
times when it's appropriate, of course, for example I do it above with
your comments specifically because of the thread-following difficulty
you're having.

And others who aren't using Google Groups, and sometimes even those who
are. The reason for this I have outlined two paragraphs down.

Usenet posts get distributed to millions of servers
worldwide where such a data redundancy is an unnecessary and huge waste
of computer resources.

The computers handle this relatively well automatically - the weak link
is the human in the process. Although there are many forum websites now
out there, I still think Usenet read through a specialised newsreader is
the most efficient way of reading news and provides the best
signal/noise ratio. The biggest waste of resources are probably the
binary newsgroups, spam, off-topic politics and full quoting (and
probably metadiscussions like this), not a line or two of appropriate
quoting.

The whole point of threaded news is that your
newsreader does the work of the linking the threads using the message
reference IDs. When this is achieved, quoting of the post immediately
previous is normally unnecessary.

I personally find appropriate quoting quite useful. Where reference IDs
completely fall down is where the article to which you are replying has
not yet reached the news server you are using, or has reached it and has
been expired out. In both these cases the reference ID is completely
useless in trying to figure out what you are responding to. If you say
"You should be using one system: my system, Google Groups", then I would
respectfully disagree with you. Usenet is not like a forum website
managed by one server in one location and articles may take time to
propagate articles through the many systems that contribute to Usenet.
Replies take time to propagate back through the systems to the
originator, sometimes minutes, hours or days; sometimes never.

This isn't about 'First Amendment'; Usenet extends beyond the nominal
borders of the United States of America, this isn't about NetCopping: I
have no way of enforcing what you can or can't say in this newsgroup, it
is an attempt to convince you that there is a better method of
communication that follows conventions developed over 20+ years of
Usenet. In fact, it really isn't an attempt to convince you, but maybe a
hope that it will: my audience is the readers of this article who may
have been swayed by your article to believe that your way is the best
way.

In fact, it would have been easier to killfile you than to spend time
writing this article, yet I think that you could have much that is
worthwhile reading. Two clicks away from oblivion (at least to me) yet
your views are worth debating. Such is the nature of Usenet.

Google is not the problem, by the way, Google handles the message and
reference IDs correctly. It sounds to me like you have some beef with
Google or Google posters that is misguided.

My experience with Google is that their groups works, but there are far
more useful Usenet readers. Indeed I preferred the ancestor of Google
Groups, 'dejanews'. Google Groups reliance on reference IDs can be a bad
thing in reading threads, since you can't dissociate them from an
original article in the case of topic drift: almost inevitable in long
running threads. Thus you may miss an important thread since it is
classified under it's original subject and thereafter referred to by the
original Reference ID.

Cheers,
Bill Lee

I'll pass this along to him this weekend.

Eide

"diaphone" wrote in message
oups.com...
I can be reached at:

adam 'at' airraidsirens 'dot' com

Thanks!