Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Exhaust gasket goo
My 8N ford tractor has a loud clatter...
I found the cause, the exhaust gasket has blown out in a small spot. The metal in the block is slightly burned away. ( a couple years ago, I put a new manifold on so its in good shape here) Its a flat head engine so the ports are in the block not on the heads. And to make matters even worse the block on a tractor is the frame support also. No way can I take the thing apart enough to re-machine this surface. So, do they make some sort of gasket goo to add to the manifold gaskets that will correct this problem? Karl |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
window gasket? | Home Repair | |||
Gasket material | Metalworking | |||
Dryer exhaust and bathroom exhaust distances | Home Repair | |||
Gasket design | Home Repair | |||
Roof exhaust fan with too much exhaust | Home Repair |