Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Cleaning morse taper in headstock
Thanks to Steve's, he lent me a MT5 test bar. It fits into MT5 opening
in the spindle. My problem is that there is some sort of crud (or rust) in it and the bar does not seem to be well aligned. So I would like to remove that crud by some non-intrusive means, any ideas how I can do it without runing the accuracy potential of the spindle. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for Morse taper/1-8 adapter | Woodturning | |||
Morse Taper grinding | Metalworking | |||
#2 morse taper to 1" - 8 | Woodturning | |||
morse taper | Metalworking | |||
2 Morse taper extender to 3 taper, then 1 inch threading die holder | Metalworking |