Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
SAE 10 Wt ND Oil?
I have 7 "Hunter Original" ceiling fans that i need oil for. The "fan"
oil is 3 dollars a tube, good for one fan.(At Home Depot) It's just SAE 10 Wt Non Detergent oil but I can't seem to find any in quantity so I don't have to pay the outrageous price of 3 dollars a tube. I was thinking about "3 in 1 oil" but it doesn't say what Wt it is or if it's ND. I was also thinking about pneumatic tool oil. Does anyone have any idea what wt it is and if it's ND? Maybe even an online fan site that sells it in quantity for a low price. Any suggestions would be of great help. |
#2
|
|||
|
|||
Whatever you put in your car will be fine
|
#4
|
|||
|
|||
John,
According to their web site 3 in 1 multipurpose oil is 17 wt. and 3 in 1 motor oil is 20 wt. they are both non-detergent. See http://www.wd40.com/Brands/3in1_faqs.html Dave M. |
#5
|
|||
|
|||
"Ron" wrote in message ... I have 7 "Hunter Original" ceiling fans that i need oil for. The "fan" oil is 3 dollars a tube, good for one fan.(At Home Depot) It's just SAE 10 Wt Non Detergent oil but I can't seem to find any in quantity so I don't have to pay the outrageous price of 3 dollars a tube. I was thinking about "3 in 1 oil" but it doesn't say what Wt it is or if it's ND. I was also thinking about pneumatic tool oil. Does anyone have any idea what wt it is and if it's ND? Maybe even an online fan site that sells it in quantity for a low price. Any suggestions would be of great help. This is Turtle. Most all motor manufactor state that you should use 20 wt. SAE Non-detergent standard motor oil in most all motors unless state other wise. I use 30 wt. SAE Non-detergent standard motor oil to oil motor. They sell 30 wt. non-detergent motor oil at most all auto parts houses or I think they sell it at Walmarts , too. Also get you a small flex hose oil gun too and keep it handy for other stuff. I'm Speaking of standard auto non-detergent motor oil for autos at about a $1.00 something a Qt. . I use the 30 wt. because it is hard to find the 20 wt. in motor oil form everywhere. I think the 10 wt. oil is not thick enough to stay in the bearing and bearing packing. Also it makes you buy the 10 wt. oil from Hunter because it is very hard to find 10 wt. oil anywhere. TURTLE |
#6
|
|||
|
|||
|
#7
|
|||
|
|||
Hi, Ron.
The detergency is a "red herring"- it certainly can't cause problems to keep submicroscopic debris in suspension, whether or not you're going to change the oil. Any SAE 10 vi (viscosity index) oil with an API (American Petroleum Institute) grade on the label should be way more than you need. Ditto 20 vi, really. These things don't turn at 10k rpm. :') This all begs the question "why doesn't mfg. use proper sealed roller-bearings?" |
#8
|
|||
|
|||
Ron wrote:
I have 7 "Hunter Original" ceiling fans that i need oil for. The "fan" oil is 3 dollars a tube, good for one fan.(At Home Depot) It's just SAE 10 Wt Non Detergent oil but I can't seem to find any in quantity so I don't have to pay the outrageous price of 3 dollars a tube. I was thinking about "3 in 1 oil" but it doesn't say what Wt it is or if it's ND. I was also thinking about pneumatic tool oil. Does anyone have any idea what wt it is and if it's ND? Maybe even an online fan site that sells it in quantity for a low price. Any suggestions would be of great help. A tube of oil for one fan? What you want is often called Turbine oil, which is good for high temperatures, low viscosity, and does not get gummy, made for motors. Appliance manufactures put their own brand name on it; one bottle I have says "Maytag." Also sold as "Spout" or something "..out." I've seen this stuff in 2-3 ounce quantities in various places including Walmart. (about $4) Can't imagine why you want much. You only use 2-4 drops per electric motor of any type. I've been using out of a 3 ounce bottle for various things including motors and other bearings for 30 years. Don't use 3 in 1, it will get gummy. You are probably right in suggesting pneumatic tool oil. Course, if you want to go really high class, get some clock oil which is probably the same as Turbine oil. |
#9
|
|||
|
|||
In ,
Ron spewed forth and said: I have 7 "Hunter Original" ceiling fans that i need oil for. The "fan" oil is 3 dollars a tube, good for one fan.(At Home Depot) It's just SAE 10 Wt Non Detergent oil but I can't seem to find any in quantity so I don't have to pay the outrageous price of 3 dollars a tube. I was thinking about "3 in 1 oil" but it doesn't say what Wt it is or if it's ND. I was also thinking about pneumatic tool oil. Does anyone have any idea what wt it is and if it's ND? Maybe even an online fan site that sells it in quantity for a low price. Any suggestions would be of great help. Try a sewing shop. Most sewing machine oils are ND 10wt |
#10
|
|||
|
|||
George, "Hunter Original" ceiling fans have a reservoir that holds 1oz
of oil that lubricates the bearings and shaft. 1oz for THREE dollars! Now you see why I'm looking for alternatives. I got a GREAT deal on the fans at an estate sale but had to buy mounting hardware which was a little costly (Hunter) So if worst comes to worst I'll shell out the 21 bucks, just trying to save some money. |
#11
|
|||
|
|||
Ron wrote:
George, "Hunter Original" ceiling fans have a reservoir that holds 1oz of oil that lubricates the bearings and shaft. 1oz for THREE dollars! Now you see why I'm looking for alternatives. I got a GREAT deal on the fans at an estate sale but had to buy mounting hardware which was a little costly (Hunter) So if worst comes to worst I'll shell out the 21 bucks, just trying to save some money. Wow! That much oil should last 30 years. I'm with Barry, they should have used sealed bearings. BTW, the turbine oil is also sold as Zoom. I'd be tempted to use automatic transmission fluid which is likely superior to the Hunter oil. No oil is worth $21 for 3 oz, even sperm whale oil. |
#12
|
|||
|
|||
Lightweight Mobil1 would work fine also.
Synthetics are extremely thin and watery and will likley last a very long time under the environment of a cieling fan motor. I know about the Hunter fan Reservoir too. I think it works well, and is quite sufficient for the motor designs of their times. Give the Mobil1 a try. It will certainly not hurt the motor anyway. Remove "YOURPANTIES" to reply MUADIB® http://www.angelfire.com/retro/sster...IN%20PAGE.html one small step for man,..... One giant leap for attorneys. |
#13
|
|||
|
|||
Top posting repaired...
Bud wrote: George E. Cawthon wrote: Ron wrote: .... ....No oil is worth $21 for 3 oz, even sperm whale oil. I suppose the whale may have a differing view on that one... I think automatic transmission fluid is not oil. It's a refined petroleum product w/ some specific additives for the purpose. Very much similar to a light weight oi. |
#14
|
|||
|
|||
I think automatic transmission fluid is not oil.
Bud-- George E. Cawthon wrote: Ron wrote: George, "Hunter Original" ceiling fans have a reservoir that holds 1oz of oil that lubricates the bearings and shaft. 1oz for THREE dollars! Now you see why I'm looking for alternatives. I got a GREAT deal on the fans at an estate sale but had to buy mounting hardware which was a little costly (Hunter) So if worst comes to worst I'll shell out the 21 bucks, just trying to save some money. Wow! That much oil should last 30 years. I'm with Barry, they should have used sealed bearings. BTW, the turbine oil is also sold as Zoom. I'd be tempted to use automatic transmission fluid which is likely superior to the Hunter oil. No oil is worth $21 for 3 oz, even sperm whale oil. |
#16
|
|||
|
|||
Duane Bozarth wrote:
Top posting repaired... Bud wrote: George E. Cawthon wrote: Ron wrote: ... ....No oil is worth $21 for 3 oz, even sperm whale oil. I suppose the whale may have a differing view on that one... I think automatic transmission fluid is not oil. It's a refined petroleum product w/ some specific additives for the purpose. Very much similar to a light weight oi. I think the whale would agree with me, since you have to render the fat to get the oil; don't think whales much like rendering. Anyway, not much sperm oil around. Illegal to collect now? Lots of muzzleloaders swore by it, but I haven't kept up for many years now. |
#17
|
|||
|
|||
"George E. Cawthon" wrote:
Duane Bozarth wrote: .... George E. Cawthon wrote: .... ....No oil is worth $21 for 3 oz, even sperm whale oil. I suppose the whale may have a differing view on that one... .... I think the whale would agree with me, since you have to render the fat to get the oil; don't think whales much like rendering. Anyway, not much sperm oil around. Illegal to collect now? Lots of muzzleloaders swore by it, but I haven't kept up for many years now. I meant it in the sense that any price for whale oil would be too cheap from the whale's perspective....sorta' a backwards agreement.... Whaling is outlawed afaik -- last I knew I believe the Japanese were the last commercial whalers but I'm not sure whether they've finally ceased or not...I presume they have since haven't heard anything about if for quite some time now. |
#18
|
|||
|
|||
In article ,
(Ron) says... George, "Hunter Original" ceiling fans have a reservoir that holds 1oz of oil that lubricates the bearings and shaft. 1oz for THREE dollars! Now you see why I'm looking for alternatives. I got a GREAT deal on the fans at an estate sale but had to buy mounting hardware which was a little costly (Hunter) So if worst comes to worst I'll shell out the 21 bucks, just trying to save some money. I picked up a 12 oz. can of Valvoline Synpower lubricant at Big Lots for $1.79. It seems to be pretty good stuff. For light weight lubrication, I use Gunk Super Oil, which is ultra slick, non-gumming and non-drying. It is good for everything from valve oil in my trumpet to sewing machines to hair clippers. It is lighter weight than 3 in 1, and may be just what you are looking for. -- http://home.teleport.com/~larryc |
#19
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
replying to Ron, pat wrote:
ron you can get sae 10 weight look into water windmill oil to find it buy the quarts -- for full context, visit https://www.homeownershub.com/mainte...il-598502-.htm |
#20
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
replying to Ron, Kath wrote:
I bought a quart of SAE 10W-30 at Ace Hardware. It is their brand motor oil for all seasons. They told me it is non-detergent. I ran it in my fans all summer with no problem. I hope this is OK Im starting to second-guess myself -- for full context, visit https://www.homeownershub.com/mainte...il-598502-.htm |
#21
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
Kath wrote:
replying to Ron, Kath wrote: I bought a quart of SAE 10W-30 at Ace Hardware. It is their brand motor oil for all seasons. They told me it is non-detergent. I ran it in my fans all summer with no problem. I hope this is OK Im starting to second-guess myself I don't think a fan runs as "dirty" as a car, so I think you'll be fine. The idea of the detergent is to remove sludge, I think. Of course, I don't have a fan that you have to add oil to. Anyway, don't lose any sleep over it. |
#22
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
On Sat, 02 Dec 2017 15:44:03 GMT, Kath
m wrote: replying to Ron, Kath wrote: I bought a quart of SAE 10W-30 at Ace Hardware. It is their brand motor oil for all seasons. They told me it is non-detergent. I ran it in my fans all summer with no problem. I hope this is OK Im starting to second-guess myself Why would anyone think "10w-30 motor oil" was non detergent unless it specifically said so (and I only see than in straight 30w). If it has an API rating like "SN", the current standard, it certainly is detergent oil. For just oiling a fan I am not sure it is really important anyway. A lot depends on what kind of fan we are talking about tho and what bearings it uses. Are there oil cups? If these are the permanently oiled bearings in a cheap box fan, you are just ****ing on the fire because most types of oil will just gum them up over time. |
#23
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
On Saturday, December 2, 2017 at 12:22:25 PM UTC-5, wrote:
On Sat, 02 Dec 2017 15:44:03 GMT, Kath m wrote: replying to Ron, Kath wrote: I bought a quart of SAE 10W-30 at Ace Hardware. It is their brand motor oil for all seasons. They told me it is non-detergent. I ran it in my fans all summer with no problem. I hope this is OK Im starting to second-guess myself Why would anyone think "10w-30 motor oil" was non detergent unless it specifically said so (and I only see than in straight 30w). If it has an API rating like "SN", the current standard, it certainly is detergent oil. For just oiling a fan I am not sure it is really important anyway. A lot depends on what kind of fan we are talking about tho and what bearings it uses. Are there oil cups? If these are the permanently oiled bearings in a cheap box fan, you are just ****ing on the fire because most types of oil will just gum them up over time. +1 That 10w30 is detergent. I've never seen one that isn't and if it exists it isn't at ACE. |
#24
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
replying to George E. Cawthon, Daniel Alexander wrote:
A Hunter Original has an oil Reservoir -- for full context, visit https://www.homeownershub.com/mainte...il-598502-.htm |
#25
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
replying to gfretwell, NickK3 wrote:
SAE 10W is equivalent to ISO 32, and CarQuest hydraulic jack oil available at advance auto is plain ISO 32 (10W) mineral oil -- for full context, visit https://www.homeownershub.com/mainte...il-598502-.htm |
#26
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
replying to Ron, Vincent F Rakstis wrote:
Reilly Auto Parts has it. You have to ask, it is kept in back, not out with the other oils. About $4 for a quart. I use it for any light oiling jobs, does not get sticky, looks just like sewing machine /' 3 in 1 oils.. CaptVR Some employees are not aware, you may have to insist, they do have it. -- for full context, visit https://www.homeownershub.com/mainte...il-598502-.htm |
#27
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
On 3/14/19 11:44 AM, Vincent F Rakstis wrote:
replying to Ron, Vincent F Rakstis wrote: Reilly Auto Parts has it.Â* You have to ask, it is kept in back, not out with the other oils.Â* About $4 for a quart.Â* I use it for any light oiling jobs, does not get sticky, looks just like sewing machine /' 3 in 1 oils..Â* CaptVR Some employees are not aware, you may have to insist, they do have it. I've used 5W30 synthetic in just about everything. Nothing broken yet. Unless it's some specialty item like a vacuum pump for HVAC work or a compressor used to paint cars, I wouldn't worry about it. |
#28
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
replying to Ron, Bin wrote:
Hey Ron ceiling fan oil should be a non detergent oil that don't gum up the moving parts I have 30 sae, but I think it's too thin 15 to 20 won't run too easily. -- for full context, visit https://www.homeownershub.com/mainte...il-598502-.htm |
#29
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
On Tue, 3 Sep 2019 21:44:03 +0000, Bin
m wrote: replying to Ron, Bin wrote: Hey Ron ceiling fan oil should be a non detergent oil that don't gum up the moving parts I have 30 sae, but I think it's too thin 15 to 20 won't run too easily. Mine specs SAE20 |
#30
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
15 or 20 is thinner than 30 wt.
|
#31
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
On 2019-09-03 6:08 p.m., trader_4 wrote:
15 or 20 is thinner than 30 wt. no |
#32
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
On Tuesday, September 3, 2019 at 9:10:43 PM UTC-4, % wrote:
On 2019-09-03 6:08 p.m., trader_4 wrote: 15 or 20 is thinner than 30 wt. no Wrong, the higher the weight the thicker it is. |
#33
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
On 2019-09-03 6:47 p.m., trader_4 wrote:
On Tuesday, September 3, 2019 at 9:10:43 PM UTC-4, % wrote: On 2019-09-03 6:08 p.m., trader_4 wrote: 15 or 20 is thinner than 30 wt. no Wrong, the higher the weight the thicker it is. told ya , i think we only saw the answer here |
#34
Posted to alt.home.repair
|
|||
|
|||
SAE 10 Wt ND Oil?
3 in 1 oil in the Red bottle is detergent oil, the Blue bottle is non-detergent.
-- For full context, visit https://www.homeownershub.com/mainte...il-598502-.htm |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|