Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Jedd Haas
 
Posts: n/a
Default HVAC units in narrow space?

I am considering installing central air & heat, however, the area next to
my house where I would like to locate the outside coils is narrow: about
32" wide and 10' long. Are there any units that are particularly narrow
(shallow) that could fit this space, with enough room to get around them
and service them?

--
Jedd Haas - Artist
http://www.gallerytungsten.com
http://www.epsno.com
  #2   Report Post  
Steve@carolinabreezehvac
 
Posts: n/a
Default


"Jedd Haas" wrote in message
...
I am considering installing central air & heat, however, the area next to
my house where I would like to locate the outside coils is narrow: about
32" wide and 10' long. Are there any units that are particularly narrow
(shallow) that could fit this space, with enough room to get around them
and service them?



Nope.

Not unless you think Mitsubishi, or the like...even then, I dont think that
there would be enough room for the manufactures specs, or most codes.


--
Jedd Haas - Artist
http://www.gallerytungsten.com
http://www.epsno.com


  #3   Report Post  
m Ransley
 
Posts: n/a
Default

When I put mine in the inspector made me stay 4 feet away from the
neighbors house. I put in a 14 seer condenser which was alot bigger
than the lower seer units.

  #4   Report Post  
Joseph Meehan
 
Posts: n/a
Default

Jedd Haas wrote:
I am considering installing central air & heat, however, the area
next to my house where I would like to locate the outside coils is
narrow: about 32" wide and 10' long. Are there any units that are
particularly narrow (shallow) that could fit this space, with enough
room to get around them and service them?


Your fist problem is why is it that narrow? Is it on the property line?
There are usually local codes covering where you can place the unit. How
well ventilated is the area? Do you have windows on that side. Remember
that noise is going to be louder on both sides due to the restricted space.

--
Joseph Meehan

26 + 6 = 1 It's Irish Math


  #5   Report Post  
HVAC fella
 
Posts: n/a
Default

Maybe you could cut in an access that you could crawl thru, which would
allow you to get to the back side of the a/c unit for servicing ( ? ) .
If by chance , this is a Dog Run you are thinking of putting the a/c
unit in , i wouldnt do that --- a dogs urine is acidic and will eat thru
the fins and tubes of the condensor. I once had a Dog do that to a unit
over several years and it needed replacing -- there were hardly any fins
left on the unit ; never thought id get a replacement a/c job from a
Dog..but hey, im not choosy. I think i even thru a new DogBone into the
estimate.



  #6   Report Post  
m Ransley
 
Posts: n/a
Default

Dog Bone DAVE the Hack Yakker says to cut a hole in your house to
service the AC
Bwaaaaaaaa HaaaaaaaaaaHaaaaaaaaaaaaa atta boi Dave hack em in.

Shut Up Dave

  #7   Report Post  
HVAC fella
 
Posts: n/a
Default

'Dog Bone DAVE the Hack Yakker says to cut a hole in your house to
service the AC'

ME: Again Rans, you twist what i posted. I never said a word about
'cutting a hole in his house' ; the OP said :

'the area next to my house where I would like to locate the outside
coils is narrow: about 32" wide and 10' long. '

Im assuming he has a structure of some kind perhaps a dog run or simular
; if he does, then, making an access would not be out of the question.
If he is just referring to open space measuring 32 inches by 10 feet
long at the side of his house...then, i doubt his local code will allow
him to install the a/c unit so close to (or on) the lot line...if indeed
this area goes up to the lot line.


Did you see my post of a few days ago whereby i suggested we be friends
? Do u think this is possible on your end ? It is on mine.

  #8   Report Post  
HeatMan
 
Posts: n/a
Default

Better watch it Ransley, Dave wants to be your 'friend.'

You better watch out how you bend over...


"HVAC fella" wrote in message
...
'Dog Bone DAVE the Hack Yakker says to cut a hole in your house to
service the AC'

ME: Again Rans, you twist what i posted. I never said a word about
'cutting a hole in his house' ; the OP said :

'the area next to my house where I would like to locate the outside
coils is narrow: about 32" wide and 10' long. '

Im assuming he has a structure of some kind perhaps a dog run or simular
; if he does, then, making an access would not be out of the question.
If he is just referring to open space measuring 32 inches by 10 feet
long at the side of his house...then, i doubt his local code will allow
him to install the a/c unit so close to (or on) the lot line...if indeed
this area goes up to the lot line.


Did you see my post of a few days ago whereby i suggested we be friends
? Do u think this is possible on your end ? It is on mine.



  #9   Report Post  
Steve@carolinabreezehvac
 
Posts: n/a
Default


"HeatMan" wrote in message
...
Better watch it Ransley, Dave wants to be your 'friend.'

You better watch out how you bend over...


DONT DROP THE SOAP!!!!



"HVAC fella" wrote in message
...
'Dog Bone DAVE the Hack Yakker says to cut a hole in your house to
service the AC'

ME: Again Rans, you twist what i posted. I never said a word about
'cutting a hole in his house' ; the OP said :

'the area next to my house where I would like to locate the outside
coils is narrow: about 32" wide and 10' long. '

Im assuming he has a structure of some kind perhaps a dog run or simular
; if he does, then, making an access would not be out of the question.
If he is just referring to open space measuring 32 inches by 10 feet
long at the side of his house...then, i doubt his local code will allow
him to install the a/c unit so close to (or on) the lot line...if indeed
this area goes up to the lot line.


Did you see my post of a few days ago whereby i suggested we be friends
? Do u think this is possible on your end ? It is on mine.




  #10   Report Post  
U will be assimilated
 
Posts: n/a
Default

and BE SURE to squeal like a little piggie....or maybe a hearty
"Baaaahh" will get Dave's nut off real quick



  #11   Report Post  
Steve@carolinabreezehvac
 
Posts: n/a
Default


"U will be assimilated" wrote in message
ups.com...
and BE SURE to squeal like a little piggie....or maybe a hearty
"Baaaahh" will get Dave's nut off real quick


Nah...ya got to be under 18 according to Daves own postings, therefore,
unless you look like you belong in kiddy porn, no ones got a thing to worry
about, altho, after Dave made that post about thinking about having sex with
his customers kids, I would seriously advise anyone in Daves neck of the
woods to either not call him, or shoot him square in the nutsack with a
44mag if he so much as looks at your kids in your home.

  #12   Report Post  
m Ransley
 
Posts: n/a
Default

Sure Dave , If you post the numbers on VS DC "not having a payback " as
you said before, or as you now say " a long time" . My numbers are 5-6
yrs. And If you quit cutting down everything but Goodman.

  #13   Report Post  
Ross Mac
 
Posts: n/a
Default


"Jedd Haas" wrote in message
...
I am considering installing central air & heat, however, the area next to
my house where I would like to locate the outside coils is narrow: about
32" wide and 10' long. Are there any units that are particularly narrow
(shallow) that could fit this space, with enough room to get around them
and service them?

--
Jedd Haas - Artist
http://www.gallerytungsten.com
http://www.epsno.com


I saw an installation, for a manufactured home I stayed in while they were
building my house and I was dodging hurricanes, that was underground. That
is they dug a hole, lined it with galvanized steel and put the air
conditioner in the hole. This left it flush with the ground. I have
absolutely no idea why they did this and it sure didn't deaden the sound.
Maybe that's a posibility for you??....My .02 ....Ross


  #14   Report Post  
Jedd Haas
 
Posts: n/a
Default

Thanks for all the comments. Looks like I will have to put the units in
another location. With that in mind, can the coolant lines be run for
about 60' without excessive losses?

--
Jedd Haas - Artist
http://www.gallerytungsten.com
http://www.epsno.com
  #15   Report Post  
Slumlord
 
Posts: n/a
Default

Jedd Haas wrote:
Thanks for all the comments. Looks like I will have to put the units in
another location. With that in mind, can the coolant lines be run for
about 60' without excessive losses?


How big of a condenser? 60' is a pretty long run. I try to keep 1.5
ton units under 35'.

I didn't see the whole thread.. but have you looked at a thru wall
unit? Another option would be chilled water (its pricey.. but has a lot
of advantages). You could locate the chilled water unit anywhere. Even
on the roof.


  #16   Report Post  
Steve@carolinabreezehvac
 
Posts: n/a
Default


"Jedd Haas" wrote in message
...
Thanks for all the comments. Looks like I will have to put the units in
another location. With that in mind, can the coolant lines be run for
about 60' without excessive losses?


Nope, not unless the manufacturer has allowances for this...your installer
will be able to tell you.
We NEVER run a line more than 50 feet, and that includes any allowances
added into the lineset for oil traps or such.



--
Jedd Haas - Artist
http://www.gallerytungsten.com
http://www.epsno.com


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Petrol in Diesel Engine MartinC UK diy 120 September 5th 05 10:41 PM
Strategies for dealing with stuff/supply/material collections? GTO69RA4 Metalworking 8 April 3rd 04 04:38 PM
crawl space - moisture problem Ferroj Home Repair 4 April 2nd 04 05:33 AM
Crawl Space Insulation ebvolk Home Repair 3 December 15th 03 06:37 AM
Residential HVAC contractor recommendation in Houston, TX? TURTLE Home Repair 6 July 24th 03 08:23 PM


All times are GMT +1. The time now is 05:27 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"