Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Snoblower belt slipping
Ignoramus7928 wrote:
.... This is an old belt. Could it lengthen due to time etc? Would replacing it with a new belt make any sense? The belts I thought would fit, are of wrong size unfortunately. Are they available at auto stores? I need something like 1/2" by 36" V belt. Yes, belts stretch (and, having stretched glaze) w/ time... The owner's manual will provide the correct size (both cross section and length) although unless the present ones are badly deteriorated you should be able to read the size code off the belt. Any decent-sized auto supply should be able to match it, assuming it isn't some special cross section... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Flat Belt Drives | Metalworking | |||
Tool Belt Bloviation | Woodworking | |||
Aluminum foundries in N. Calif? | Metalworking | |||
Changing the belt on a Jet Supersaw | Woodworking | |||
Replacing drive belt on GE dryer. | Home Repair |