Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Snoblower belt slipping
Ignoramus7928 wrote:
.... This is an old belt. Could it lengthen due to time etc? Would replacing it with a new belt make any sense? The belts I thought would fit, are of wrong size unfortunately. Are they available at auto stores? I need something like 1/2" by 36" V belt. Yes, belts stretch (and, having stretched glaze) w/ time... The owner's manual will provide the correct size (both cross section and length) although unless the present ones are badly deteriorated you should be able to read the size code off the belt. Any decent-sized auto supply should be able to match it, assuming it isn't some special cross section... |
#2
|
|||
|
|||
You can also keep a slipping belt in service for awhile longer. Spray
it with "belt dressing". Comes in a can and I keep one in my garage. Berend there for over 20 years but has been used several times over the years. Harry K |
#3
|
|||
|
|||
"Duane Bozarth" wrote in message ... Ignoramus7928 wrote: ... This is an old belt. Could it lengthen due to time etc? Would replacing it with a new belt make any sense? The belts I thought would fit, are of wrong size unfortunately. Are they available at auto stores? I need something like 1/2" by 36" V belt. Yes, belts stretch (and, having stretched glaze) w/ time... The owner's manual will provide the correct size (both cross section and length) although unless the present ones are badly deteriorated you should be able to read the size code off the belt. Any decent-sized auto supply should be able to match it, assuming it isn't some special cross section... For my lawn mower drive belt, I was told by an experienced repair man, to be sure the belt is "power rated". One of two auto supply stores was unable to meet this specification. I presume some belts are made for light duty, like fans, and should be avoided. |
#4
|
|||
|
|||
On 1/6/2005 11:27 AM US(ET), Ignoramus7928 took fingers to keys, and
typed the following: I called our Napa auto parts, they do have 1/2" belts. I will start with that one. i I looked for a long belt for a tractor mounted snowblower a couple of years ago. I inquired at an authorized service for the belt. They did not have on on hand, and cross referenced it with a Gates belt that I could pick up at an automotive store a few miles away. They gave me the part number and told me that the belt would be green cloth covered. Don't know if the green cloth made any more difference than the usual black clothed belts. I did get the green one. -- Bill |
#5
|
|||
|
|||
"Ignoramus7928" wrote in message It now works better, but not as well as it could, throwing snow maybe 8 feet instead of like 20. Sounds like the prostate is going. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Flat Belt Drives | Metalworking | |||
Tool Belt Bloviation | Woodworking | |||
Aluminum foundries in N. Calif? | Metalworking | |||
Changing the belt on a Jet Supersaw | Woodworking | |||
Replacing drive belt on GE dryer. | Home Repair |