Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
HELP,
I have a wooden 1 5/8" thick sliding glass patio door that has no exterior lock cylinder in the outside handle. The door was on the house when I bought it 6 years ago, I don't know what brand it is and I can find no identification on the door anywhere. I want to buy whatever hardware is necessary to allow me to lock the back door up when I leave and use this door as an entry door. I have been to the local Lowes and Home Depot stores and can't find anything that will work. My door is wooden, 1 5/8" "thick",(outside to inside), and the door handle screws are 4" center to center. Has anyone ever had this predicament and know where I can buy the hardware necessary to accomplish this? I can't believe there is not something out there that will work. Thanks for any help, Snyde |
#2
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
Synde,
http://www.addalock.com/burglabar.html Many hardware stores offer a product that clamps on the metal track and can be used to lock the door partially open for pets. These clamps are convenient but are not very secure. If you close your door and carefully drill through both frames where they overlap in the middle you can slide a bolt or nail in the drilled hole to lock the doors. Dave M. |
#3
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
"David Martel" wrote in message
link.net... Synde, http://www.addalock.com/burglabar.html Many hardware stores offer a product that clamps on the metal track and can be used to lock the door partially open for pets. These clamps are convenient but are not very secure. If you close your door and carefully drill through both frames where they overlap in the middle you can slide a bolt or nail in the drilled hole to lock the doors. Dave M. Hi Dave, What I'm looking for is an outside door handle with barrel lock on it, something I can use to lock it with a key from the outside. It locks fine from the inside, I want to use it as an entry door. Thanks for the help Snyde |
#4
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
snydley wrote:
HELP, I have a wooden 1 5/8" thick sliding glass patio door that has no exterior lock cylinder in the outside handle. The door was on the house when I bought it 6 years ago, I don't know what brand it is and I can find no identification on the door anywhere. I want to buy whatever hardware is necessary to allow me to lock the back door up when I leave and use this door as an entry door. I have been to the local Lowes and Home Depot stores and can't find anything that will work. My door is wooden, 1 5/8" "thick",(outside to inside), and the door handle screws are 4" center to center. Has anyone ever had this predicament and know where I can buy the hardware necessary to accomplish this? I can't believe there is not something out there that will work. Thanks for any help, Snyde Google (patio+door+hardware+lock) yields 400,000 hits. Here's one: http://hardware.hardwarestore.com/73...ck-617085.aspx Now this item is designed for the inside, but could be adapted for outside. Anchor it to the frame such that the pin engages the TOP of the door frame. You may have to abandon the plan to incorporate the lock within the handle. Once you do that, other solutions pop up immediately. Such as a hasp and padlock! |
#5
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
"HeyBub" wrote in message
... snydley wrote: HELP, I have a wooden 1 5/8" thick sliding glass patio door that has no exterior lock cylinder in the outside handle. The door was on the house when I bought it 6 years ago, I don't know what brand it is and I can find no identification on the door anywhere. I want to buy whatever hardware is necessary to allow me to lock the back door up when I leave and use this door as an entry door. I have been to the local Lowes and Home Depot stores and can't find anything that will work. My door is wooden, 1 5/8" "thick",(outside to inside), and the door handle screws are 4" center to center. Has anyone ever had this predicament and know where I can buy the hardware necessary to accomplish this? I can't believe there is not something out there that will work. Thanks for any help, Snyde Google (patio+door+hardware+lock) yields 400,000 hits. Here's one: http://hardware.hardwarestore.com/73...ck-617085.aspx Now this item is designed for the inside, but could be adapted for outside. Anchor it to the frame such that the pin engages the TOP of the door frame. You may have to abandon the plan to incorporate the lock within the handle. Once you do that, other solutions pop up immediately. Such as a hasp and padlock! Thanks for the response. No, it's gonna be a lock within the handle or nothing. If I have to I'll get a handle that has a lock in it and "adapt" it to fit. I'm not going to butcher my door just to have a lock on it. I've searched Google too, and found a few handles, not quite the right size, but it looks like I'm gonna have to adapt something. My other idea was to call a locksmith and see if they could do something. Probably cost a lot of $$$ that way though. Snyde |
#6
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
On May 21, 5:54 pm, "snydley" wrote:
"HeyBub" wrote in message ... snydley wrote: HELP, I have a wooden 1 5/8" thick sliding glass patio door that has no exterior lock cylinder in the outside handle. The door was on the house when I bought it 6 years ago, I don't know what brand it is and I can find no identification on the door anywhere. I want to buy whatever hardware is necessary to allow me to lock the back door up when I leave and use this door as an entry door. I have been to the local Lowes and Home Depot stores and can't find anything that will work. My door is wooden, 1 5/8" "thick",(outside to inside), and the door handle screws are 4" center to center. Has anyone ever had this predicament and know where I can buy the hardware necessary to accomplish this? I can't believe there is not something out there that will work. Thanks for any help, Snyde Google (patio+door+hardware+lock) yields 400,000 hits. Here's one: http://hardware.hardwarestore.com/73...ks/keyed-patio... Now this item is designed for the inside, but could be adapted for outside. Anchor it to the frame such that the pin engages the TOP of the door frame. You may have to abandon the plan to incorporate the lock within the handle. Once you do that, other solutions pop up immediately. Such as a hasp and padlock! Thanks for the response. No, it's gonna be a lock within the handle or nothing. If I have to I'll get a handle that has a lock in it and "adapt" it to fit. I'm not going to butcher my door just to have a lock on it. I've searched Google too, and found a few handles, not quite the right size, but it looks like I'm gonna have to adapt something. My other idea was to call a locksmith and see if they could do something. Probably cost a lot of $$$ that way though. Snyde- Hide quoted text - - Show quoted text - Email me a pic of your door off list at and I'll see what I can do for you. We have alot of old parts floating around and I deal with several locksmith supply companies on a regular basis. I'm sure we can find something... Ed |
#7
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
In article ,
"snydley" wrote: What I'm looking for is an outside door handle with barrel lock on it, something I can use to lock it with a key from the outside. It locks fine from the inside, I want to use it as an entry door. Thanks for the help Well, they definitely exist, because my sliding door has one, if I've correctly understood what you are looking for. Here's a pair of pictures of the handle on my sliding door. First, from the inside: http://www.tzs.net/door/inside.jpg and from the outside: http://www.tzs.net/door/outside.jpg So, from the inside it is a normal sliding door latch. Flip the lever, and the hook thingy comes up. Slide the door closed with the hook thingy up, it is will latch, so you can lock the door from outside without using the key. From the outside, it is a normal sliding door handle, except for a barrel lock, which can be used to lock and unlock the door. And yup, I use it for just what you want to get one for--that's my main entry door. -- --Tim Smith |
#8
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
"Tim Smith" wrote in message ... In article , "snydley" wrote: What I'm looking for is an outside door handle with barrel lock on it, something I can use to lock it with a key from the outside. It locks fine from the inside, I want to use it as an entry door. Thanks for the help Well, they definitely exist, because my sliding door has one, if I've correctly understood what you are looking for. Here's a pair of pictures of the handle on my sliding door. First, from the inside: http://www.tzs.net/door/inside.jpg and from the outside: http://www.tzs.net/door/outside.jpg So, from the inside it is a normal sliding door latch. Flip the lever, and the hook thingy comes up. Slide the door closed with the hook thingy up, it is will latch, so you can lock the door from outside without using the key. From the outside, it is a normal sliding door handle, except for a barrel lock, which can be used to lock and unlock the door. And yup, I use it for just what you want to get one for--that's my main entry door. -- --Tim Smith Hi Tim, THAT'S EXACTLY WHAT I WANT!!!!! My door doesn't have a lock on the outside. I've seen a few online, my trouble is that I don't know the "make" of door it is. There's no identification anywhere on it. My door is a wooden door, 1 5/8" thick, the screws are 4" apart center to center. I haven't found a handle/lock assembly that fits that "thick" of a door. I might just have to buy something and try to make it work. Thanks, Snyde |
#9
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
"toolguy" wrote in message
ups.com... On May 21, 5:54 pm, "snydley" wrote: "HeyBub" wrote in message ... snydley wrote: HELP, I have a wooden 1 5/8" thick sliding glass patio door that has no exterior lock cylinder in the outside handle. The door was on the house when I bought it 6 years ago, I don't know what brand it is and I can find no identification on the door anywhere. I want to buy whatever hardware is necessary to allow me to lock the back door up when I leave and use this door as an entry door. I have been to the local Lowes and Home Depot stores and can't find anything that will work. My door is wooden, 1 5/8" "thick",(outside to inside), and the door handle screws are 4" center to center. Has anyone ever had this predicament and know where I can buy the hardware necessary to accomplish this? I can't believe there is not something out there that will work. Thanks for any help, Snyde Google (patio+door+hardware+lock) yields 400,000 hits. Here's one: http://hardware.hardwarestore.com/73...ks/keyed-patio... Now this item is designed for the inside, but could be adapted for outside. Anchor it to the frame such that the pin engages the TOP of the door frame. You may have to abandon the plan to incorporate the lock within the handle. Once you do that, other solutions pop up immediately. Such as a hasp and padlock! Thanks for the response. No, it's gonna be a lock within the handle or nothing. If I have to I'll get a handle that has a lock in it and "adapt" it to fit. I'm not going to butcher my door just to have a lock on it. I've searched Google too, and found a few handles, not quite the right size, but it looks like I'm gonna have to adapt something. My other idea was to call a locksmith and see if they could do something. Probably cost a lot of $$$ that way though. Snyde- Hide quoted text - - Show quoted text - Email me a pic of your door off list at and I'll see what I can do for you. We have alot of old parts floating around and I deal with several locksmith supply companies on a regular basis. I'm sure we can find something... Ed Thanks Ed, I'll do that right now. Snyde |
#10
Posted to alt.home.repair
|
|||
|
|||
Sliding patio door entry lock help needed
On May 21, 8:47 pm, "snydley" wrote:
"toolguy" wrote in message ups.com... On May 21, 5:54 pm, "snydley" wrote: "HeyBub" wrote in message ... snydley wrote: HELP, I have a wooden 1 5/8" thick sliding glass patio door that has no exterior lock cylinder in the outside handle. The door was on the house when I bought it 6 years ago, I don't know what brand it is and I can find no identification on the door anywhere. I want to buy whatever hardware is necessary to allow me to lock the back door up when I leave and use this door as an entry door. I have been to the local Lowes and Home Depot stores and can't find anything that will work. My door is wooden, 1 5/8" "thick",(outside to inside), and the door handle screws are 4" center to center. Has anyone ever had this predicament and know where I can buy the hardware necessary to accomplish this? I can't believe there is not something out there that will work. Thanks for any help, Snyde Google (patio+door+hardware+lock) yields 400,000 hits. Here's one: http://hardware.hardwarestore.com/73...ks/keyed-patio... Now this item is designed for the inside, but could be adapted for outside. Anchor it to the frame such that the pin engages the TOP of the door frame. You may have to abandon the plan to incorporate the lock within the handle. Once you do that, other solutions pop up immediately. Such as a hasp and padlock! Thanks for the response. No, it's gonna be a lock within the handle or nothing. If I have to I'll get a handle that has a lock in it and "adapt" it to fit. I'm not going to butcher my door just to have a lock on it. I've searched Google too, and found a few handles, not quite the right size, but it looks like I'm gonna have to adapt something. My other idea was to call a locksmith and see if they could do something. Probably cost a lot of $$$ that way though. Snyde- Hide quoted text - - Show quoted text - Email me a pic of your door off list at and I'll see what I can do for you. We have alot of old parts floating around and I deal with several locksmith supply companies on a regular basis. I'm sure we can find something... Ed Thanks Ed, I'll do that right now. Snyde If the pic Tim sent is what you need, It's Primeline #C-1041. This is the outside trim only. It matches your screw spacing, and the tailpiece on the lock cylinder is notched so you can break it off at the length you need for your door. When you send the pic for verification we can track down the exact match inside and out if necessary. I'll be happy to send you what you need, or I can get you in touch with a local hardware store that can help. Ed |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Backwards sliding door lock | Home Repair | |||
jammed patio door lock | UK diy | |||
Sliding patio door track | Home Repair | |||
Sliding patio door | Home Repair | |||
Patio door lock woes | UK diy |