Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
ConcreteFinishing&StuccoGuy
 
Posts: n/a
Default

In a condo its possible that the slip forming was removed prematurely. An
inch dip over ten feet could also be the result of "a tired finisher". If
there are no cracks i suggest you go and find something else to worry
about--try global warming or killer bees.

--


Remove the obvious to reply. Experienced and reliable
Concrete Finishing and Synthetic Stucco application in the GTA.
"DanG" wrote in message
news:1QThe.34799$yV4.12333@okepread03...
You have a fairly simple one to fix. You need some floor stone.
Here come the choices:
gypsum based / cement based / self leveling

I prefer cement based products as they are not affected by water
and there are no incompatibilities with adhesives.

There are several manufacturers. Here is a good one:
http://www.mapei.com/MapeiAmericas/e...ucts_line3.htm

(top posted for your convenience)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Keep the whole world singing . . . .
DanG (remove the sevens)




"fh101" wrote in message
...
I recently moved into a second story condo and have encountered
what
might be a serious problem. When I was looking at the condo, I
noticed a gradual dip in the middle of the carpeted living room
(approximately 10' X 10' and perhaps 1 inch deep at the center).
We
hired a building inspector to check it out and were told that
the
plywood floorboards were slipping due to settling, though the
condo
was structurally sound. He also said that this could easily be
fixed
at a minimal cost by pulling back the plywood and reinforcing
the
frame with some 4X4's. Well, today I peeled back the carpet to
take
a look and discovered that the subfloor isn't plywood, it's
concrete!
What the ?!?

Anyways, the condo is about 20 years old and the previous owners
assured me that the dip hasn't increased in the past 6 years or
so.
Assuming that the frame is in decent shape, what would be the
best
(and most economical) way of leveling the floor? I only plan on
living here for another 3-5 years and don't want to spend too
much in
improvements. At the same time, I'd hate for my floor to
collapse
onto my neighbors downstairs. Any advice? Thank you in
advance.







 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Concrete mix - volume question [email protected] UK diy 3 April 25th 05 01:40 PM
How to repair an uneven concrete subfloor? poofy Home Repair 18 April 19th 05 04:17 PM
Newbie Question on Spur Centers buck Woodturning 11 November 21st 04 09:22 PM
Newbie Compressor Question GTANNENB Woodworking 7 October 21st 04 02:50 AM
Newbie RAS question mac davis Woodworking 14 October 7th 04 06:25 PM


All times are GMT +1. The time now is 01:06 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"