Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
In 6 weeks to 2 months I'm going to help my brother put up drywall in the
house he's building. My HF and 13.2 v "FireStorm" cordless drill/drivers aren't up to the task of putting drywall screws into 2x4's so (Yipee!!) I'm looking for something I can use for (hopefully) many years. Sunday afternoon I spent an hour or so fondling drivers at the local HD. The 18 v DeWalt HD/D/D feels pretty good in my hand, but I'm wondering about the NiCad / Other battery technology issues. I'd also like to stay "mainstream" so it will be easier to get replacement batteries in the years to come. (The 13.2 FireStorm batteries are available factory-only, and really expensive.) I've also seen the "Drywall screws on a belt" at Lowe's and wonder what sort of driver / attachment is needed to use these. Thoughts? Thanks! -- Mark |
#2
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
Keep in mind that (typically) more power = more weight. In particular, if
you're going to be working over your head (i.e. hanging ceiling drywall), lighter would definately be better. I've got the DeWalt 18v drill (not hammer drill), and am quite happy with it. I'd buy it again. Clint "Mark Jerde" wrote in message news:5ePsg.19019$LS6.310@trnddc03... In 6 weeks to 2 months I'm going to help my brother put up drywall in the house he's building. My HF and 13.2 v "FireStorm" cordless drill/drivers aren't up to the task of putting drywall screws into 2x4's so (Yipee!!) I'm looking for something I can use for (hopefully) many years. Sunday afternoon I spent an hour or so fondling drivers at the local HD. The 18 v DeWalt HD/D/D feels pretty good in my hand, but I'm wondering about the NiCad / Other battery technology issues. I'd also like to stay "mainstream" so it will be easier to get replacement batteries in the years to come. (The 13.2 FireStorm batteries are available factory-only, and really expensive.) I've also seen the "Drywall screws on a belt" at Lowe's and wonder what sort of driver / attachment is needed to use these. Thoughts? Thanks! -- Mark |
#3
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
"Mark Jerde" wrote in message news:5ePsg.19019$LS6.310@trnddc03... In 6 weeks to 2 months I'm going to help my brother put up drywall in the house he's building. My HF and 13.2 v "FireStorm" cordless drill/drivers aren't up to the task of putting drywall screws into 2x4's so (Yipee!!) I'm looking for something I can use for (hopefully) many years. Sunday afternoon I spent an hour or so fondling drivers at the local HD. The 18 v DeWalt HD/D/D feels pretty good in my hand, but I'm wondering about the NiCad / Other battery technology issues. I'd also like to stay "mainstream" so it will be easier to get replacement batteries in the years to come. (The 13.2 FireStorm batteries are available factory-only, and really expensive.) I've also seen the "Drywall screws on a belt" at Lowe's and wonder what sort of driver / attachment is needed to use these. Thoughts? Thanks! If you are going to be driving srywall screw screws into drywall I suggest a corded drywall drill. Typically a corded dry wall model will run at 4000 rpm and some times faster and insert the screws faster. Typically the battery operated model drills do not run any where near that speed. Faster battery powered ones tend to be 1200 to 2000 rpm. |
#4
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
Mark Jerde wrote: In 6 weeks to 2 months I'm going to help my brother put up drywall in the house he's building. My HF and 13.2 v "FireStorm" cordless drill/drivers aren't up to the task of putting drywall screws into 2x4's so (Yipee!!) I'm looking for something I can use for (hopefully) many years. I'd also recommend getting a corded screw driver. I bought one of those cordless Senco drivers. It's ok for drywall, but the corded one (Dewalt if it matters) drives the screws in faster, has more torque, and I don't have to worry about the battery getting weak. It's a little more trouble to drag an extension cord around, but worth it, IMO. Or you could just buy/use a regular corded drill. If I had it to do over again, I'm not sure I'd buy a dedicated screw gun again. |
#5
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
If I had it to do
over again, I'm not sure I'd buy a dedicated screw gun again. SSsssshhhuuusssssssshhhh!!! This is my chance to ditch the nearly-dead 13.2 FireStorm for something "real", like a DW! g -- Mark |
#6
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
"Mark Jerde" wrote in
news:eYXsg.19287$LS6.8900@trnddc03: If I had it to do over again, I'm not sure I'd buy a dedicated screw gun again. SSsssshhhuuusssssssshhhh!!! This is my chance to ditch the nearly-dead 13.2 FireStorm for something "real", like a DW! g -- Mark Look at HD for a lifetime Ridgid warranty... That's one I'd consider buying first... I've been sold on a Makita ever since I picked one up. It was love at first lift. It felt much lighter when in usage position, obviously transfering the weight to my body effectively. Oh, and you need two drill/drivers. One small 9.6 volt one and an 18 volt one. ;-) The 9.6v will do most the little stuff just fine and the 18v will handle bigger tasks like 2" and 3" screws. (You can also chuck a drill bit in one and a driving bit in the other.) Puckdropper -- Wise is the man who attempts to answer his question before asking it. To email me directly, send a message to puckdropper (at) fastmail.fm |
#7
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
"Mark Jerde" wrote in message news:eYXsg.19287$LS6.8900@trnddc03... If I had it to do over again, I'm not sure I'd buy a dedicated screw gun again. SSsssshhhuuusssssssshhhh!!! This is my chance to ditch the nearly-dead 13.2 FireStorm for something "real", like a DW! I ve put in a LOT of Drywall screws with my DeWalt 12V cordless and its light enough to hold over your head. The two battery set-up will give you enough juice to work all day. I built a house with the DW and ran over 10,000 screws with it ( and an old Craftsman 9.6V) Theyre under $ 100 these days. I just bought a Ryobi P220 18V 3 spd hammerdrill at HD for 49.97/ chgr 19.97/ 2 batts 39.97..whole works for $ 110 and it wails !..but try and hold THAT baby over yer head for a while.. |
#8
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
On Wed, 12 Jul 2006 06:29:11 GMT, "Rudy"
wrote: "Mark Jerde" wrote in message news:eYXsg.19287$LS6.8900@trnddc03... If I had it to do over again, I'm not sure I'd buy a dedicated screw gun again. SSsssshhhuuusssssssshhhh!!! This is my chance to ditch the nearly-dead 13.2 FireStorm for something "real", like a DW! I ve put in a LOT of Drywall screws with my DeWalt 12V cordless and its light enough to hold over your head. The two battery set-up will give you enough juice to work all day. I built a house with the DW and ran over 10,000 screws with it ( and an old Craftsman 9.6V) Theyre under $ 100 these days. Yes, but have you ever tried a screw gun? I used to think these cordless drills were one of the wonders of the universe, and maybe they are, but not for all things. We had a pro drywall installer come in and show us (Habitat) a few tricks. Also had one of those nifty screw drivers. The difference was notable and I even talked him into loaning it to us (he was coming back to help out more than once). The screw gun is lighter and more suited to driving screws than a cordless drill. A cordless drill will work, and if you can only get one tool, than the drill is more versatile. But, if you can swing both, (and I've seen the screwguns for under $100), go for the screw gun for your drywall. Renata I just bought a Ryobi P220 18V 3 spd hammerdrill at HD for 49.97/ chgr 19.97/ 2 batts 39.97..whole works for $ 110 and it wails !..but try and hold THAT baby over yer head for a while.. |
#9
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
Mark Jerde wrote:
If I had it to do over again, I'm not sure I'd buy a dedicated screw gun again. SSsssshhhuuusssssssshhhh!!! This is my chance to ditch the nearly-dead 13.2 FireStorm for something "real", like a DW! g -- Mark Your at least using the 13.2v version After bringing home a 6 amp corded Dewalt I took a look at my B&D cordless and it says 6v. No wonder it does not do much. Big difference! |
#10
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
Mark Jerde wrote:
In 6 weeks to 2 months I'm going to help my brother put up drywall in the house he's building. My HF and 13.2 v "FireStorm" cordless drill/drivers aren't up to the task of putting drywall screws into 2x4's so (Yipee!!) I'm looking for something I can use for (hopefully) many years. Can't help you with the drywall, but have the 18VDC DeWalt drill for 8-9 years now. Replaced the batteries, but otherwise, it doesn't owe me anything. Lew |
#11
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
Can't help you with the drywall, but have the 18VDC DeWalt drill for 8-9
years now. Replaced the batteries, but otherwise, it doesn't owe me anything. Thanks for the feedback. I appreciate it. -- Mark |
#12
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
My wife got me a backup 14.4 Volt Makita Drill Set for Christmas. It came
packaged with the smaller 14.4Volt impact driver. It weighs a lot less than the drill motor and does a great job. I just set more than 2,000 2" deck screws during a privacy fence project and the biggest problem was getting my finger off of the trigger before I drove the screw through the cedar fence boards. Best part is it is lightweight. RonB |
#13
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
"RonB" wrote in message news:caRsg.7400$nK.3291@dukeread05... My wife got me a backup 14.4 Volt Makita Drill Set for Christmas. It came packaged with the smaller 14.4Volt impact driver. It weighs a lot less than the drill motor and does a great job. I just set more than 2,000 2" deck screws during a privacy fence project and the biggest problem was getting my finger off of the trigger before I drove the screw through the cedar fence boards. Best part is it is lightweight. Thanks. I haven't crossed Makita because of their color.... g -- Mark |
#14
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
"Mark Jerde" wrote in message news:5ePsg.19019$LS6.310@trnddc03... In 6 weeks to 2 months I'm going to help my brother put up drywall in the house he's building. My HF and 13.2 v "FireStorm" cordless drill/drivers aren't up to the task of putting drywall screws into 2x4's so (Yipee!!) I'm looking for something I can use for (hopefully) many years. Sunday afternoon I spent an hour or so fondling drivers at the local HD. The 18 v DeWalt HD/D/D feels pretty good in my hand, but I'm wondering about the NiCad / Other battery technology issues. I'd also like to stay "mainstream" so it will be easier to get replacement batteries in the years to come. (The 13.2 FireStorm batteries are available factory-only, and really expensive.) I've also seen the "Drywall screws on a belt" at Lowe's and wonder what sort of driver / attachment is needed to use these. Thoughts? Thanks! -- Mark I have a Hilti SD4500 http://www.us.hilti.com/holus/module...jsp?OID=-16781 It has an attachment that takes the screw strips. It makes for attaching drywall very fast. Others like Milwaukee make a version as well. However, unless you plan on hanging a bunch-O-rock - just nail or use a regular battery drill. The only problem with using a regular drill to drive drywall screws is they usually set them too deep, tearing the paper and thus reducing the holding power. Dave Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#15
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
"Teamcasa" wrote in message ... The only problem with using a regular drill to drive drywall screws is they usually set them too deep, tearing the paper and thus reducing the holding power. There is a 4 or 5 dollar bit you can buy for a regular corded drill that works like the dry wall screw guns bits and it prevents over driving. Normally found where carious drill screw bits are sold. |
#16
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
Leon wrote:
"Teamcasa" wrote in message ... The only problem with using a regular drill to drive drywall screws is they usually set them too deep, tearing the paper and thus reducing the holding power. There is a 4 or 5 dollar bit you can buy for a regular corded drill that works like the dry wall screw guns bits and it prevents over driving. Normally found where carious drill screw bits are sold. LV has them: http://www.leevalley.com/wood/page.a...at=1,180,42240 $5 CDN, likely cheaper in the US. They also have a lifter for the bottom of the sheet, which has saved my life a few times: http://www.leevalley.com/wood/page.a...=1,43456,43389 Tanus -- This is not really a sig. |
#17
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
On Tue, 11 Jul 2006 15:13:05 GMT, "Mark Jerde"
wrote: In 6 weeks to 2 months I'm going to help my brother put up drywall in the house he's building. My HF and 13.2 v "FireStorm" cordless drill/drivers aren't up to the task of putting drywall screws into 2x4's so (Yipee!!) I'm looking for something I can use for (hopefully) many years. Sunday afternoon I spent an hour or so fondling drivers at the local HD. The 18 v DeWalt HD/D/D feels pretty good in my hand, but I'm wondering about the NiCad / Other battery technology issues. I'd also like to stay "mainstream" so it will be easier to get replacement batteries in the years to come. (The 13.2 FireStorm batteries are available factory-only, and really expensive.) I've also seen the "Drywall screws on a belt" at Lowe's and wonder what sort of driver / attachment is needed to use these. Thoughts? Thanks! -- Mark I'm with the guys above who recommend a corded model. . I believe the ones on the belt are Hilti - there might be others |
#18
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
|
#19
Posted to rec.woodworking
|
|||
|
|||
I Have An Excuse! Which Cordless Hammerdrill / Drill / Driver?
Hard to credit that the 13.2 Firestorm is too gutless to put in drywall screws. We used my 9.6V and my 12V Panasonic concurrently and they both did the job without complaints. Well, maybe that explains the huge difference in price grin. Yeergh! Sorry to bust yer bubble but I slunk around the innernet and finally found a place to call eht, er, hte, er, the FireStorm 13.2 v folks. After spending about $100 of my dollerares they sent me a charger and a new battery, but I only set about 1.75 screws into the top of an (I'm Sorry!) IKEA dresser that SHMBO bought before all the 13.2 little electrons were spent, lying in the gutter gasping their last. Couldanta have been more than $5.00 per screw... (Insert favorite _______ joke here!) I'd ruther take up smoking Kuban ceegars, lighting them with hunndert-dollars bills, than send the FireSTORM annother hunndret of minea dollardes, da jo whatta meen? -- Mark |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Viper 18V Cordless drill (great service) | Woodworking | |||
Best cordless drill? | Woodworking | |||
drill bit sharpening | Metalworking | |||
Makita cordless drill vs. Makita cordless drill | Woodworking | |||
What constitutes reasonable wear (cordless drill) | UK diy |