Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Bandsaw Problems
I'm hoping someone might have some advice.
I recently purchased a Ridgid Bandsaw, and am experiencing problems with the rubber strips on the wheels. After installing a 1/2 blade for some minor resawing, when applying proper tension, (according to the scale on the back) the rubber bands track off the wheel, and jam against the frame. I'm wondering if they need replacement? (they have less than 1/2 hr use) or if maybe the scale is reading wrong? (Too much tension?) Thanks. Mike |
#2
Posted to rec.woodworking
|
|||
|
|||
Bandsaw Problems
"MikeMac" wrote in message I'm hoping someone might have some advice. I recently purchased a Ridgid Bandsaw, and am experiencing problems with the rubber strips on the wheels. After installing a 1/2 blade for some minor resawing, when applying proper tension, (according to the scale on the back) the rubber bands track off the wheel, and jam against the frame. I'm wondering if they need replacement? (they have less than 1/2 hr use) or if maybe the scale is reading wrong? (Too much tension?) Sight unseen it's just a guess, but it sure sounds like the wrong size tires for the band saw wheels. In any event, tension should not cause this and it warrants a call to customer/warranty service. -- www.e-woodshop.net Last update: 12/13/05 |
#3
Posted to rec.woodworking
|
|||
|
|||
Bandsaw Problems
when applying proper tension, (according to the scale on the back) the rubber bands track off the wheel, and jam against the frame. Sounds like a made in China deal. Walt Conner |
#4
Posted to rec.woodworking
|
|||
|
|||
Bandsaw Problems
Hi,
In addition to what the others have said DO NOT trust the tension scale on ANY bandsaw. The spring wears over time, blades are different from manufacturer to manufacturer and model to model, etc. etc. Iturra Designs (1-888-722-7078) sells several blade tension meters. Getting one is a good investment. They're also working on an inexpensive tension meter that most of us can afford. Don't know if they've come out with it yet. Aside from using a tension meter I've been using the "pluck" method. But, instead of listening for a particular musical "note" I listen for a certain quality of the sound. First I clear the guides, then I turn the tension knob while plucking the blade till I hear it go from a loose "twang" to a nice tight "ping". Then I tighten the knob about a half turn. This gets it pretty close. This method works best for low tension blades like Timberwolf and not so good for high tension baldes like Lennox. The flutter method is useless in my opinion. It's just as good as using the tension scale. Hope this helps, Layne On Sat, 28 Jan 2006 06:57:52 -0500, "MikeMac" wrote: I'm hoping someone might have some advice. I recently purchased a Ridgid Bandsaw, and am experiencing problems with the rubber strips on the wheels. After installing a 1/2 blade for some minor resawing, when applying proper tension, (according to the scale on the back) the rubber bands track off the wheel, and jam against the frame. I'm wondering if they need replacement? (they have less than 1/2 hr use) or if maybe the scale is reading wrong? (Too much tension?) |
#5
Posted to rec.woodworking
|
|||
|
|||
Bandsaw Problems
I'm wondering if the wheel is so out of allignment the the blade "roots" the
tires off? Turn the wheels by hand and make sure the blade is centered on the tires. Something is sure screwed up. Jim "MikeMac" wrote in message ... I'm hoping someone might have some advice. I recently purchased a Ridgid Bandsaw, and am experiencing problems with the rubber strips on the wheels. After installing a 1/2 blade for some minor resawing, when applying proper tension, (according to the scale on the back) the rubber bands track off the wheel, and jam against the frame. I'm wondering if they need replacement? (they have less than 1/2 hr use) or if maybe the scale is reading wrong? (Too much tension?) Thanks. Mike |
#6
Posted to rec.woodworking
|
|||
|
|||
Bandsaw Problems
Or maybe they're inside-out?
Swingman wrote: Sight unseen it's just a guess, but it sure sounds like the wrong size tires for the band saw wheels. In any event, tension should not cause this and it warrants a call to customer/warranty service. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Linux is Driving me $#@!!!! nutz!!! | Metalworking | |||
Bandsaw question... | Metalworking | |||
damn, a bandsaw! | Woodturning | |||
selling a bandsaw to someone who doesn't do curves... | Woodworking | |||
Surprising Review - Chinese Delta 14" Bandsaw 28-206/276 | Woodworking |