Home |
Search |
Today's Posts |
|
Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.woodturning
|
|||
|
|||
Jet 1442 bowl extension
Long time no post, but I know I've seen an accessory system for the
Jet 1442 lathe for turning bowls. It essentially turns the headstock at 90 degrees to the lathe bed and has a separate tool rest. What in heck is this thing called, and where can I get one? TIA, Phil |
#2
Posted to rec.crafts.woodturning
|
|||
|
|||
Jet 1442 bowl extension
In article
, Phil Crow wrote: Long time no post, but I know I've seen an accessory system for the Jet 1442 lathe for turning bowls. It essentially turns the headstock at 90 degrees to the lathe bed and has a separate tool rest. What in heck is this thing called, and where can I get one? Outboard adapter. A quick Google search suggests it should come with the lathe. -- "I think all right-thinking people in this country are sick and tired of being told that ordinary, decent, people are fed up in this country with being sick and tired. I am certainly not, and I'm sick and tired of being told that I am." |
#3
Posted to rec.crafts.woodturning
|
|||
|
|||
Jet 1442 bowl extension
Phil Crow wrote:
Long time no post, but I know I've seen an accessory system for the Jet 1442 lathe for turning bowls. It essentially turns the headstock at 90 degrees to the lathe bed and has a separate tool rest. What in heck is this thing called, and where can I get one? TIA, Phil Phil, if you want the cheap way to do this, the Harbor Freight 12x36 lathe has an extension. The good thing is, it fits the Jet 1446 banjo (I know, I have one). Click on the Download Manual and the part you want is on the exploded diagram and is "M38" Call their Tech Support and order it. It will be less than $10.00. While you are at it, order a couple of Tool Rests also. When they arrive (perfect fits for the Jet, BTW) cut them to lenght (I now have a 4", and 8" and a 12"). You will have the entire order (extension and two tool rests) for less than you would pay for the Jet extension alone. FWIW Deb |
#4
Posted to rec.crafts.woodturning
|
|||
|
|||
Jet 1442 bowl extension
My lathe uses a left hand plate or chuck on the outboard end of the
spindle and the tool bar is on a stand. I don't have the setup myself, but that is how it was designed. Martin On 9/4/2012 7:03 AM, Dave Balderstone wrote: In article , Phil Crow wrote: Long time no post, but I know I've seen an accessory system for the Jet 1442 lathe for turning bowls. It essentially turns the headstock at 90 degrees to the lathe bed and has a separate tool rest. What in heck is this thing called, and where can I get one? Outboard adapter. A quick Google search suggests it should come with the lathe. |
#5
Posted to rec.crafts.woodturning
|
|||
|
|||
Jet 1442 bowl extension
Phil Crow wrote:
Long time no post, but I know I've seen an accessory system for the Jet 1442 lathe for turning bowls. It essentially turns the headstock at 90 degrees to the lathe bed and has a separate tool rest. What in heck is this thing called, and where can I get one? TIA, Phil Phil, as for how to use the tool rest extension. Unlock the head and slide it down the ways. Take the tailstock off, move the banjo to the other end of the lathe. Insert the extension in the banjo and adjust accordingly. Of course you fully realize this is only necessary if you are turning bowls larger than 14", right? Anything smaller than that you turn between centers, make a tenon, mount on the chuck and go from there. In turning outboard, you need stock that has a waste block mounted on it so you can turn a tenon or recess to mount the chuck on. Also, keep your speed as slow as possible, at least until you get it balanced. Deb |
#6
Posted to rec.crafts.woodturning
|
|||
|
|||
Jet 1442 bowl extension
On Mon, 3 Sep 2012 19:07:14 -0700 (PDT), Phil Crow
wrote: Long time no post, but I know I've seen an accessory system for the Jet 1442 lathe for turning bowls. It essentially turns the headstock at 90 degrees to the lathe bed and has a separate tool rest. What in heck is this thing called, and where can I get one? TIA, Phil This is for turning bowls larger than 14" diameter on your lathe... You know that, right?? It's called an outboard tool rest... Available as an option from Jet.. People that I've talked to don't like it or the cost.. I think it was about $300 when I had my 1442VS.. Most people prefer a freestanding tool rest, looks like a large automotive safety stand with a tool rest.... These can be purchased or built... I really wouldn't recommend this unless you really need to turn LARGE objects and have a lot of experience turning bowls.. YMWV |
#7
Posted to rec.crafts.woodturning
|
|||
|
|||
Jet 1442 bowl extension
Large bowl turners make their own or buy lathes designed for such.
They don't have ways just a deep head and heavy duty. The large U frame has a tail stock when wanted. Most are just the head. I suggest searching for bowl turning lathe. Use Google naturally. Martin On 9/12/2012 12:59 AM, Mac Davis wrote: On Mon, 3 Sep 2012 19:07:14 -0700 (PDT), Phil Crow wrote: Long time no post, but I know I've seen an accessory system for the Jet 1442 lathe for turning bowls. It essentially turns the headstock at 90 degrees to the lathe bed and has a separate tool rest. What in heck is this thing called, and where can I get one? TIA, Phil This is for turning bowls larger than 14" diameter on your lathe... You know that, right?? It's called an outboard tool rest... Available as an option from Jet.. People that I've talked to don't like it or the cost.. I think it was about $300 when I had my 1442VS.. Most people prefer a freestanding tool rest, looks like a large automotive safety stand with a tool rest.... These can be purchased or built... I really wouldn't recommend this unless you really need to turn LARGE objects and have a lot of experience turning bowls.. YMWV |
#8
Posted to rec.crafts.woodturning
|
|||
|
|||
Jet 1442 bowl extension
On 9/14/2012 10:09 PM, Martin Eastburn wrote:
Large bowl turners make their own or buy lathes designed for such. They don't have ways just a deep head and heavy duty. The large U frame has a tail stock when wanted. Most are just the head. I suggest searching for bowl turning lathe. Use Google naturally. Martin Yeah but if you just want to do one now and then the extension is s good idea. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Jet-1442 VSK | Woodturning | |||
Jet 1442 | Woodturning | |||
Jet 1442 | Woodturning | |||
Jet 1442 Extension Bed | Woodturning |