Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Part P (again)
Hi,
I've been following the threads on here regarding Part P and its effects on DIY work on-and-off since late 2002, and I thought I now understood exactly what the situation was. But today on the Rospa site I see the following unqualified statement: quote Notification will not be required if – *.... *... * DIY work that follows the IEE guidance or that in the listed DIY manuals based on BS 7671 and IEE. /quote (http://www.rospa.org.uk/productsafet...electrical.htm, section 3.2.5 ) Is this correct? This would imply that one **can** do major works as long as 7671 is followed. Comments anyone ? p.s. As it is a topic that has been done over and over, an I propose Part P and electrical DIY as an addition to the FAQ? "coherers" |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
DVI input specification of Pioneer PDP504PE (The screen part of the Pioneer PDP504HDE) | Electronics Repair | |||
Still looking for Mitsubishi VCR part # !!! | Electronics Repair | |||
NOKIA TV PART URGENTLY NEEDED | Electronics Repair | |||
How do I figure out the diameters so I will have a nice screw fit? | Metalworking | |||
Old Delta drill press part?? | Metalworking |