 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
How to slacken single spout mixer tap
It is normal taps hot & cold (kitchen) with a central spout. The spout
has become stiff to swivel so was planning to take off and clean to see if this eases it. It has a grub screw at the rear which I have taken out but still I cannot release the spout, I presume it is just a tight fit. Any ideas. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Removing spout from Framke mixer tap | UK diy | |||
| mixer tap spout | UK diy | |||
| slacken compression fitting to bleed air ... BANG! | UK diy | |||
| Mixer tap (kitchen sink): spout getting 'heavy' to swivel | UK diy | |||
| connecting single hole kitchen mixer tap to water pipes | UK diy | |||
Threaded Mode
