Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth the extracost?
I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that
Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? |
#3
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth theextra cost?
On Mon, 18 Jul 2016 14:32:19 +0100, nospam wrote:
I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? I have the Bosch AKE 40-185. 1800W 40 cms. Does me very well for my limited use. Do buy a chain sharpener as well because a sharp chain makes an enormous difference to the ease of cutting. Previously I had a B&D where you had to take a side panel off and undo a nut with a spanner and use a screwdriver to tension the chain. Pain in the bum. This one has a big wheel on the side, with one part being the locking mechanism and the other being the adjuster. Much easier. Cheers Dave R -- Windows 8.1 on PCSpecialist box |
#4
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth the
in 1507957 20160719 154026 David wrote:
On Mon, 18 Jul 2016 14:32:19 +0100, nospam wrote: I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? I have the Bosch AKE 40-185. 1800W 40 cms. Does me very well for my limited use. Do buy a chain sharpener as well because a sharp chain makes an enormous difference to the ease of cutting. I send my chains to a place in Lancashire. Back in 3-4 days, very sharp, for just a few pounds. Previously I had a B&D where you had to take a side panel off and undo a nut with a spanner and use a screwdriver to tension the chain. Pain in the bum. This one has a big wheel on the side, with one part being the locking mechanism and the other being the adjuster. Much easier. Cheers |
#5
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth the
On Wed, 20 Jul 2016 07:43:33 BST, Bob Martin
wrote: snip Does me very well for my limited use. Do buy a chain sharpener as well because a sharp chain makes an enormous difference to the ease of cutting. I send my chains to a place in Lancashire. Back in 3-4 days, very sharp, for just a few pounds. When daughter worked for a local Tree Surgery company they were all quite paternal about sharpening their own saws. One day when they got back to the yard early, daughter offered to sharpen any saws (along with doing her own) and a couple said 'yes'. When they came back the next day they were both enthusing just how sharp they were and wanted her to do it all the time (and she didn't mind as it was something she enjoyed and was easier than splitting logs or shoveling chip). ;-) At the time she was doing the sharpening by hand but I think she also uses one of those bench mounted sharpeners and suggests they are 'ok'. Cheers, T i m |
#6
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth the
On Wed, 20 Jul 2016 07:43:33 +0000, Bob Martin wrote:
in 1507957 20160719 154026 David wrote: On Mon, 18 Jul 2016 14:32:19 +0100, nospam wrote: I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? I have the Bosch AKE 40-185. 1800W 40 cms. Does me very well for my limited use. Do buy a chain sharpener as well because a sharp chain makes an enormous difference to the ease of cutting. I send my chains to a place in Lancashire. Back in 3-4 days, very sharp, for just a few pounds. Previously I had a B&D where you had to take a side panel off and undo a nut with a spanner and use a screwdriver to tension the chain. Pain in the bum. This one has a big wheel on the side, with one part being the locking mechanism and the other being the adjuster. Much easier. Cheers Must slow you down if you are half way through a cutting session and the chain needs sharpening. I assume that you have two chains (at least) so you can use one and send one off? Cheers Dave R -- Windows 8.1 on PCSpecialist box |
#7
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth the
David Wrote in message:
On Wed, 20 Jul 2016 07:43:33 +0000, Bob Martin wrote: in 1507957 20160719 154026 David wrote: On Mon, 18 Jul 2016 14:32:19 +0100, nospam wrote: I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? I have the Bosch AKE 40-185. 1800W 40 cms. Does me very well for my limited use. Do buy a chain sharpener as well because a sharp chain makes an enormous difference to the ease of cutting. I send my chains to a place in Lancashire. Back in 3-4 days, very sharp, for just a few pounds. Previously I had a B&D where you had to take a side panel off and undo a nut with a spanner and use a screwdriver to tension the chain. Pain in the bum. This one has a big wheel on the side, with one part being the locking mechanism and the other being the adjuster. Much easier. Cheers Must slow you down if you are half way through a cutting session and the chain needs sharpening. I assume that you have two chains (at least) so you can use one and send one off? Cheers Dave R I'd suggest 4 chains - 1 good one on the saw, 1 fresh one ready to go onto the saw, 2 waiting to be sharpened/away at a sharpeners. They are cheap enough on amazon /eBay. -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#8
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth the
in 1508206 20160720 105923 David wrote:
On Wed, 20 Jul 2016 07:43:33 +0000, Bob Martin wrote: in 1507957 20160719 154026 David wrote: On Mon, 18 Jul 2016 14:32:19 +0100, nospam wrote: I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? I have the Bosch AKE 40-185. 1800W 40 cms. Does me very well for my limited use. Do buy a chain sharpener as well because a sharp chain makes an enormous difference to the ease of cutting. I send my chains to a place in Lancashire. Back in 3-4 days, very sharp, for just a few pounds. Previously I had a B&D where you had to take a side panel off and undo a nut with a spanner and use a screwdriver to tension the chain. Pain in the bum. This one has a big wheel on the side, with one part being the locking mechanism and the other being the adjuster. Much easier. Cheers Must slow you down if you are half way through a cutting session and the chain needs sharpening. I assume that you have two chains (at least) so you can use one and send one off? Yes, two chain saws and two chains for each! |
#9
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth theextra cost?
On 18/07/2016 17:25, jim wrote:
Wrote in message: I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? The higher priced one has toolless assembly & tensioning, the cheaper is more traditional nuts & spanners. I've had both and I wouldn't pay 50 quid odd more for it :-) I'd be surprised if the extra 200w would make a lot of difference in normal usage for an electric chainsaw. It looks like the design has changed because they both now have tool-less assembly and tensioning. I went for the cheaper one - time will tell. |
#10
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth theextra cost?
On 19/07/2016 15:40, David wrote:
On Mon, 18 Jul 2016 14:32:19 +0100, nospam wrote: I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? I have the Bosch AKE 40-185. 1800W 40 cms. Does me very well for my limited use. Do buy a chain sharpener as well because a sharp chain makes an enormous difference to the ease of cutting. Previously I had a B&D where you had to take a side panel off and undo a nut with a spanner and use a screwdriver to tension the chain. Pain in the bum. This one has a big wheel on the side, with one part being the locking mechanism and the other being the adjuster. Much easier. Cheers Dave R I've always used a standard chainsaw file to sharpen chainsaws, but it's not a job I enjoy doing so would be interested to hear of any gizzmos that would make it faster ... ? |
#11
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth theextra cost?
On Thu, 21 Jul 2016 09:50:59 +0100, nospam wrote:
On 19/07/2016 15:40, David wrote: On Mon, 18 Jul 2016 14:32:19 +0100, nospam wrote: I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? I have the Bosch AKE 40-185. 1800W 40 cms. Does me very well for my limited use. Do buy a chain sharpener as well because a sharp chain makes an enormous difference to the ease of cutting. Previously I had a B&D where you had to take a side panel off and undo a nut with a spanner and use a screwdriver to tension the chain. Pain in the bum. This one has a big wheel on the side, with one part being the locking mechanism and the other being the adjuster. Much easier. Cheers Dave R I've always used a standard chainsaw file to sharpen chainsaws, but it's not a job I enjoy doing so would be interested to hear of any gizzmos that would make it faster ... ? Lidl do a sort of customised angle grinder on a stand for sharpening chains. However, only about twice a year and it was on sale in the last couple of months. No idea how good it is. Cheers Dave R -- Windows 8.1 on PCSpecialist box |
#12
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth the extra cost?
In message , David
writes I've always used a standard chainsaw file to sharpen chainsaws, but it's not a job I enjoy doing so would be interested to hear of any gizzmos that would make it faster ... ? Lidl do a sort of customised angle grinder on a stand for sharpening chains. However, only about twice a year and it was on sale in the last couple of months. No idea how good it is. I have a file holder which clamps to the blade guide and allows you to set the various angles specified for sharpening your particular chain. Probably found at your nearest lawnmower/garden tackle outlet. eg. http://www.coopersofstortford.co.uk/...ortford-quick- chainsaw-sharpener-and-guide-prodst09586i/?LGWCODE=9586;103993;5253&gclid =CMKbhZqphM4CFULGGwod6ScBcQ Cheers Dave R -- Tim Lamb |
#13
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth theextra cost?
On 21/07/2016 11:15, Tim Lamb wrote:
In message , David writes I've always used a standard chainsaw file to sharpen chainsaws, but it's not a job I enjoy doing so would be interested to hear of any gizzmos that would make it faster ... ? Lidl do a sort of customised angle grinder on a stand for sharpening chains. However, only about twice a year and it was on sale in the last couple of months. No idea how good it is. I have a file holder which clamps to the blade guide and allows you to set the various angles specified for sharpening your particular chain. Probably found at your nearest lawnmower/garden tackle outlet. eg. http://www.coopersofstortford.co.uk/...ortford-quick- chainsaw-sharpener-and-guide-prodst09586i/?LGWCODE=9586;103993;5253&gclid =CMKbhZqphM4CFULGGwod6ScBcQ Cheers Dave R That's what I have, but I tend to use the guide separately from the file, just to get the angle about right. |
#14
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth theextra cost?
On Thu, 21 Jul 2016 11:15:17 +0100, Tim Lamb wrote:
http://www.coopersofstortford.co.uk/...ortford-quick- chainsaw-sharpener-and-guide-prodst09586i/?LGWCODE=9586;103993;5253&gclid =CMKbhZqphM4CFULGGwod6ScBcQ Nice looking bit of kit. At the moment I just use a free hand file with a guide clamped to it. The page also has a link to a sharpener a bit like the Lidl one. Must not give in to temptation! Cheers Dave R -- Windows 8.1 on PCSpecialist box |
#15
Posted to uk.d-i-y
|
|||
|
|||
Bosch AKE 40 chainsaw question - is the -19 version worth theextra cost?
Wrote in message:
On 18/07/2016 17:25, jim wrote: Wrote in message: I was about to buy a Bosch AKE 40-19S chainsaw from SFix when I saw that Homebase have a cheaper Bosch AKE 40S. The obvious differences are a slightly higher motor power and chain speed on the -19 but I'm tempted to go for the cheaper one if that's all. Has anyone here any experience of either? The higher priced one has toolless assembly & tensioning, the cheaper is more traditional nuts & spanners. I've had both and I wouldn't pay 50 quid odd more for it :-) I'd be surprised if the extra 200w would make a lot of difference in normal usage for an electric chainsaw. It looks like the design has changed because they both now have tool-less assembly and tensioning. I went for the cheaper one - time will tell. Ah yes, looking now at the Homebase website it does indeed look like a toolless one :-) (I goggled for it before and just looked at the pics goggle found) -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bosch AK42 Chainsaw leaking oil when stored. | UK diy | |||
Recommendations wanted for electric chainsaw as my Bosch one has died | UK diy | |||
Chainsaw Usage Question From First Time Chainsaw User ? | Home Repair | |||
Chainsaw Usage Question From First Time Chainsaw User ? | Home Repair | |||
Chainsaw Usage Question From First Time Chainsaw User ? | Home Repair |