Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
does anyone have any recommendations for where to buy a cheap but ok
bathroom suite? is it worth going for the mono mixer ones or seperate hot / cold taps? also want some white tiles to go around the bath (approx 1/3 of the room will be tiled the rest skimmed and painted) finally is it easy to fit a towel radiator? there is currently a standard radiator there although i suspect it is wider than a tower rad would be. |
#2
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
"benpost" wrote in message
... does anyone have any recommendations for where to buy a cheap but ok bathroom suite? is it worth going for the mono mixer ones or seperate hot / cold taps? Try local plumbers merchant, I just bought a bath for £55, sinks and bogs for approx £30 each. |
#3
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
iv'e got a screwfix and plumb centre 5 mins drive away , last time i
went to plumb centre i walked out coz the muppet in front took so long and there was no other staff to serve me, so screwfix got my business that day!! there is also a selco, bdc, then the usual diy shops nearby such as wickes focus b + q homebase. |
#4
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
benpost wrote:
does anyone have any recommendations for where to buy a cheap but ok bathroom suite? is it worth going for the mono mixer ones or seperate hot / cold taps? As already said, the bigger B+Q's do a spearates range where a bath can be had for £60ish, a toilet for £60, and sink for £35. Add the cost of taps to this, and it isnt such a good deal. I would not recommend them though, as they look dated, and if glass-fibre, will be thin. The sink and toilet are OK, though basic. Great for fitting out student houses etc. If you have a Jewsons local to you, try and get them to order you an Armitage Shanks Sandringham bath suite. they were doing this at £223 inc vat, inc. taps last week, though you'll need to check your local branch. The bath in this suite is very good quality, and worth the price on its own IMO. Pics of it he http://www.homesupply.co.uk/armitage...lassic_suite=8 59-prod.html Taps are a personal taste. Lower end baths and sinks tend to have 2 holes for taps, so you havent got a choice there. choose your bath/sink first, then see what taps you want. also want some white tiles to go around the bath (approx 1/3 of the room will be tiled the rest skimmed and painted) Any tile place. I havent found a tile supplier who is a lot cheaper than any other supplier, so go to your nearest one. B+Q do a cement for £10.98 for 7.5kg(iirc) which is about as cheap as you can get cement for. finally is it easy to fit a towel radiator? there is currently a standard radiator there although i suspect it is wider than a tower rad would be. Floorboards or concrete floor? Floorboards are easier, concrete will need to be chiselled out. Drain off the water, fit your new rad to the wall, then attach new piping to existing pipes to fit. Test for leaks, refit floor. Alan. -- To reply by e-mail, change the ' + ' to 'plus'. |
#5
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
Thanks Alan. I'll check out b and q, dont know if there is a jewson
near here but i'll have a look. Regarding the radiator, its a concrete floor, however the pipes are run just above the skirting boards and not in the floor. Is it straightforward to extend these pipes to the correct distance for a towel rad? I guess it might need a plumber to solder it if its on display. |
#6
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
In article ,
benpost writes: does anyone have any recommendations for where to buy a cheap but ok bathroom suite? I got a cheap bog from B&Q 5+ years ago when I was doing a bathroom. It turned out to be a Royal Dalton and for a close coupled 6 litre flush, I have to say it works extremely well. The seat was complete rubbish, and since it was a separate item it want back and I got a nice solid beach seat from homebase. For the bath and basin, I didn't want cheap, so those came from somewhere else. is it worth going for the mono mixer ones or seperate hot / cold taps? My preferred scheme is separate hot/cold on the bath so you can easily see what the fill ratio is when filling the bath. (If you have a shower over the bath, I make that completely separate from the bath taps.) On the basin where you are more likely to use the running water directly for hand washing, I prefer a mixer. also want some white tiles to go around the bath (approx 1/3 of the room will be tiled the rest skimmed and painted) I used Tops Tiles cheapest, and they've been fine for 5+ years now. Note that their adhesive and grout can be expensive though. finally is it easy to fit a towel radiator? there is currently a standard radiator there although i suspect it is wider than a tower rad would be. Consider a towel rack fitted high on the wall over the radiator. I think that works better, and would definately be easier if you're not in to DIY plumbing. Also means you still have a working radiator heating the room (towel rails don't heat rooms). -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
#7
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
In article ,
benpost writes: does anyone have any recommendations for where to buy a cheap but ok bathroom suite? I'm just about to buy from www.bathaholic.com They have a VERY limited range of porcelain BUT it is good quality and cheap and stylish and when I asked them a question, I was answered clearly and helpfully and quickly Anna -- Anna Kettle Lime plaster repair and conservation Freehand modelling in lime: overmantels, pargeting etc Tel: ***(+44) *01359 230642 Mob: *(+44) *07976 649862 Please look at my website for examples of my work at: www.kettlenet.co.uk * |
#8
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
Thanks Andrew and Anna. I am tempted by a towel rad as its neat. didnt
know it wouldnt heat the room, but once you said that i thought well in my situation that doesnt matter. The bathroom always gets too hot as its all internal with no windows! Just having a hot bath turns the room into a sauna! Hopefully my new fan will help with that. I forgot to ask , now I have a more powerful centrifugal fan (vent axia £90), and will soon have all internal doors replaced, do I need a different door at all for the bathroom? Such as leaving a gap at the bottom or having a vent? I remember somebody saying that a decent fan wont work if there is no air inlet to the room, it would cause a vacuum. Now i'm not sure if draught gaps around the door is enough for this or if a gap/vent is required. if you have any info please post |
#9
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
any ideas about the bathroom door?
went down to plumb center they seem pretty good. they do twyford stuff branded differently. seems like i'll buy from either them or wickes, going to price it up later. my experience of wickes is pretty good, the staff are helpful and know their stuff, they only sell decent quality stuff, and everything is well laid out and easy to find. unlike b and q! |
#10
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
On 19 Aug, 17:00, benpost wrote:
any ideas about the bathroom door? what do you have at the minute? how big are the gaps and does your new fan "struggle" (assuming it's fitted) You could try listening for obvious change in pitch (probly down) when you open the bathroom door after a few minutes of it running -NB I'd expect you'd need to be *in* the bathroom to hear the pitch change... If it doesn't seem to struggle and vents out shower steam & "noxious vapours" quick enough for you, then fit the new door with similar gaps etc. If it does struggle make 'em a bit bigger/ put a louvred vent in the door (lower the better I suppose to promote an updraught from vent to fan?) how's that sound? ope it elps Jim |
#11
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
On 17 Aug, 22:43, (Anna Kettle) wrote:
In article , benpost writes: does anyone have any recommendations for where to buy a cheap but ok bathroom suite? I'm just about to buy fromwww.bathaholic.com They have a VERY limited range of porcelain BUT it is good quality and cheap and stylish and when I asked them a question, I was answered clearly and helpfully and quickly Anna Anna, how did you get on with them? thanks Jim |
#12
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
"jim" wrote in message ... On 17 Aug, 22:43, (Anna Kettle) wrote: In article , benpost writes: does anyone have any recommendations for where to buy a cheap but ok bathroom suite? I'm just about to buy fromwww.bathaholic.com They have a VERY limited range of porcelain BUT it is good quality and cheap and stylish and when I asked them a question, I was answered clearly and helpfully and quickly Anna Anna, how did you get on with them? thanks Jim And, Anna, will you mail me please? Mary |
#13
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
On Sat, 20 Sep 2008 17:10:08 +0100, "Mary Fisher"
wrote: "jim" wrote in message ... On 17 Aug, 22:43, (Anna Kettle) wrote: In article , benpost writes: does anyone have any recommendations for where to buy a cheap but ok bathroom suite? I'm just about to buy fromwww.bathaholic.com They have a VERY limited range of porcelain BUT it is good quality and cheap and stylish and when I asked them a question, I was answered clearly and helpfully and quickly Anna Anna, how did you get on with them? thanks Jim And, Anna, will you mail me please? Mary yhm -- Anna Kettle Lime plaster repair and conservation Freehand modelling in lime: overmantels, pargeting etc Tel: ***(+44) *01359 230642 Mob: *(+44) *07976 649862 Please look at my website for examples of my work at: www.kettlenet.co.uk * |
#14
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
On Sat, 20 Sep 2008 08:16:58 -0700 (PDT), jim
wrote: On 17 Aug, 22:43, (Anna Kettle) wrote: In article , benpost writes: does anyone have any recommendations for where to buy a cheap but ok bathroom suite? I'm just about to buy fromwww.bathaholic.com They have a VERY limited range of porcelain BUT it is good quality and cheap and stylish and when I asked them a question, I was answered clearly and helpfully and quickly Anna Anna, how did you get on with them? thanks Jim I dont yet have a definitive answer to that. All went very well then a bout of poor communication but I think they are redeeming themselves. I will let you know ... by the end of next week I expect Anna -- Anna Kettle Lime plaster repair and conservation Freehand modelling in lime: overmantels, pargeting etc Tel: ***(+44) *01359 230642 Mob: *(+44) *07976 649862 Please look at my website for examples of my work at: www.kettlenet.co.uk * |
#15
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
On 21 Sep, 06:51, (Anna Kettle) wrote:
On Sat, 20 Sep 2008 08:16:58 -0700 (PDT), jim wrote: On 17 Aug, 22:43, (Anna Kettle) wrote: In article , benpost writes: does anyone have any recommendations for where to buy a cheap but ok bathroom suite? I'm just about to buy fromwww.bathaholic.com They have a VERY limited range of porcelain BUT it is good quality and cheap and stylish and when I asked them a question, I was answered clearly and helpfully and quickly Anna Anna, how did you get on with them? thanks Jim I dont yet have a definitive answer to that. All went very well then a bout of poor communication but I think they are redeeming themselves. I will let you know ... by the end of next week I expect Anna -- Anna Kettle Lime plaster repair and conservation Freehand modelling in lime: overmantels, pargeting etc Tel: (+44) 01359 230642 Mob: (+44) 07976 649862 Please look at my website for examples of my work at:www.kettlenet.co.uk look forward to hear - thanks NB my email is valid if you'd rather Jim |
#17
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
On 17 Aug, 16:20, benpost wrote:
does anyone have any recommendations for where to buy a cheap but okbathroomsuite? *is it worth going for the mono mixer ones or seperate hot / cold taps? also want some white tiles to go around the bath (approx 1/3 of the room will be tiled the rest skimmed and painted) finally is it easy to fit a towel radiator? there is currently a standard radiator there although i suspect it is wider than a tower rad would be. Hi, I also am fixing up my bathroom and fitting a Bathroom suite. Not sure if this helps but i got a great deal on a bathroom suite from http://www.truerooms.com/ they offer free UK delivery. The also have a massive range of taps and showers. Hope this helps, John. |
#18
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
i have pretty much decided to buy from wickes. they do an antarctic
suite for £189, which is basic but looks decent quality, can always upgrade taps later. anyone bought one from wickes before? they always strike me as selling decent quality stuff at a good price. |
#19
Posted to uk.d-i-y
|
|||
|
|||
where to buy white bathroom suite and tiles?
On Sun, 17 Aug 2008 08:20:15 -0700 (PDT), benpost wrote:
does anyone have any recommendations for where to buy a cheap but ok bathroom suite? is it worth going for the mono mixer ones or seperate hot / cold taps? -------------------8 I wouldn't want a central single mixer on a wash basin. There's a risk of head-butting the tap. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cleaning a white leather suite | UK diy | |||
En-suite bathroom | UK diy | |||
Fitting a bathroom suite | UK diy | |||
B & Q bathroom suite | UK diy | |||
fitting bathroom suite | UK diy |