Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Cooker connection ...
I'm about to get a new free-standing range cooker delivered, that's going in
place of the existing hob / oven combination. I would like to have it removable from its space. Are flexible rubber gas supply pipes with a detachable bayonet fitting still ok for this sort of thing ? If so, I will insist that the gas-fitter puts one on, as I seem to recall that in the past, they were frowned on a bit by the 'pros', although I did have that arrangement on a cooker at a previous house, and it never caused any problems over a number of years' service. Arfa |
#2
Posted to uk.d-i-y
|
|||
|
|||
Cooker connection ...
Arfa Daily wrote:
I'm about to get a new free-standing range cooker delivered, that's going in place of the existing hob / oven combination. I would like to have it removable from its space. Are flexible rubber gas supply pipes with a detachable bayonet fitting still ok for this sort of thing ? If so, I will insist that the gas-fitter puts one on, as I seem to recall that in the past, they were frowned on a bit by the 'pros', although I did have that arrangement on a cooker at a previous house, and it never caused any problems over a number of years' service. as far as I am aware flexi hoses are still commonly used for free-standing cooker. Its built in hobs that need rigid piping. Make sure your fitter fits the anti tilt device on the cooker as well. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#3
Posted to uk.d-i-y
|
|||
|
|||
Cooker connection ...
On Mon, 09 Jun 2008 10:37:20 +0100, John Rumm wrote:
as far as I am aware flexi hoses are still commonly used for free-standing cooker. Its built in hobs that need rigid piping. Make sure your fitter fits the anti tilt device on the cooker as well. Or a chain: an anti-tilt bracket on a range is particularly ridiculous since you'd have to be built like a sumo wrestler to tilt it over whereas there's still a danger of straining the hose by moving the cooker to get access behind it. -- John Stumbles I used to think the brain was the most interesting part of the body - until I realised what was telling me that |
#4
Posted to uk.d-i-y
|
|||
|
|||
Cooker connection ...
"John Stumbles" wrote in message ... On Mon, 09 Jun 2008 10:37:20 +0100, John Rumm wrote: as far as I am aware flexi hoses are still commonly used for free-standing cooker. Its built in hobs that need rigid piping. Make sure your fitter fits the anti tilt device on the cooker as well. Or a chain: an anti-tilt bracket on a range is particularly ridiculous since you'd have to be built like a sumo wrestler to tilt it over whereas there's still a danger of straining the hose by moving the cooker to get access behind it. -- John Stumbles Good point. Now I come to think back, the flexi-hose installation that I had some years back, had a chain on a hook in the wall. Arfa |
#5
Posted to uk.d-i-y
|
|||
|
|||
Cooker connection ...
"Arfa Daily" wrote in message
... "John Stumbles" wrote in message ... On Mon, 09 Jun 2008 10:37:20 +0100, John Rumm wrote: as far as I am aware flexi hoses are still commonly used for free-standing cooker. Its built in hobs that need rigid piping. Make sure your fitter fits the anti tilt device on the cooker as well. Or a chain: an anti-tilt bracket on a range is particularly ridiculous since you'd have to be built like a sumo wrestler to tilt it over whereas there's still a danger of straining the hose by moving the cooker to get access behind it. -- John Stumbles Good point. Now I come to think back, the flexi-hose installation that I had some years back, had a chain on a hook in the wall. Well there are two functions. The cooker requires [may need] an anti tilt so that leaning on the oven door doesn't tip pans of boiling stuff over the front edge. The chain ensures that, when the cooker is pulled out to clean behind (or whatever) no strain is taken by the hose as the chain tightens first. I think a gas installer would only worry about the second as it's part of the gas safety. -- Bob Mannix (anti-spam is as easy as 1-2-3 - not |
#6
Posted to uk.d-i-y
|
|||
|
|||
Cooker connection ...
On Tue, 10 Jun 2008 08:44:34 +0100, Bob Mannix wrote:
Well there are two functions. The cooker requires [may need] an anti tilt so that leaning on the oven door doesn't tip pans of boiling stuff over the front edge. And with lightweight modern cookers with big heavy glass oven doors you don't need to put much weight on the door to tip it either. Just resting the weight of your arm on it can do it. BTDTGTTS, fortunately whilst installing. I think a gas installer would only worry about the second as it's part of the gas safety. Second being the safety chain first anti tilt device. Any "competent" installer would fit and test both. See other thread "CORGI engineer required to install new radiator?" -- Cheers Dave. |
#7
Posted to uk.d-i-y
|
|||
|
|||
Cooker connection ...
On Tue, 10 Jun 2008 08:44:34 +0100, Bob Mannix wrote:
Well there are two functions. The cooker requires [may need] an anti tilt so that leaning on the oven door doesn't tip pans of boiling stuff over the front edge. The chain ensures that, when the cooker is pulled out to clean behind (or whatever) no strain is taken by the hose as the chain tightens first. I think a gas installer would only worry about the second as it's part of the gas safety. The chain or anti-tilt device is to protect the hose, not the user from spilling pans of chip fat. (Otherwise we'd have the same regs for electric cookers.) -- John Stumbles Women always generalise |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Gas cooker connection | UK diy | |||
Bayonet gas cooker connection | UK diy | |||
Electric cooker connection | UK diy | |||
Electrics - Replace full electric cooker with a duel fuel cooker | UK diy | |||
Cooker Socket over Cooker? | UK diy |