Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
Anyone know where I could get an L-shaped (preferably steel) bracket?
It's to support one end of a trellis. The trellis sits on top a wall. The bracket needs to be about 150mm x 800mm, and about 30mm wide. I would be fixing the 150mm bit into the top of the wall with something fairly hefty to take the leverage when the wind blows. I can't use a long straight bar running down the wall because the wall has an oversailing course at the top. The other end of the trellis is nicely fixed to a sturdy fence post. Cheers! Martin |
#2
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
In message . com,
Martin Pentreath wrote Anyone know where I could get an L-shaped (preferably steel) bracket? It's to support one end of a trellis. The trellis sits on top a wall. The bracket needs to be about 150mm x 800mm, and about 30mm wide. I would be fixing the 150mm bit into the top of the wall with something fairly hefty to take the leverage when the wind blows. I can't use a long straight bar running down the wall because the wall has an oversailing course at the top. The other end of the trellis is nicely fixed to a sturdy fence post. Try Screwfix for some ideas http://www.screwfix.com Search for builders metalwork http://www.screwfix.com/app/sfd/cat/cat.jsp?cId=101228&ts=55373 -- Alan news2006 {at} amac {dot} f2s {dot} com |
#3
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
"Martin Pentreath" wrote in message ups.com... Anyone know where I could get an L-shaped (preferably steel) bracket? It's to support one end of a trellis. The trellis sits on top a wall. The bracket needs to be about 150mm x 800mm, and about 30mm wide. I would be fixing the 150mm bit into the top of the wall with something fairly hefty to take the leverage when the wind blows. I can't use a long straight bar running down the wall because the wall has an oversailing course at the top. The other end of the trellis is nicely fixed to a sturdy fence post. Cheers! Martin Why steel? Without entirely understanding your geometry, might it not be simpler to fabricate something in wood? Use multi monti bolts or coachbolts into big rawlplugs, or rawlbolts to fix the timber to the wall. What loads is it taking? You can get galvanised strap about 25 x 4 mm from builders' merchants which is typically used to locate wallplates for roofing timbers on the top of a wall. |
#4
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
Martin Pentreath wrote:
Anyone know where I could get an L-shaped (preferably steel) bracket? It's to support one end of a trellis. The trellis sits on top a wall. The bracket needs to be about 150mm x 800mm, and about 30mm wide. I would be fixing the 150mm bit into the top of the wall with something fairly hefty to take the leverage when the wind blows. I can't use a long straight bar running down the wall because the wall has an oversailing course at the top. The other end of the trellis is nicely fixed Have a look in Wickes, they have a good selection of HD metal brackets. -- Dave The Medway Handyman www.medwayhandyman.co.uk 01634 717930 07850 597257 |
#5
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
Thanks for the replies. Will have a look in Wickes, if not there then
some of the Screwfix brackets might work. The load it needs to take is, I would guess, potentially quite high. It's to support one end of a 6' x 4' bit of trellis sitting on top of a brick wall. Once it's covered in jasmine and a bit of a wind gets up I would guess the forces involves are pretty big |
#6
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
On 25 Mar, 22:43, "Martin Pentreath"
wrote: Thanks for the replies. Will have a look in Wickes, if not there then some of the Screwfix brackets might work. The load it needs to take is, I would guess, potentially quite high. It's to support one end of a 6' x 4' bit of trellis sitting on top of a brick wall. Once it's covered in jasmine and a bit of a wind gets up I would guess the forces involves are pretty big PS Here's an ASCII picture of what's going on (fixed font required): | | | | | === Trellis L bar to | go here ==== | _____ | | | | ===== oversailing course preventing | | straight steel (or wooden) | | bar going down the wall | | | | | | | | |
#7
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
"Martin Pentreath" wrote in message ups.com... Anyone know where I could get an L-shaped (preferably steel) bracket? It's to support one end of a trellis. The trellis sits on top a wall. The bracket needs to be about 150mm x 800mm, and about 30mm wide. I would be fixing the 150mm bit into the top of the wall with something fairly hefty to take the leverage when the wind blows. I can't use a long straight bar running down the wall because the wall has an oversailing course at the top. The other end of the trellis is nicely fixed to a sturdy fence post. Cheers! Martin Try this http://www.expamet.co.uk/bp/products/batmaxi.html Tony |
#8
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
Martin Pentreath wrote:
On 25 Mar, 22:43, "Martin Pentreath" wrote: Thanks for the replies. Will have a look in Wickes, if not there then some of the Screwfix brackets might work. The load it needs to take is, I would guess, potentially quite high. It's to support one end of a 6' x 4' bit of trellis sitting on top of a brick wall. Once it's covered in jasmine and a bit of a wind gets up I would guess the forces involves are pretty big PS Here's an ASCII picture of what's going on (fixed font required): | | | | | === Trellis L bar to | go here ==== | _____ | | | | ===== oversailing course preventing | | straight steel (or wooden) | | bar going down the wall | | | | | | | | Could you not fabricate a wooden post in sections to go around the oversailing course? Or cut a rebate in a solid post? Much stronger than a bracket. | | | - screw & glue together | | | - bolt thru into wall |__| | | | | | __| | | | | | | | - bolt thru into wall | | | - screw & glue together Or one of these http://www.wickes.co.uk/invt/246012 not sure how long the bottom of the 'L' is though. -- Dave The Medway Handyman www.medwayhandyman.co.uk 01634 717930 07850 597257 |
#9
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
Martin Pentreath wrote:
On 25 Mar, 22:43, "Martin Pentreath" wrote: Thanks for the replies. Will have a look in Wickes, if not there then some of the Screwfix brackets might work. The load it needs to take is, I would guess, potentially quite high. It's to support one end of a 6' x 4' bit of trellis sitting on top of a brick wall. Once it's covered in jasmine and a bit of a wind gets up I would guess the forces involves are pretty big PS Here's an ASCII picture of what's going on (fixed font required): | | | | | === Trellis L bar to | go here ==== | _____ | | | | ===== oversailing course preventing | | straight steel (or wooden) | | bar going down the wall | | | | | | | | Having seen that, go and find your local metal bashing/welding company and ask them to make a joggled bracket with a section welded to it to make it a tee section vertical that gives lateral strength that can be bolted to the side of the wall. The joggle will follow the path of the wall, till the 'oversailing' (the joggled part) and then continue to follow the wall up to it's top. Get them to plate it to prevent rust and it should last your life out. | | | | | | | | | | === Trellis on left, brkt on right L bar to | | go here ==== | | _____ | | | | | | ===== joggle high point | | | | | | | | | | | | | | | | | | Cross section of the tee section looking from above, I hope this works | | |----- | | Dave |
#10
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
In message . com,
Martin Pentreath writes Anyone know where I could get an L-shaped (preferably steel) bracket? It's to support one end of a trellis. The trellis sits on top a wall. The bracket needs to be about 150mm x 800mm, and about 30mm wide. I would be fixing the 150mm bit into the top of the wall with something fairly hefty to take the leverage when the wind blows. I can't use a long straight bar running down the wall because the wall has an oversailing course at the top. The other end of the trellis is nicely fixed to a sturdy fence post. Almost anywhere -- geoff |
#11
Posted to uk.d-i-y
|
|||
|
|||
L-shaped bracket?
"Martin Pentreath" wrote in message ups.com... Anyone know where I could get an L-shaped (preferably steel) bracket? It's to support one end of a trellis. The trellis sits on top a wall. The bracket needs to be about 150mm x 800mm, and about 30mm wide. I would be fixing the 150mm bit into the top of the wall with something fairly hefty to take the leverage when the wind blows. I can't use a long straight bar running down the wall because the wall has an oversailing course at the top. The other end of the trellis is nicely fixed to a sturdy fence post. Cheers! Martin Use a steel joist hanger? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SHAPED GUITAR CASE | Woodworking | |||
Saw blades with V shaped cutters | Woodworking | |||
CHEVRON SHAPED DECKING | UK diy | |||
Can you get an 'S' shaped Flush Pipe for toilet? | UK diy | |||
'L' shaped bath anybody? | UK diy |