Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Fitting PVC fascias no soffits
Hi,
I'm consderering replacing the existing wooden facias with PVC. The existing fascia is simply a length of ply nailed to the rafters, such that the fascia is practically flush with the brick work i.e. no soffit. All of the PVC fascia bords I've seen are of L section in design, to give suport for the soffit. I can't really pack out the rafter ends as the property is part of a terrace and it would not then align with my neighbors fascia. I don't want to use capping over a wooden board. How does one get around this, should I just cut the unwanted piece off? Can you get flat 16mm thick boards? Thanks Jim |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing Soffits / Fascias (is FasciaMania okay) | UK diy | |||
"idiot proof" final circuit design | UK diy | |||
soffits and fascias | UK diy | |||
Stupid question of the day.... BSP screw-in plumbing connections | UK diy | |||
Old hot water tank fitting | UK diy |