"Bob Minchin" wrote in message
...

"Cicero" wrote in message
. uk...

"Bob Minchin" wrote in message
...

"Jim Ingram" wrote in
message
...
Hi,

I'm consderering replacing the existing wooden facias with PVC. The
existing
fascia is simply a length of ply nailed to the rafters, such that
the
fascia is practically flush with the brick work i.e. no soffit. All
of
the
PVC fascia bords I've seen are of L section in design, to give
suport
for
the soffit. I can't really pack out the rafter ends as the property
is
part
of a terrace and it would not then align with my neighbors fascia. I
don't
want to use capping over a wooden board. How does one get around
this,
should I just cut the unwanted piece off? Can you get flat 16mm
thick
boards?

Thanks

Jim




Hi Jim,

I've just measured some board i have and the thickness is about 17mm
and
the
L lip is a further 17mm.
You can cut this off easily with a table saw or with care, a hand saw.
The edge does give extra rigidity and I wonder if just attaching it to
your
rafter ends migth not be enough support witht eh edge cut off leading
to
a
rather scalloped look. The surface is quite shiny making impertections
in
the surface very noticeable.

snip

Hope this helps

Good luck

Bob


===========================
You could fit it 'inside out' - i.e. with the 17mm projection on the
outside. Cut a 1/4" drip groove in the bottom with a router.

Cic.



--------------------------------------------------------------------------
--
snip


This won't work with the stuff I've got it is a naff off white colour on
the
inside.

Bob


============================
I think that inner surface is still weather-proof and if so it might be
worth putting up with the (possibly) poor appearance. It won't be very
visible 16 feet up at the top of the house.

Cic.


----------------------------------------------------------------------------
----
I am using the free version of SPAMfighter for private users.
It has removed 38 spam emails to date.
Paying users do not have this message in their emails.
Try SPAMfighter for free now!