Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Belt Buckle Handcuff Keys: NEW UPDATE!
Hey Guys,
Many of you will remember my posts. I had a descent response of interest, however, nothing came up that was more then satisfactory for my needs. Thus, I have decided to take it upon myself to do it myself, and build these props myself. Here is my question, some of the props i plan to fabricate, I need to make using a butane/propane tourch, and some kind of solder like metal, that will hold extremely well. My question is, what should I use, a propate or butane tourch? Also, what recomendation do you folks have on the type of solder style metal to use, that will hold through repeated, and perhaps even underwater use? Thanks, Aaron P. Fagan http://www.escapology1.com |
#2
|
|||
|
|||
Your strongest low temp metal would be ZINC --- you can find it in used
carboraters , car door handels and such. "Aaron P. Fagan" wrote: Hey Guys, Many of you will remember my posts. I had a descent response of interest, however, nothing came up that was more then satisfactory for my needs. Thus, I have decided to take it upon myself to do it myself, and build these props myself. Here is my question, some of the props i plan to fabricate, I need to make using a butane/propane tourch, and some kind of solder like metal, that will hold extremely well. My question is, what should I use, a propate or butane tourch? Also, what recomendation do you folks have on the type of solder style metal to use, that will hold through repeated, and perhaps even underwater use? Thanks, Aaron P. Fagan http://www.escapology1.com |
#3
|
|||
|
|||
Depending on your design, I would use a propane torch and silver
brazing. Dan |
#4
|
|||
|
|||
On Mon, 07 Feb 2005 04:27:15 GMT, "Aaron P. Fagan"
wrote: Hey Guys, Many of you will remember my posts. I had a descent response of interest, however, nothing came up that was more then satisfactory for my needs. Thus, I have decided to take it upon myself to do it myself, and build these props myself. Here is my question, some of the props i plan to fabricate, I need to make using a butane/propane tourch, and some kind of solder like metal, that will hold extremely well. My question is, what should I use, a propate or butane tourch? Also, what recomendation do you folks have on the type of solder style metal to use, that will hold through repeated, and perhaps even underwater use? Solder doesn't really join metal; it's an illusion. |
#5
|
|||
|
|||
On Mon, 07 Feb 2005 14:14:55 -0600, Don Foreman wrote:
Solder doesn't really join metal; it's an illusion. Really? Damn, I guess that means none of our electronics work. |
#6
|
|||
|
|||
On 7 Feb 2005 20:16:44 GMT, Dave Hinz wrote:
On Mon, 07 Feb 2005 14:14:55 -0600, Don Foreman wrote: Solder doesn't really join metal; it's an illusion. Really? Damn, I guess that means none of our electronics work. OK, Dave. Maybe I should have said that it works like magic.... |
#7
|
|||
|
|||
On Mon, 07 Feb 2005 16:58:40 -0600, Don Foreman wrote:
On 7 Feb 2005 20:16:44 GMT, Dave Hinz wrote: On Mon, 07 Feb 2005 14:14:55 -0600, Don Foreman wrote: Solder doesn't really join metal; it's an illusion. Really? Damn, I guess that means none of our electronics work. OK, Dave. Maybe I should have said that it works like magic.... Kind of like that magic black smoke inside the chips, then? OK, now I understand. |
#8
|
|||
|
|||
Aaron P. Fagan wrote:
Hey Guys, Many of you will remember my posts. I had a descent response of interest, however, nothing came up that was more then satisfactory for my needs. Thus, I have decided to take it upon myself to do it myself, and build these props myself. Here is my question, some of the props i plan to fabricate, I need to make using a butane/propane tourch, and some kind of solder like metal, that will hold extremely well. My question is, what should I use, a propate or butane tourch? Also, what recomendation do you folks have on the type of solder style metal to use, that will hold through repeated, and perhaps even underwater use? What kind of metal are your parts made from? If brass or steel, a high-temp silver solder would be good. For small parts, a propane torch should work, you need to get the joint red-hot. You can also use 1/16" brass brazing rod. Either way, you need brazing flux (borax) and a close-fitting joint, well cleaned and degreased before joining. If you need more heat, an air/acetylene torch would be good. Presto is the well-known brand, and you need a single hose and regulator. You can get a small MC tank (10 cu. in.) for a few dollars, it cost me $13 to exchange my empty for a full one just the other day. There are all sorts of low-temp solders, but they may not be reliable enough. I'd stay away from electrical and plumbing solders, they are best used as intended. Ken Grunke -- take da "ma" offa dot com fer eemayl ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Belt buckle for Brits only | Woodworking | |||
Tool Belt Bloviation | Woodworking | |||
Aluminum foundries in N. Calif? | Metalworking | |||
Changing the belt on a Jet Supersaw | Woodworking | |||
Replacing drive belt on GE dryer. | Home Repair |