Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
Well, the IR regulator blew out again yesterday. Took me mere minutes
to swap out to the new one I ordered from McMaster Carr. I am so glad I put a shut off valve right on the tank so I don't have to drain it to work on my air lines. McMaster doesn't like to tell you what brand they are going to send you, but the paper work with the regulator says its a Norgren. I've never even seen Norgren before, but that name sounds familiar. So, will I be replacing it again in less than a year or is it likely to be a better quality regulator. It wasn't much more expensive than the IR regulator. Maybe $10 difference. |
#2
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On 7/24/2019 8:12 PM, Bob La Londe wrote:
Well, the IR regulator blew out again yesterday.Â* Took me mere minutes to swap out to the new one I ordered from McMaster Carr.Â* I am so glad I put a shut off valve right on the tank so I don't have to drain it to work on my air lines. McMaster doesn't like to tell you what brand they are going to send you, but the paper work with the regulator says its a Norgren.Â* I've never even seen Norgren before, but that name sounds familiar.Â* So, will I be replacing it again in less than a year or is it likely to be a better quality regulator.Â* It wasn't much more expensive than the IR regulator. Â*Maybe $10 difference. IIRC I saw some Norgren regulators on CO2 tanks in the soda fountain trade in the '50s |
#3
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Wednesday, July 24, 2019 at 9:12:29 PM UTC-4, Bob La Londe wrote:
work on my air lines. McMaster doesn't like to tell you what brand they are going to send you, That is my One Big Complaint about McMaster. It makes it difficult to use them for prototype parts for devices that will go into production. |
#4
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On 25/07/2019 02:12, Bob La Londe wrote:
Well, the IR regulator blew out again yesterday.Â* Took me mere minutes to swap out to the new one I ordered from McMaster Carr.Â* I am so glad I put a shut off valve right on the tank so I don't have to drain it to work on my air lines. McMaster doesn't like to tell you what brand they are going to send you, but the paper work with the regulator says its a Norgren.Â* I've never even seen Norgren before, but that name sounds familiar.Â* So, will I be replacing it again in less than a year or is it likely to be a better quality regulator.Â* It wasn't much more expensive than the IR regulator. Â*Maybe $10 difference. I've got a few Norgren components including regulators and have never had an issue with them. The one on my compressor has been in use for a couple of decades and was 2nd hand when installed. Fairly well known this side of the pond in the UK as far as I know. |
#5
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Thu, 25 Jul 2019 08:30:36 -0500, gray_wolf
wrote: On 7/24/2019 8:12 PM, Bob La Londe wrote: Well, the IR regulator blew out again yesterday.* Took me mere minutes to swap out to the new one I ordered from McMaster Carr.* I am so glad I put a shut off valve right on the tank so I don't have to drain it to work on my air lines. McMaster doesn't like to tell you what brand they are going to send you, but the paper work with the regulator says its a Norgren.* I've never even seen Norgren before, but that name sounds familiar.* So, will I be replacing it again in less than a year or is it likely to be a better quality regulator.* It wasn't much more expensive than the IR regulator. *Maybe $10 difference. IIRC I saw some Norgren regulators on CO2 tanks in the soda fountain trade in the '50s As one of the largest and most trusted manufacturers of motion and fluid control solutions, the Norgren brand has become synonymous with quality and unmatched reliability in pneumatics and the field of fluid power in general. Norgren offers a comprehensive lineup of all components required for any air circuit; however, they are particularly well known for cylinders and actuators, valves, pressure sensing and control, airline preparation and their recognizable push-in Pneufit fittings. |
#6
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Thu, 25 Jul 2019 08:30:36 -0500, gray_wolf
wrote: On 7/24/2019 8:12 PM, Bob La Londe wrote: Well, the IR regulator blew out again yesterday.* Took me mere minutes to swap out to the new one I ordered from McMaster Carr.* I am so glad I put a shut off valve right on the tank so I don't have to drain it to work on my air lines. McMaster doesn't like to tell you what brand they are going to send you, but the paper work with the regulator says its a Norgren.* I've never even seen Norgren before, but that name sounds familiar.* So, will I be replacing it again in less than a year or is it likely to be a better quality regulator.* It wasn't much more expensive than the IR regulator. *Maybe $10 difference. IIRC I saw some Norgren regulators on CO2 tanks in the soda fountain trade in the '50s Within the area of pneumatic motion, Norgren offers tried and tested products such as cylinders, actuators, airline preparation, fittings and valves. Proven brands including Lintra, Excelon, Pneufit, Martonair, Enots and Herion make Norgren’s pneumatic motion portfolio one of the strongest in the industry. Their strengths are in applications within sectors such as commercial vehicle, rail, automotive, automation, food production, packaging and printing. |
#7
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Wed, 24 Jul 2019 18:12:26 -0700, Bob La Londe
wrote: Well, the IR regulator blew out again yesterday. Took me mere minutes to swap out to the new one I ordered from McMaster Carr. I am so glad I put a shut off valve right on the tank so I don't have to drain it to work on my air lines. McMaster doesn't like to tell you what brand they are going to send you, but the paper work with the regulator says its a Norgren. I've never even seen Norgren before, but that name sounds familiar. So, will I be replacing it again in less than a year or is it likely to be a better quality regulator. It wasn't much more expensive than the IR regulator. Maybe $10 difference. Norgren is good stuff. Or it used to be. It was/is US made. Gunner __ "Poor widdle Wudy...mentally ill, lies constantly, doesnt know who he is, or even what gender "he" is. No more pathetic creature has ever walked the earth. But...he is locked into a mental hospital for the safety of the public. Which is a very good thing." Asun rauhassa, valmistaudun sotaan. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Air Pressure Regulators | Metalworking | |||
Water pressure regulators | Home Repair | |||
air compressor regulators | Home Repair | |||
air compressor regulators | Home Repair | |||
Water Pressure Regulators | Home Repair |