Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore ,just political ****.
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore ,just political ****.
On Wed, 23 Nov 2016 15:24:06 +0930, Bluey69
wrote: So when was the last time YOU posted anything visa vis metalworking? Hummm? Dolt. Im in the process of getting (6) chainsaws running. So far 2 are purring like..well..chainsaws...I should have the 3rd up in the morning and there will be 2 more to go. Ever see a Mac 310 with a 12" bar? WTF??? Big enough saw to run a 24-36" blade....wierd... They are part of that batch of stuff I inherited from the guy who flaked out and started to walk away from a FULL 10x25" storage suite. Got my 6 1/2hp Craftsman fired up last week, along with a weed eater and a 4000 watt Onan genset. The Ranger 9 welder/genset is on the list as well. Sometime this week, I have to trim my palm tree at the 40' level, trim back the skunkwood tree overhanging the cargo container, chip it up and then spread it in the cactus gardens. Had a real cloud burst Tuesday night..and found one of my 8' storage cabinets awash. In my den. So I need to go up and tarp the roof. I knew it was getting bad..but didnt know it was THAT bad. Anybody have pocket change to put on a new 1/2 roof? Sigh. Oh..I cleaned up my machine shop, machined a couple 416 SS parts for one of my sailboats and am getting ready to go get my 1989 Aquarius 23. I was going to do it Friday..but they were going out of town for the holidays and will be back on the 27th. So Dolt..what have YOU been doing? Hummmm? --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore ,just political ****.
On Wed, 23 Nov 2016 15:24:06 +0930, Bluey69
wrote: Oh...I forgot to mention, last week and this...in addition to the daylight stuff, in the evenings...I cast and then loaded 400 41 Magnum rounds, 100 45-70 300 gr JHPs, 150 405 cast gaschecked rounds in the same caliber..and 60 of my 500gr hard cast sharp pointed spitzers for ground squirrel shooting. Along with 400 rds of 158gr SWCs in 357 Mag and 40 rds of 158gr soft point flat nose rounds in 357 Maximun for the Savage over and under. Ive got 6.5 Swedes in the tumbers as I type this and will be loading several hundred rounds for each of my Swedes..each with its own recipe. After that, comes 400 44 Mag cast loads and a hundred or so JHPs. Then a few thousand .45 ACPs...got the lead ingotized and now that the weather is cooling off..I can have a big casting session and run a few hundred pounds of wheelweights through the molds. A trade I did over a year ago, finally born fruit, and Im taking delivery of my AR in 6.5 Grendel this coming weekend ..so have been prepping 7.62x39 brass into fireform shape. Not sure what Im going to fireform them with..its a gas piston rifle..cast bullets would be the thing to use...but cleaning the piston system out....brrrrrr... Then I need to decide if Im actually going to register the lil critter..California laws have come un****ed..or wait till the last minute and see if the Donald and the heavily pro 2nd Amendment new SCOTUS rules most of California laws unConstitutional. Thats what I think Ill do.. Afterall..this is not going to be a toting rifle..but a ballot box/jurybox/cartridge box arm. Is this good metalworking laddy boyo? Sorry boyo...Ive not done much machining lately..nor much welding. Oh..I did weld up a base for my Emglo 3hp gasoline driven air compressor early last week. It will be mounted in my old service body trailer which I retrieved Sunday. I still have to go get the old Hobi 16 sailboat thats sitting out there, but the sale of my friends ranch has run into a snag..so I have a month or so before I need to drag it home to the High Desert Boat Werx storage compound...IE..my side yard. That will be #7. Want to buy a Venture 24? Needs a bit of cleaning and some TLC, but is in decent shape with at least 5 sails and a MARVELOUS trailer. $1000, no outboard. The 9.9 Johnson Sailmaster will be going on the new to me Aquarius 23 when it gets home to her new owner...me. So mate..what have you been doing eh? Other than way too many pints from those pesky metal cans.... Oh..Ive been told Im under consideration for a job with a firm that specializes in CNC metal forming tools, benders, mills, lathes, CNC punches and so forth. Similar name to the new President. However..it will be Traveling Service Tech...60 hrs a week+ and flying all across the US and Canada and Mexico. At my age..Im not terribly sure its something I really want to do. Road warrior at my age...will be a gut buster..Ive done it for 30 yrs ...and just when I thought Id found something local..this turns up. Gotta ponder a lot on this ya know. Im not going to hang up my rolling tool box for another 7 or so years, when I turn 70...but damnit...Id love to be able to get in the car, drive no more than 30 minutes and be at work. This Bakersfield to Pittsburg crap...gotta ponder on it a lot...big time. So mate..whacha been doing visa vis metalworking lately? Hummmm? --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore...
I recently bought this chuck, a product of Inner Mongolia,
http://littlemachineshop.com/product...ProductID=2276 and the snug-fitting 5C mount LMS doesn't list as a backplate for it. http://littlemachineshop.com/product...ProductID=5479 5C isn't just convenient, it allows the chuck and work to move between the lathe and an indexing fixture on the mill. There's another tool-grinding version of the chuck, lacking the outer steps, that some people report receiving instead. I now understand the advice that 6-jaws aren't the best general-purpose chucks and am glad I didn't spend several times more for the larger choices. It does grip difficult parts like hex bolt heads and tubing better than a 3-jaw but it isn't a good substitute for collets for accurate work. The internal gripping range is 0.2" to about 1.6". The external range is about 1.3" to 3.9" on the steps, 5" on the unground jaw ends if you don't need the steps to square up the work. It won't be my choice for heavy cuts, especially with the jaws opened wide and little scroll engagement. --jsw |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore...
Jim Wilkins wrote:
I recently bought this chuck, a product of Inner Mongolia, http://littlemachineshop.com/product...ProductID=2276 What's the quality like? LMS seems hit or miss, but they always make it right in the end, so they're good to deal with. |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore...
"Cydrome Leader" wrote in message
news Jim Wilkins wrote: I recently bought this chuck, a product of Inner Mongolia, http://littlemachineshop.com/product...ProductID=2276 What's the quality like? LMS seems hit or miss, but they always make it right in the end, so they're good to deal with. LMS is a good source for stuff you just can't find elsewhere for small machines. Like an offset parting tool holder so you can get it down low enough to use on a mini lathe. Anybody with a real lathe would never even think of such a thing. |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore...
"Cydrome Leader" wrote in message
news Jim Wilkins wrote: I recently bought this chuck, a product of Inner Mongolia, http://littlemachineshop.com/product...ProductID=2276 What's the quality like? LMS seems hit or miss, but they always make it right in the end, so they're good to deal with. The fit and finish are good, about the same as my Bison chucks. I don't have anything better to compare it to. They claim 0.003" runout and that's what I measured. I probably won't use it long or hard enough to see wear. I bought it after salvaging a thin-walled sleeve on my truck that was part of an assembly which would cost over $300 to replace. The lathe setup was very wonky without a 6-jaw and I was lucky to have some tapered scrap that jammed in and supported the tailstock end well enough for very light cuts. -jsw |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore ,just political ****.
On Wed, 23 Nov 2016 02:34:58 -0800, Gunner Asch
wrote: On Wed, 23 Nov 2016 15:24:06 +0930, Bluey69 wrote: So when was the last time YOU posted anything visa vis metalworking? Hummm? Dolt. Im in the process of getting (6) chainsaws running. So far 2 are purring like..well..chainsaws...I should have the 3rd up in the morning and there will be 2 more to go. Ever see a Mac 310 with a 12" bar? WTF??? Big enough saw to run a 24-36" blade....wierd... They are part of that batch of stuff I inherited from the guy who flaked out and started to walk away from a FULL 10x25" storage suite. Got my 6 1/2hp Craftsman fired up last week, along with a weed eater and a 4000 watt Onan genset. The Ranger 9 welder/genset is on the list as well. Sometime this week, I have to trim my palm tree at the 40' level, trim back the skunkwood tree overhanging the cargo container, chip it up and then spread it in the cactus gardens. Had a real cloud burst Tuesday night..and found one of my 8' storage cabinets awash. In my den. So I need to go up and tarp the roof. I knew it was getting bad..but didnt know it was THAT bad. Anybody have pocket change to put on a new 1/2 roof? Sigh. Oh..I cleaned up my machine shop, machined a couple 416 SS parts for one of my sailboats and am getting ready to go get my 1989 Aquarius 23. I was going to do it Friday..but they were going out of town for the holidays and will be back on the 27th. So Dolt..what have YOU been doing? Hummmm? Oh Gee, hauling another 30 year old piece of aquatic scrap back to the resident junk yard is "metal working"? Well, I suppose it is.... after all the truck is made of metal. And what was it you mentioned about the guy that abandoned a "FULL 10x25" storage suite" thus giving you the opportunity of stealing everything in it? Yup. A metal workers metalworker. NOT! The term I think you are searching for is "Scrap Yard Worker". |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore...
On 2016-11-23, Jim Wilkins wrote:
I recently bought this chuck, a product of Inner Mongolia, http://littlemachineshop.com/product...ProductID=2276 and the snug-fitting 5C mount LMS doesn't list as a backplate for it. http://littlemachineshop.com/product...ProductID=5479 A nice combination. I've got a relatively larger (6") 6-jaw with adjust-tru style mounting, but this would be nice for lots of things. 5C isn't just convenient, it allows the chuck and work to move between the lathe and an indexing fixture on the mill. Agreed. Enjoy, DoN. -- Remove oil spill source from e-mail Email: | (KV4PH) Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore...
"DoN. Nichols" wrote in message
... On 2016-11-23, Jim Wilkins wrote: I recently bought this chuck, a product of Inner Mongolia, http://littlemachineshop.com/product...ProductID=2276 and the snug-fitting 5C mount LMS doesn't list as a backplate for it. http://littlemachineshop.com/product...ProductID=5479 A nice combination. I've got a relatively larger (6") 6-jaw with adjust-tru style mounting, but this would be nice for lots of things. 5C isn't just convenient, it allows the chuck and work to move between the lathe and an indexing fixture on the mill. Agreed. Enjoy, DoN. I drooled over a larger adjustable 6-jaw for years but never could justify the expense since a step collet or custom mandrel holds thin tubes even better when the job is worth the effort. I already have a 5" 3-jaw Set-Tru and a 6" 4-jaw. The carriage can pass under the 5" chuck to work on the back side. I see this one as holding fragile stock like a finned model engine cylinder while I rough it nearly to shape. Once it's no longer subject to heat expansion I could make the custom finishing fixture with a very narrow gripping range. --jsw |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore ,just political ****.
On Thu, 24 Nov 2016 07:46:04 +0700, "nThe Mighty Ant"
wrote: On Wed, 23 Nov 2016 02:34:58 -0800, Gunner Asch wrote: On Wed, 23 Nov 2016 15:24:06 +0930, Bluey69 wrote: So when was the last time YOU posted anything visa vis metalworking? Hummm? Dolt. Im in the process of getting (6) chainsaws running. So far 2 are purring like..well..chainsaws...I should have the 3rd up in the morning and there will be 2 more to go. Ever see a Mac 310 with a 12" bar? WTF??? Big enough saw to run a 24-36" blade....wierd... They are part of that batch of stuff I inherited from the guy who flaked out and started to walk away from a FULL 10x25" storage suite. Got my 6 1/2hp Craftsman fired up last week, along with a weed eater and a 4000 watt Onan genset. The Ranger 9 welder/genset is on the list as well. Sometime this week, I have to trim my palm tree at the 40' level, trim back the skunkwood tree overhanging the cargo container, chip it up and then spread it in the cactus gardens. Had a real cloud burst Tuesday night..and found one of my 8' storage cabinets awash. In my den. So I need to go up and tarp the roof. I knew it was getting bad..but didnt know it was THAT bad. Anybody have pocket change to put on a new 1/2 roof? Sigh. Oh..I cleaned up my machine shop, machined a couple 416 SS parts for one of my sailboats and am getting ready to go get my 1989 Aquarius 23. I was going to do it Friday..but they were going out of town for the holidays and will be back on the 27th. So Dolt..what have YOU been doing? Hummmm? Oh Gee, hauling another 30 year old piece of aquatic scrap back to the resident junk yard is "metal working"? Well, I suppose it is.... after all the truck is made of metal. And what was it you mentioned about the guy that abandoned a "FULL 10x25" storage suite" thus giving you the opportunity of stealing everything in it? Yup. A metal workers metalworker. NOT! The term I think you are searching for is "Scrap Yard Worker". Funniest element is that he has the time to phony-brag about how busy he is with all his adventures... while mentioning that one of them is tarping his roof instead of making what are obviously long-overdue repairs. He could reshingle the whole trailer for under a grand, which is 4 months of his cell phone bill to hear him tell it. Or he could have given up tobacco and soda a few months back and used that money for roofing. Oh well - interior water park: just another perk of being a moron who's allergic to employment. |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Not much on metalworking here anymore ,just political ****.
On Fri, 25 Nov 2016 08:35:07 -0800, Burger Man wrote:
On Thu, 24 Nov 2016 07:46:04 +0700, "nThe Mighty Ant" wrote: On Wed, 23 Nov 2016 02:34:58 -0800, Gunner Asch wrote: On Wed, 23 Nov 2016 15:24:06 +0930, Bluey69 wrote: So when was the last time YOU posted anything visa vis metalworking? Hummm? Dolt. Im in the process of getting (6) chainsaws running. So far 2 are purring like..well..chainsaws...I should have the 3rd up in the morning and there will be 2 more to go. Ever see a Mac 310 with a 12" bar? WTF??? Big enough saw to run a 24-36" blade....wierd... They are part of that batch of stuff I inherited from the guy who flaked out and started to walk away from a FULL 10x25" storage suite. Got my 6 1/2hp Craftsman fired up last week, along with a weed eater and a 4000 watt Onan genset. The Ranger 9 welder/genset is on the list as well. Sometime this week, I have to trim my palm tree at the 40' level, trim back the skunkwood tree overhanging the cargo container, chip it up and then spread it in the cactus gardens. Had a real cloud burst Tuesday night..and found one of my 8' storage cabinets awash. In my den. So I need to go up and tarp the roof. I knew it was getting bad..but didnt know it was THAT bad. Anybody have pocket change to put on a new 1/2 roof? Sigh. Oh..I cleaned up my machine shop, machined a couple 416 SS parts for one of my sailboats and am getting ready to go get my 1989 Aquarius 23. I was going to do it Friday..but they were going out of town for the holidays and will be back on the 27th. So Dolt..what have YOU been doing? Hummmm? Oh Gee, hauling another 30 year old piece of aquatic scrap back to the resident junk yard is "metal working"? Well, I suppose it is.... after all the truck is made of metal. And what was it you mentioned about the guy that abandoned a "FULL 10x25" storage suite" thus giving you the opportunity of stealing everything in it? Yup. A metal workers metalworker. NOT! The term I think you are searching for is "Scrap Yard Worker". Funniest element is that he has the time to phony-brag about how busy he is with all his adventures... while mentioning that one of them is tarping his roof instead of making what are obviously long-overdue repairs. He could reshingle the whole trailer for under a grand, which is 4 months of his cell phone bill to hear him tell it. Or he could have given up tobacco and soda a few months back and used that money for roofing. Oh well - interior water park: just another perk of being a moron who's allergic to employment. Way back when.... people that didn't work were viewed, with considerable disdain, as "bums". Today, at least in California, it appears to be something to brag about. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Belfort Instrument Company DigiWx AWOS SHIT, SHIT and MORE SHIT | Electronics Repair | |||
Is there a newsgroup for metalworking without the political crap? | Metalworking | |||
Is this a metalworking forum or a political forum??? | Metalworking | |||
Trust but verify (metalworking not political) | Metalworking |